AKKON - For 2006 2007 2008 2009 Toyota 4Runner LED DRL Projector Chrome Headlights Lamps Pair

These fit my 2008 4Runner Sport Edition perfectly and I did not need to make any modifications to fit properly. I am not sure why another review said this. Installation was very easy. The white LED Strips are very bright and visible even in daylight. I have had them installed for over 9 months already and they still look brand new. There are no leaks and no fogging on the inside. There is also no problem with the casing behind the turn signal being black instead of reflective. The turn signal/parking lights are still very visible. Another reviewer mentioned the LED strip is the Daytime Running Light (DRL), but it is not. The orange turn signal light is the DRL since it is the light that is still on when the lights are switched to the ‘off’ position. This way, you can have the option to have the LED strip on or off. See below: Lighting sequences: Off: Orange DRL light only Middle: Orange DRL and white LED Strip are both on (with this setting, the lights still turn off automatically after turning the car off and opening the door) On: Headlights and white LED strip only (No orange) (all turn off after turning the car off and locking it twice with the key fob. Other wise it turns off automatically after 1 minute) The turn signals are and always will be the DRL (unless you do a DIY modification with the wiring). This is how it is with the original lights and these new ones. This was not meant to change with this new assembly, so I’m not sure what other reviewers are complaining about. The assembly does come complete with all the bulbs. They are projector headlights so you need to adjust the height. This is very easy to do with the gears on the back. After nine months, still no condensation on the inside and no signs of the outer casing getting ruined from the sun (it has always been parked outside). I provided plenty of pictures and I would highly recommend these.

These are cool. I put these on my 2003 runner, the bolt up fine. I had to do some creative wiring, but it's all worked out. First thing I did was spray the lens with UV protectant clear spray paint to keep them from yellowing (it's worked thus far). The truck is in Texas and parked outside so it's in pretty harsh conditions. The included bulbs, I had to get an adapter pigtail for. I'm not sure if the bulb or pigtail went bad but I do need to finally install a new bulb. I really liked the included bulbs, the lows were nice and warm and were a natural color (vs. that crazy blue LED color you see) which I really liked.

At first I loved these lights, got them and put in some LED lowbeams and they looked great, the LED strip is bright and doesn't look cheap at all, overall the design is a 9/10. Install was a bit tricky due to the factory mounts but cant blame anyone but Toyota. Fast forward 1 month in, drivers side is starting to peel from top down, barely noticeable due to color of the headlight but still not acceptable. fast forward another 2 months and I move from dry California to wet Georgia and the passenger side lens is now filling with water and constantly fogged. LED strip soon after stops working and the headlight is basically dead. contacted customer support but they refuse to stand by their products because it was past the 90 day warrantee, figures with this Chinese crap they only do 3 month warrantee because they know it wont hold up. Now i have to pay out of pocket to get these replaced only after having them for about 6 months. If you do bite the bullet on these, do your self a favor and seal with silicone, YouTube has tutorials for this, when it comes to peeling there's no preventing it, i kept these headlights waxed but they still peeled, you will have to sand them down and polish and put new clear or just deal with it. WOULD NOT RECCOMEND

These look fantastic. I installed these on the 2008 4Runner. It was a little challenging getting the last bolt off but everything else was super easy. It took me about 2 hours from start to finish.

I dont really leave reviews but this is an exception. First off I gotta say the build quality of these housings are absolutly amazing! They dont feel cheap, and they have a nice weight to them. I bought the chrome version and I like the look a lot. The chrome isn't too shiny and has a slight smoke to it. The fitment of these housings is just like OEM. I originally had housings by eagle eyes and the fitment was nothing like stock and they got moisture in them within the first month of having them on. The Day Time Running Light (DRL) is absolutely amazing too. Super bright and it looks modern. It definitly makes the 4runner look sportier than it is. The projectors and high beams parts are really good. Much brighter than the eagle eyes I had on the truck before. These would definitly be a major upgrade for stock housings as well. Partner these up with LED low beams, high beams, and fogs you'll have a very good looking rig. Very well designed and is definitly worth the upgrade. 2nd off I love the fact that these housings coming with replacement bulbs for everything so if you still have the old halogens and indicators from the factory this is a great touch and I feel like more manufacturers should include new bulb. Especially since they're not that expensive. Just keep in mind the plug for the side marker is a little finicky. Took a good amount of time trying to get the plugs to line up. But once they did it wasnt hard getting them to click into each other. I do have one complaint however which is the reason for 4/5 stars. The LED Daytime light doesn't actually replace the factory DRL. To properly use this as an actual Daytime running light, you have to move the switch to the 2nd position to actually use them. which is a bit disappointing. I'll be calling akkon later on in the week to actually find out if this is how they're supposed to work. But overall they're absolutly amazing. I'll update this review if they get any moisture in them within the following weeks or upcoming months. But I would definitly reccomend picking up a set!!