HUANUOTriple Monitor Mount for 17 to 32 inch Screens, Gas Springs Adjustment Triple Monitor Stand with Swivel, Tilt, Rotation, Clamp & Grommet Kit (Black)

Overall I love this item and unlike my last purchase, which I had to return, I plan to keep this one.PROS:Has two extension arms, meaning you have the middle part that connects to each side, plus an arm AND an additional arm, most would only have the middle part and one extension arm. This means for guys like me with 3 32" monitors you have the option of having them sit horizontally without having to sacrifice, IE one monitor is partially blocked by the other. As I noted I had to return a different brand and that was because of this.Weight - My monitors are roughly 15 1/2 pounds each and I didn't have any issues moving the arms around with the monitors connected. Says a lot about the stability that I'm talking about this product being able to hold a 15 lb monitor on a second arm extension, as opposed to one.Install time - About 10-15 minutes, 20 if you factor that I'm a moron who didn't check placement before setting everything up, then forced to disassemble and reassemble in the proper area. Bad joke aside was straight-forward setup but use your own screwdriver, the one that comes with this is limited.Range - Similar to what I've used in the past. Easy to lift upwards, downwards, tilt the monitor, rotate to portrait. Standard stuffCONS:Only one. The middle pole is a decent size, but not tall enough for me. If you're like me you want your monitors higher to reduce strain on your eyes (I'm 6' so I prefer not having to look downwards so much). In my situation even when I had the middle area at it's highest my middle monitor was too low. I ended up using a stand for my middle monitor instead of connecting. Checked with the manufacturer and unfortunately there wasn't an option to buy a taller stand or add an extension, so while I give this 5 stars IMO it's really 4.5 and only because of this limitation.TLDR - Great product, no regrets purchasing it. Can hold 3 horizontal 32" monitors but middle might be lower than you prefer.

I originally posted a 2 star review and said the mount could not fit 3 32" monitors. That review was meant for another brand, which was the case.I replaced that brand with this Huanuo and it was a night/day difference.The initial setup may be daunting for those who, much like the entitled Veruca Salt, want everything NOW, and proceed to kick and scream when they don't get it.If you have a little patience, and the most basic understanding if mechanics and physics, this stand is amazing.I am housing 3 32" LG ULtragear curved 180hz monitors with this mount, with ease.For those complaining about sag, if you tale two minutes to read the 2 pages of instructions, you'd see there's a set screw on the top of the piston arm to increase and decrease the upward force of said arm.Mine sagged too, as the arms came a little loose from the manufacturer, but low and behold, 4 or 5 revolutions of the screw, and, as if by magic, problem solved.One of the great things about this mount is that there is a separate mounting system for the center monitor, separate if course from the arms that have their own shared mounting system.This is clutch when you're trying to get all 3 monitors to perfectly align with no gaps between the bezels.It's also clutch to keep the center monitor square with the back wall, as one can loosen just the center, square it, adjust height, and then adjust the swing arm heights to it and be good to go.I built the wntire setup first, with no monitors, which seems common sense. I then installed the center monitor and got it to precisely where I wanted it.The last step was the adjust the height of the arms, I did this before installing the two outer monitors, again this should be obvious. I simply used the monitor mounting plates on the center as a guide. I lined up the outer arm mounting plates to it, keeping the arms as straight out as possible to allow maximum movement in both up and down travel.Once I got all the mourning plates pretty even by eye, I installed one monitor at a time to the arms, and positioned the monitors accordingly.Doing it this way, you can semi tighten all the set screws that you never have to use again BEFORE the monitors are installed, again, common sense, I know, it's difficult, and the only screw left to adjust is the arm piston screw which is on top amd insanely easy to fet to after the monitors are installed.This mount is crafted like a brick poop house and it's easy enough for a child to put together successfully, quite honestly.In comparison to its competition, in which I have been very courteous as to not mention names, this Huanuo mount is easily a clear winner.Have a little patience and, more importantly, be smarter than the thing you're working on.