uxcell629-2RS Deep Groove Ball Bearing 9x26x8mm Double Sealed ABEC-3 Bearings 5-Pack

It's hard to find much to say about bearings. These bearings are exactly the dimensions I expected. They have smooth spinning action. And for the small 3D printed home project I used them for, they should last forever.

Works great just what I needed

Old bearing in fan went out, replaced work great just like original.

Out of 5 uexcell 626-2RS bearings, two had undersize inside diameters, and would not fit the shaft of a brushless motor I was repairing. One was destroyed in the process of putting it on, and taking it off again when it got stuck. The other 3 fit fine. One of those had an oversized outside diameter, and would not fit properly in the end bell. I got what I needed, but had hoped for better.

These bearings are being used to upgrade the Y axis idler pulleys on a solidoodle 3 3D printer.

Used the bearings for a Herd broadcaster motor. Better quality and what it came with and so far keeps the water out

I wanted to use these to replace the bearings on my vacuum brush roller. This is not my first rodeo working with bearings, have replaced many over the years on many industrial machines as well as cars, motorcycles, and various electric motors and home appliances.You know the drill - remove the old bearing and carefully tap the new one into place by only applying pressure to the race that it pressing agains metal. Well, check this out - these new bearings are smooth right out of the package. I pressed one into a metal receiving cup/pocket as it should be, and it became rough. I popped it out and smooth again. Pressed it back in the metal cup and rough again. Popped it out, and smooth again. Placed it in a vice and put very slight pressure on it, and it went rough again. Checked it against the original factory bearing and lo and behold, the original could be seated in the cup with zero change in smoothness. Absolutely no obstructions, burs, misalignment or goo to get in the way. I also put the original in a vice with slight pressure. Still smooth. More pressure, still smooth. Way more pressure than this piece of garbage, and still smooth.The races on these bearings are soft and easily deformed. DO NOT BUY unless you enjoy frustration or the quality simply does not matter.

Perfect size and quality for coleman ct200u mini bike steering shaft bearings

Very smooth bearings.

great bearings

It was tight, had to tap it into place. Almost too tight.

Bearings used to repair wheels on kids pedal-less bike.Perfect fit as expected.

Good