Bidet T Adapter with Shut-off Valve: 3 Way Brass T-valve for Bidet 7/8”X 7/8”X 1/2” - Tee Connector Leakproof Adjust Water Pressure Toilet Attachment Bathroom Installation

Best long lasting product and quality product than the plastic ones you will get

Easy to install, no tools needed

I had a Luxe T-Adapter before for my Luxe Neo 110. Moved to a new place, and for the life of me, could not get it to thread properly, or get it installed without it leaking or spraying water everywhere like crazy, no matter how little water pressure, and no matter if I hand tightened or used a wrench or anything. Struggled with it for a while, drove me up the wall. Had this delivered, and it was installed within 5 minutes, 100% leak free. Only hand-tightened. Threaded absolutely perfectly, zero strain, zero issues whatsoever. It just went on and worked immediately. The Luxe's joint from the basin nut to the adapter was threaded with a gasket as well (so the nut could be removed from the adapter), which was problematic. Trying to adjust the orientation could loosen the nut or introduce leaks. Pretty poor design, IMO. This one, the nut spins freely but does not detach from the adapter, allowing it to rotate freely while still maintaining a tight seal. 1,000% better. Highly recommended!

I have 2 bidets , one with this valve and 1 without. The wide open pressure/volume is definitely lower and softer with the valve but I think it is due to the restricted size hole. The valve doesn't seem to effect pressure/volume much. I kept it installed and communal bathroom in case someone inexperienced uses it

If you own a bidet, I'd highly recommend getting this. We had a situation not too long ago where the knob on our bidet broke, and there was no way to turn it off. The valve on your toilet hose does not turn the water all the way off. It was a fiasco. When we bought a new bidet, I made sure to get this as well. I really like that this is entirely metal without a plastic connector, and it does its job as intended. We tested it, and it turns the flow to the bidet all the way off! Very happy with this peace-of-mind purchase.

IF YOU LOVE YOUR LIFE, you must get this! Ok, so I bought a be-hind water-boarding contraption, also known as a bidet. While reading the reviews for the bidet, I noticed one review strongly suggest getting this shut off valve, and something in the back of my head told me to take their advice and get it. So, I did. Oh this thing is a must for anyone who doesn't want their intestines drowning from the high-power power washing inside your hole. This adapter changed everything. That's right, it's a must or your butt will bust! Now once you put the adapter on, you can control the amount of water goes through. You can have it wide open like a Bidet extremist so you sit there looking like a water fountain statue as water shoots out of every hole you have. Or you can adjust it so it's like you have the nicest hospitality worker asking you, "Are we ready to be cleaned?" Why yes, yes I am. You should too.

I ordered this product to attach a bidet to my toilet. I was initially concerned that it may be cheaply made or possibly even plastic. But this product surprised me. It is a very good quality piece. It looks nice in my bathroom as well as functions properly. And was easy to install.

This is the 3rd one of these I ordered. The first one I ordered over a year ago had a cone washer and 2 flat washers. The cone washer worked the best. The last two I ordered the cone washer was missing in both packages so I returned both of them. The manufacturer needs to inspect there product before shipping. The description says 1 cone washer and 2 flat washers included. There’s even a picture of them. I read the low reviews that say it leaks. I’m guessing it leaks because they used the flat washer because there was no cone washer included which works much better. I’m going to try a different manufacturer for a t-valve hopefully with better quality control.

Not well made

This was the perfect connector for a bidet seat. Loved that it has a shut off valve for the bidet seat (if the bidet seat ever broke, or you removed it, you can just shut the water off to the bidet seat, and continue to use the toilet. No leaks, easy connect and looks great. For my installation, the water supply hose to the toilet tank is 7/8", and the bidet hose is 1/2". So the bottom of the tee (7/8" male) connects to the top of the existing tank hose (7/8" female), and the top of the tee (7/8" female) connects to the tank (7/8" male). The bidet seat hose (1/2" female) connects to the side of the tee (1/2" male).

I like it coz easy to install and value for money

Premium quality for an affordable price.

Very durable and easy to install. I purchased 2 units and one unit leaked at the end that attaches to your tank. I tried using teflon tape but it didn’t work. I emailed the manufacturer and they sent me a replacement at no charge within a few days.