PERLESMITH Universal Floor Speaker Stands for Surround Sound up to 22 lbs

These Perlesmith universal speaker stands are exactly what I needed. Super easy to assemble, height adjustable, and they feel really stable and well-built. The black finish looks clean and they blend nicely with my setup. Holds my surround speakers perfectly (both bookshelf and small monitors). No wobbling, and the cable management is a nice touch. Much better quality than I expected for the price. If you’re looking for reliable stands without spending a ton, these are a solid choice! 👍

I really like the look of these stands. The tempered glass is nice & thick, and should be much easier to clean than MDF stands. I really like the larger floor base and speaker base. It should keep even the bigger bookshelf speakers very steady. My speakers are 7 1/8" wide x 11" deep and the placement looks really nice. Assembly was fairly straight forward. All the bits and parts were included, and everything fit together as expected. I love the larger floor spikes. Shaped well enough to keep it steady on the carpet without piercing too deep into it. I do have some complaints, none of which is worthy of a ratings ding. If I ever have to move the stands and/or replace the cables, I think I'll probably have to take it apart to get the speaker cable to thread through the bottom hole and come out the top hole. I have fairly thick, molded banana plug cables. On assembly, I ran the cable through the detached tubes before connecting them and attaching the ends to the plates. The center support rod came in two pieces, and there is a nut in the middle where the two pieces connect. I am certain the plugs will snag on that nut if I were to pull or push the cable through the assembled tube. I'd really rather not have to tug & pull to run a wire through. This is probably not an going to be an issue with thinner non-molded cables. It would have been better to have designed some form of cable management outside of the tubes. Also, the edges of the holes for the cable management are not smoothed out, so be careful about pulling cable through and rubbing on the edges. They're not super sharp, but they will scrape your cable if you pull hard and tight. Finally, here is no notch or guide (at least none that I found) that will allow you to make sure the top plate and bottom plate are correctly aligned. It may be an OCD thing to want to sides of the top & bottom plates be perfectly aligned, but most people will probably be ok with "close enough." Overall, I am very happy with these. They do the job and they look great!

These stands have both strengths and limitations worth noting. Cons: The stands are not height-adjustable. Speaker wire must be threaded through the pole before attaching the base plate, which may complicate setup. The top plate only uses non-slip pads to hold speakers in place, with no additional securing mechanism. Pros: Attractive design, featuring a glass base that lends a modern, upscale appearance. Straightforward assembly, easy to put together with minimal effort. Stable on both carpet and hard flooring. Sturdy enough to support bookshelf speakers (currently holding Klipsch R-41M speakers without issue). While the lack of adjustability and limited speaker security could be drawbacks for some, these stands are stylish, easy to assemble, and reliable once in place. They are a solid option for anyone seeking a simple and visually appealing solution to display and support bookshelf speakers.

Easy to assemble, you need a screwdriver to tighten one screw in and to adjust the width of the speaker holder. Assembling both stands took around 15-20min. Material seems nice and sturdy. If i were to accidentally knock the stand it wouldn’t trip over, the actual speaker holder you can adjust it so it holds the speakers sturdy ass well.

Love these stands. They were easy to put together and they look good in my living room.

