Mount-It! Dual Monitor Mount Arms | Double Monitor Desk Stand | Fits 2 Computer Screens 19 20 21 22 23 24 27 Inches | Heavy Duty Full Motion | Sturdy Double C-Clamp Base | VESA 75 100 Compatible

My first review of any amazon product. I have purchased 2 of these units, and in both cases found them to be acceptably sturdy, pretty easy to install (the second one is always easier) and most importantly, handles the weight of big 25" monitors. This is partly because monitor weight has dropped. but it wasn't long ago that you could easily spend $400 for a dual-monitor mount like this. Part of why I recommend these is to make it easier for folks to get 2 big monitors. When coupled with your laptop, having all the screen area makes your work so much more efficient. You can pay for the $50 - $60 cost in just a few hours of use. A pretty good product for the price, no downsides come to mind.

I was skeptical... As one of if the less expensive desk mount monitor arms available I worried this might be cheap. In fact it is very robust, adjustments are smooth. It was easy to assemble, though the directions are pretty spartan--really just pictures. I am not sure you'd be able to put it together wrong, there's really only one way. Attaching the actual monitors and cables is the toughest part. One little cable clip arrived broken, so I have just the one where you could have two. It's not an issue. There are spring clips that took me a minute to figure out. I used them on the individual arms to hold each monitor's cabling. Would buy it again and have recommended to colleagues.

I purchased this monitor arm in order to get my monitors up and off the desk to allow me to create some more work space. The product excels in doing this. It's have a very sturdy construction, and has no issues keeping my monitors elevated up off of the desk. It uses standard VESA mounting, so it's compliant with a number of different monitors out there (I have 2 ASUS 23" monitors). The height and horizontal adjustability is on point, and I love how you can rotate the monitors to portrait easily (I have one in landscape and another in portrait for spreadsheet work). The build in cable management does a good job of keeping all the cords under control. The mounting clamp holds everything solid, and does not harm my 2" thick wood desk top. overall this is a great product for me

I just set up my stand and it is very solid, fits my desk thickness perfectly, and was easy to construct. I like that there is a little neoprene padding under the top of the clamp to keep from damaging your desk top.When installing, my tip is to put it at a lower height so you can screw the pads onto the back of your monitors while they are still stable on their stands. Once attached, raise up the arms and remove the monitor stands.The only reason this doesn't have 5 stars is because I wish there was a way to adjust the overall height of it without going to the back of my desk and loosening the screw, then hoisting up both monitors. Looking around on Amazon there aren't really any that do this, but it seems like it wouldn't be a huge deal to add a hand crank to raise and lower the whole assembly by an inch or two at a time. Don't get me wrong, the height is fully adjustable, but it's not super easy to change because they probably assume you want your monitors at generally the same height in relation to your desktop surface. I have a motorized standing desk and change positions a lot, so having that flexibility would be nice. However, I can overcome this by doing horizontal and tilt adjustments which gives me lots of neck exercise.Overall, great product, I am pleased and this feels very sturdy/well made.

Maybe this would work out better with someone else. The product itself is pretty sturdy and can handle the 34" LG ultrawide and 24" Acer I have on there, but getting to that point was near impossible. The Acer mounted fine, but the VESA mount for the LG didnt fit, and I had to cut away plastic on the housing to get it to halfway tighten. The supplied thumb screws are shallow and cheap (I stripped one out the first time getting them to thread because the phillips head is plastic) and after about an hour and a half of shaving plastic away, I finally got it to mount and tighten (the "curved" set of mounting screws/bushing/spacers were may too long for the monitor mount holes), but then I ran into the problem of tilt. The bar that they say you have to tighten once you make your tilt adjustments do nothing. In order to get the tilt to stay, if your monitor is at the high side of the 22lb limit, is remove the monitor and tighten the locknut in the center of the 100x100 mount. First time I tightened it too tight and couldnt adjust, so I had to remove it again. Now im tired of playing with it after I loosed it up just a little but, and the monitor will hardly stay where I adjust it and droops down instantly. I have to use the mounted Acer to hold it steady.The supplied clips to run your cables through the arms are also pretty cheap. I inserted one into the arm holes after setting 2 cables through, and went on to the other ones and about a minute later it snapped in half and went flying. They are very thin metal, so I would suggest not squeezing them unless you have to. Insert them through the arm holes horizontally and then rotate them 90deg in order to set.Like I said, I believe this is a good product, but doesnt include enough hardware for more tricky monitors, and the instructions on adjustability are sometimes unclear. For mounting lighter monitors that have the Vesa mount holes on the most outside, not recessed, part of the back, it will do great.

Very nice and sturdy, arrived in excellent packaging and just as described. Easy to put together and was missing nothing. It is heavier duty than I expected and is working very well with 27" Acer monitors. Will buy another for my other work station. Is best suited for getting the monitors where you want them and securing all of the movable parts with the included allen wrench. I am not sure I would want to use this mount for a workstation where I have to continuously change the positions.

This is a very good product, very sturdy and easy to install. All components of this stand are made of steel, NO PLASTICS! The main post and clamp are very strong. The articulated arms work very well, however changing the angle of the inner arm joint (at the post) requires some effort. As with any stand, the bigger the monitors used with this device, the less range of motion, but I was able to get my two 24 inch monitors installed and placed to suite my needs. The only small issue was the little metal cable clips, one broke and the other kept popping off, but in the end I didn't really need them. The clamp is large and requires a lot of clearance. In my case I ended up having to cut a hole in the front panel of my desk to mount the clamp.

I'm using this in the office to clear up desk space and get my two monitors (24") to an ergonomic height. The mount articulates in every possible way I could need to achieve my ideal setup, and that comes with the added bonus of being able to show my monitors to people in my office space without anybody having to move from their seats (nice). In my case, the mount and monitor setup is as sturdy as my desk is; there's absolutely ZERO wobble unless I start really going ham on my desk. Other reviewers have mentioned problems with the cable clips, but mine are doing just fine.One annoyance: Setup was a pain, even following the instructions, with one person. This is because the instructions have you fix the mount to the desk, THEN attach the monitors. It might be easier (if more precarious) to attach the monitors first and then attach the mount to the desk. Or just find a friend. The annoyance of setup isn't worth knocking off a star or anything, but it is something to note.

Fantastic product. The price was very reasonable (cheaper than most other products I reviewed), yet build quality is top-notch. It was easy to mount and holds both my 22" LED monitors extremely sturdy.It adjusts easily to provide the required viewing angles, and maintains position without any slipping/movement.I would recommend this product to anyone looking for dual monitor mount!It arrived quickly, well packaged, and was exactly as I had expected.Another outstanding shopping experience from Amazon.ca

Sturdy and flexible but the clamp couldn't mount to my desk so I needed a stack of cards between the clamp and desk.

Lots of flexibility for different configurations. I have 3 monitors, and I got a bit creative with it:I have one mounted vertically, another horizontally, both set to highest point, so that I can put another monitor under the horizontal one, on its own stand.