OVERTURE TPU 95A Flexible 3D Printer Filament 1.75mm

The OVERTURE TPU Filament 1.75mm worked perfectly for printing tires for my model 911. The flexibility is spot-on—not too soft, not too stiff—and it gave the tires a realistic rubber-like feel once printed. Layer adhesion was excellent, and the finished prints came out clean and consistent. It printed smoothly with no clogging or feeding issues, and stringing was minimal with basic TPU settings. The filament stayed flexible after printing and held its shape well, which is exactly what you want for scale tires that need both detail and durability. Overall, this filament exceeded my expectations and was ideal for this kind of application. If you’re printing tires or other flexible parts for scale models, this TPU is a great choice and I would absolutely use it again.

OVERTURE is my go-to filament, and this TPU is no exception. I used it on my Bambu A1, and it printed exactly as expected. The filament is consistently sized, feeds smoothly, and produces clean, flexible parts without any tuning headaches. I’ve had no clogs, no inconsistent layers, and no surprises mid-print. The 95A softness strikes a good balance between flexibility and strength, making it easy to work with while still holding up in practical use. For the price, the quality is hard to beat. If you’re looking for dependable TPU that just works, this is an easy recommendation.

Always heard printing ABS was a pain (especially with warping),, however, this stuff printed great. I'm printing some 2.5mm thick panels,, and no sign of warping, along with good stiffness. Almost feels like a factory part.

This filament brand has been wonderful and their TPU printed reliably and came out good. The temperature is about the same as PLA just need to print a little slower because of inevitable stringing.

DRY THIS BEFORE YOU PRINT, even straight from the bag it ships in. This printed fairly easily on my Bambu X2D, after doing all the typical stuff to set up for flexible filaments. However, this stuff is WET out of the package and printed like cheese at first. I took the first roll straight out of the package and immediately loaded it into a dry box and popped out the benchy on the left. I then dried the roll in my printer (90C on the bed for 16 hours) and ran the same g-code again to make the one on the right. I'll dry it even longer before doing more important prints. Kind of annoying that it ships like this but at least I'll get some good use out of it after drying!

At first I was rather displeased with this filament as it wouldn’t print very well at all. However that was entirely my fault as I adjusted the setting and now it prints cleanly and makes a good end result. Bed adhesion is pretty decent on my textured build plate. This filament has a pretty matte finish and is truly black. Around the same price as a spool of PLA and is a good value. It only says it’s 95A hardness but it actually feels quite soft and flexible. I have no complaints about this product.

This was my first experience with 95A TPU. I first dried it for 4 hours at 70C. Easy to bypass the filament buffer and prints beautifully in my Bambu P2S. Prints are soft but strong. Will buy again.

This prints very different from PLA and you're going to need to dial in your settings so be prepared to waste some material. Mostly, crank up your nozzle temp and slow print speed down. Once I got my settings dialed in, the prints came out nicely or as good as I could hope for. You could definitely use this to print for example; rc car/plane wheels, or other custom flexible parts. I found its a good balance between flexibility and toughness, but not very stretchy like a rubber band. Even test prints that were just a few layers thick, think a TPU pancake, held up surprisingly well. I am satisfied with this product so far and it's a fun material to expand what you can potentially 3d print that you otherwise wouldn't be able to do with PLA or other similar rigid material.

Excelente filamento

wow... id never printed TPU before... and this is crazy, but anyway it was great, very flexible, but very tough. I printed it very slow and on their recommended temps on my Kobra 3, and it printed flawless. Will buy again