These are good looking stands and were quite reasonably priced. However, they are only held together by a pair of threaded rods that run through the hollow center post and screw into the top and bottom pieces. The center post isn't really attached to anything at all, it's just held in place by the top and bottom pieces. The speakers I'm using with these stands are fairly lightweight and seem to be supported well enough for now, but if you are using heavier speakers with large magnets or active monitors with integrated amplifiers, I advise caution. As long as the stands aren't moved, this delicate arrangement of threaded rods should tend to hold, but I do worry that vibrations could work the threaded joints loose over time and cause problems. After all, these are meant to hold speakers, and speakers do vibrate. Even so I would still recommend these for setups with inexpensive speakers, where aesthetics are more of a concern than stability; if your speakers are not both inexpensive and lightweight, you may want to consider paying proportionately more for stands. Another issue I encountered with these stands is cable management. The hollow center posts could potentially have cables run through them, they do have openings at the top and bottom apparently meant for this purpose. However, there's no straightforward way to actually get cables in place; professional stands have an open channel that runs the entire length of the post so that one can easily just pull the cable through the stand. Naturally, this shortcoming can be worked around - other reviewers suggest routing the cables while assembling the stands - but it is a further indication of a product that isn't particularly well thought out. Even if you do manage to get the cable through the post, it'll still be visible at the bottom of the stand because the lower opening is above the bottom plate, rather than running through the bottom plate to the floor. Furthermore, I had hoped there would be some sort of leveling capability with the feet on these stands to help compensate for slightly uneven flooring. To be clear, this is not an advertised feature, just one I had hoped for. In fact, the feet can be individually partially unscrewed to provide a limited form of leveling capability, but then of course the same issues I've pointed out with the center threaded rods apply, vis-a-vis potentially loosening over time. Moving forward, since I already own these stands, I'll probably disassemble them at some point - before they have a chance to fall apart on their own - and apply threadlocker or PTFE tape to the threaded rods and feet to address my concerns about long term stability. I might even drill a hole through the bottom plate so that I can implement a tidy cable management solution. Until all that is done, I'll wish I'd bought better stands in the first place.

Great product! Very easy assembly, sturdy/stable and properly aligned threads etc… excellent 💯

I purchased these based on the near five star reviews. The ratings are dead on - it's near five stars! First off, the quality of the materials is quite nice. Nothing cheap here, the heavy glass base and top have a very luxurious look and feel to them. Metal components quite solid, very nice sized holes to run speaker wire through. nice packaging for the screws and everything. Easy to follow instructions. Height is perfect for sit down listening enjoyment. Now two flaws, which may or may not be annoying to people who buy them. First annoyance, if you have nice a glass base and top, do not put stickers on them with near impossible to remove glue! It took me nearly 10 minutes to remove the glue and reside the labels left behind on the glass. Come on! Second, I echo the concerns others have about there being no way to secure the speakers to the top of the stand. May or may not be a problem depending on where your stands are located but being constantly worried about your nice speakers being bumped off the stands is a legitimate concern. I've opted not to trust the rubber pads the stands come with and to err on the side of caution by securing the speakers to the stand using Command strips, but something like this would have been nice to have come in the package. Overall, very nice stands for the price, especially when they're on sale for under $50! Update: I've found a third annoying problem with these stands. As seen, the stand's post comes in two parts that are not screwed together and there is a long rod that connects the top to the base. This makes threading even modest sized speaker cables through the middle to hide them a very frustrating job.

I just needed a pair of affordable speaker stands but didn't expect the quality to be this good. What a pleasant surprise!

It’s a shame I couldn’t find a good quality and strong stand locally, but I’m glad I found one. Perfect for the rear speakers of my LG Soundbar (S95QR). The tube isn't wide enough to let the power cable pass thru but still super happy with this one.

I couldn’t be happier with these Universal Speaker Stands! The build quality is excellent — solid, sturdy, and surprisingly lightweight. Adjusting the height from 33.5” to 46.9” was super easy and gave me the flexibility I needed to get the perfect sound positioning for my room. They securely hold my soundbar without any wobble and I am sure they will do an even better job at holding the speakers that are definitely light-weight than a soundbar. The design is minimal and modern, which fits perfectly with my setup. I also appreciated the integrated cable management feature — it keeps everything neat and clean-looking. The pictures attached would give you an idea of the maximum height of the stand. If you’re looking for speaker stands that offer great value, durability, and adjustability, this pair is a no-brainer. Highly recommend!

O pedestal é muito bom. Discreto, fácil de montar e atendeu às expectativas. Porém eu paguei quase o dobro de preço na taxação do produto. Algo que o vendedor não informa na pagina do mesmo.

Happy, good stands