Front Bowtie Overlay Decal Sticker - 2010-2013 Camaro

Love it and so easy to do . I have to order one for the back symbol but going to try and put the second one that came with it on see if that works first .But it defiantly made my car look. Better

I have a 2SS/RS Convertible, Red Jewel Tintcoat and all of my accents are black (rally stripes, shark gills, etc). I found this product easy to use if you follow the instructions. I am no decal expert but you need to be patient and work carefully. The product is excellent and there are professionals that can help you apply if you are not skilled. 1. Perform this procedure on a warm day or have a blow drier available to heat the decal before application. 1. Spray the car bowtie and remove backing from decal. Spray the decal backing with water. This will allow you to reposition the decal if not perfectly aligned. 2. Align the center of the bowtie and attach the center only, leaving the two sides dangling. 3. Working from the center, press outward to the left edge, making sure there are no creases and minimizing bubbles. You will always get bubbles and this can be fixed later. 4. Once the left side is done, repeat for the right side. 5. You will see bubbles. Apply your blow drier to heat up the decal surface, then push the bubbles to the edge or break them up as best you can. I recommend you come back in 48 hours to fix the remaining bubbles. 6. Fast forward 48 hours later. Use a pin to prick a hole in the bubbles and force the air out. No worries, you can not see the pin pricks. Voila, you have a very nice look at a reasonable price!

Perfect fit, easy to install dry. I cleaned with eather ( starting fluid ) after a short wetsand with 500 grit (car is ceramic coated). Gently pealed off backing be sure to not strech viynl lined up top right and left corners then pressed the top and worked down from center and out from there. Used thumbnail on edges. Took 5 minutes to do both. Doing small solid decals i do dry...tint or wraps on curved window is only time to use soapy water / heat if you want best results and adhesion. Matte black front and metallic ice color matching rear, very happy over the gold gm used

It looks great, but was pretty hard to put on. It didn’t seem to be exactly the right size, but it was also the first time for me to use a vinyl like that, so I probably stretched it too much when installing it.

Smooth lines, easy to apply

Excellent quality & fit. Originally purchased front/rear inserts from another company on Amazon that was of poor quality and the front didn't fit properly (was not cut right and didn't cover the original gold insert properly). This one fit great and went on easily following the provided instructions. Insure you use a hair dryer as directed, it will help prevent any problems 'bending' and 'smoothing' the insert as you install it.

It's ok, very thin, wrinkles easily

Awesome look for the front it was NOT easy to install but the back was. If the front one was like the back and had a something to help line it up it would have made it easier to install. After it was all said and done, I used both of them and in the end kinda had to piece a small part using the other one because I tore it when trying to pull off and reposition. But it is a cool look!