Cabinet Lighting Kit Flexible LED Strip Lights Kit with Cabinet Sensor Switch for Gun Safe Cabinet Closet Pantry Wardrobe Lighting (6M)

The media could not be loaded.  I finished putting together a wardrobe in the basement, which has poor lighting, and decided to put some LED lighting on the interior. I thought about using a standard on/off switch as I had done with previous projects, but decided an automatic switch would be easier.Although I had many of the components already from previous projects, I went with the bundle due to the price point vs sensor alone. All of the components seem to be high quality and were very easy to work with. I especially appreciated the LED strand which had a long presoldered wire (maybe 3ft long) and a screw on barrel plug instead of the the typical 3-4in wire with a fixed barrel plug. This allows for customization of the wire length without additional soldering or barrel plugs/connection points.As for the sensor itself, it worked perfectly the first try and operates exactly as advertised. I placed it in the top corner of the wardrobe and it operates after opening the door about 4 inches. It senses any object (Door, person, etc.) so I would suggest putting it in a location where the person opening the door won't block it. If you have no such location, then you may want to consider a different method (magnetic on/off switch).To sum it up, if you're looking for an easy way to automate lighting within a cabinet/wardrobe look no further. I highly recommend the sensor and if you want all of the components to complete the system, then the bundle is worth the price.if your looking for all of the componants

Was easy to install since I had an outlet in the closet. I bordered the inside door frame, installed the sensors switch and worked like a charm. Light was sticky enough to hold, did not require staples, yet. Plenty of light provided. Check out the photo.

It works great and lights up my gun safe very well. It was easy to install and to put together. Instructions were easy to follow and looks awesome! Recommend it for gun safes for sure. Love it.

Excellent brightness and it lightens the entire closet very well (I used 2 of these for a hall linen and a pantry closet). There was some adjustment of the sensor to the door expected from the other reviews, but following the suggestions, they work well. My only complaint is with the lights themselves. they do not have any protection over the circuit. this means anything conductive that hits the lights just right when they are one can cause the circuit to short. Just be aware of this where you mount them. I have purchased other LED light strips (under counter) that are insulated with clear rubber over the board to protect them. At this price point though, as long as you make the precaution in advance, they are well worth the cost.

Very easy to install. I ran one continuous strip around my pantry door. The only challenging part was the corners. But I simply left a small loop of the light strip at each corner and was able to make the 90 degree turn without any problems. The adhesive on the back is very strong, so leaving the corners unattached will not affect the rest of the light strip.

I remodelled the foyer in my house and put these around the trim on the inside of the closet. They light up the closet very well and you can't tell where the light is coming from.The on/off sensor eye that comes with it doesn't work well. It has to be withing a couple inches of whater you want to trigger it. I bought a motion sensor to replace it and it works great and detects motion from up to several feet away. Now the lights come on when you open the closet door and go off after 30 seconds once you close them.The light this set puts out is white. No blueish tint and not warm either. Just a nice white.

This light kit was just what we wanted. It lights up our kitchen pantry perfectly. I had to install an outlet in there, but it was so worth the expense.The downfall for this product is with the adhesive on the strip lights. I first cleaned (really cleaned) the door trim surface with rubbing alcohol pads and let dry. About 2 weeks after mounting the light strips, they are already starting to come away from the trim and sag. I've had great luck with other brands of light strips, but this one seems a bit cheap. I may have to replace all the adhesive and although it's not a tough job, I shouldn't have to on a new product.

Very easy to install. One of the three connectors had a wire broken but I didn't need it to light up my entire save. I would but again if I had another save. I guess I have to buy another safe

The media could not be loaded.  Very happy with this, used it for a closet which I'm in process of converting into a pantry. I found it was the best price for a product that included the needed accessories (door sensor + junctions + power supply).Only mistake I made was when cutting and connecting the pieces using the supplied jumpers, I accidentally mixed up +/- between strips which caused the last section to not light up. Found out AFTER sticking the entire thing to the wall. Luckily the terminals are accessible from both sides of the tape. I used goo gone to remove the adhesive from the backside and just flipped the connector. Worked without having to remove the entire strip.Found the adhesive was good for this vertical application. I cleaned with 50/50 alcohol/water and did a rough sand before applying and it stuck quite well.Definitely recommend if you are doing a closet like I did!