Dorman 49449 Windshield Wiper Linkage Bushings | Fits Select Nissan Models, 2 Pack

I bought these to fix the wiper arm linkage on my wife's 2005 Nissan Murano. Amazon says they don't fit, but I can assure you they do. It seems that Nissan used these bushings on a large number of vehicles in the 2000-2015 range, maybe others. Save yourself $100+ dollars for a whole new wiper arm linkage assembly and buy these instead! I thought I would be able to replace them without removing the linkage assembly from the car, but the fit of the bushing in the metal arm is so tight, you will never be able to do it. I found it easiest to use two deep well sockets and a bench vise. One socket on the back of the bushing and the other on the other side of the metal arm. This kept everything perfectly square and had no issue getting the bushing in on my first attempt. Guess I didn't need to buy two packs (4) for spares in case I broke any.

If you have a 2003, 2004, 2005, 2006 or 2007 Honda Accord these parts are not the right part for you. They will work but fit loosely and the linkage arm will pop off and get bent, which will mess with the wiper sweep alignment. Use 49447, there’s a set of four in the pack that will work, they will be tough to get in, soak them in boiling water for a minute then insert them. Unless you are extremely coordinated you will probably need two people to do it, one gripping them with pliers and the other poking the remaining clips with a smallish flat head screwdriver. I gave 5 stars because it’s not there fault they didn’t fit and seem like a durable product.

Easy to install. However these bushings are junk. Better off just buying the assembly and reattaching the motor. The price is right but the product simply doesn't work.

These worked pretty darn good for my Acura CL 97 3.0 and, I assume my model is also the same as 98-02 Accord. It was very hard to replace the one broken bushing because it just wouldn't go in and, after like 30mins of trying to shove this thing down, it finally budged. I read something about leaving it in hot water for a bit, that could possible help.

Says it fits 95 Nissan King Cab XE, does not.

I saw multiple reviews commenting about these working on various Subarus, I have a 1998 Legacy Outback and was hoping these would work as there was noticeable play in the linkage. Took the wipers and cowl cover off, went to pull the motor out and found the bushing that attaches motor to the passenger link was bad. Ordered two packages of these as a total of four are needed if you replace the set. I found that they do not work for this year make model Subaru and the online catalog says as such, again, just thought it was worth a shot as several have made this set work. Here is the kicker: calling Heuburger Subaru I found that on the first call, the parts guy told me the bushings are not available without buying the pivot - meaning the part that sticks through the cowl that the wiper arm bolts to. $56 bucks a side, two required. That did not sound like Subaru to me, they are usually more "friendly" about breaking small parts down to component pieces. Looking online I found that the parts guy was not correct, Subaru sells the link with bushings for about $12 each, two required. That is a bargain, you get the two links (one from motor to first pivot, then another fo ther first pivot to second) tremendous time saver.....wish the Dorman stuff had worked but seeing how long it takes to press bushings in and out versus popping new rods in is a no brainer. Again, no fault of Dorman or Amazon, just me taking a shot at what others had said in reviews. By the way, the Dorman bushings do press into the links if you warm them in hot water (careful!) but the ball that presses into the bushing at the pivots and motor pops out far too easily.....go the Subaru parts department route if you can get the guy to find the right parts.....

I ran out to options my wiper linkage brushing wore out on my 2010GMC TERRAIN SLT couldn’t find part on internet dealers said I’d have to buy whole linkage and wiper motor. I pull linkage a decided to try these based on what I thought I needed. Even though in description it said these will not work on my truck the were perfect fit. Kinda tricky to install I figured it out and am very happy with brushings

These simply do not fit / work as good as factory. Find a auto parts store that will warranty a new part and buy the whole transmission. I bought one from a junk-yard and it failed in about 1 month. Not happy about that. The new transmission would be about 100$... I tried these parts and a used part and neither worked for very long.

Works as it should. Will have to see if it will hold up.

Soften up in boiling water for easier installation.

Tried installing and just shattered

I bought these little plastic pieces because my car's wiper linkage bushings failed. Dealership told me they don't sell these $0.50 cents plastic bushings and wanted me to buy the whole wiper assembly for almost $400. I fell back on the internet, Youtube and Amazon. MY car is a NIssan Murano 2011 and for some reason the entire internet doesn't have these things for my car, came here to Amazon and it told me this won't fit my Nissan Murano. I took the chance anyways because the bushings looked similar. While reading some comments in this very section I learnt that many DIY people spent hours trying to push the plastic bushing through the hole of the linkage arm, many of you broke your new bushings. I saw a comment here about boiling the bushing in water in a pot. I did it, it worked like a charm! Pushed the bushing right through the hole using my fingers effortlessly! So here's the deal, grab your plastic little bushing and boil it in a pot of water, take it out with a plyer and immediately push it through the linkage arm!

Se ve buen material, desafortunadamente no le quedaron a mi Almera 2002