SilverStone Black Sleeved PSU Cable for One EPS/ATX 12V 8-Pin Adapter 550mm long PP06B-EPS55

I have absolutely no idea why Silverstone insists on crossing 12v and ground cables to opposite sides (right to left not ground to 12v obviously ) when the pinout is straight through on both ends. just line them up. its the same result!

The 8-pin CPU power cable is the only one I can't get tucked out of the way, but I'm not pointing a finger at Silverstone. Is the cable long enough? In my case, yes, it plugs in fine. Would having a longer cable help me route it more cleanly? Nope. ASRock put the connector right behind the rear I/O ports, smack dab in the middle of the Z87E-ITX. I'd still have to route it across the front of the motherboard no matter which direction I go, length be damned.I had difficulty plugging in the 24-pin and 8-pin connectors. Part of it was me being stupid, part of it was that it wasn't immediately clear which end plugs into the PSU and which plugs into the motherboard. For the record, the 4+4 and the 20+4 connectors go to the motherboard, and the solid 24-pin and 8-pin (unbroken) connectors go to the PSU (duh). The +4 connectors don't stick to their parents very tightly, and you may have difficulty keeping them together when plugging them in in tight spaces.A bit on bending...These cables can fold over flat on themselves, to the tune of roughly 0.1 inch external bend radius (after spring-back, without continuously applied force). This of course creases the cable, and will probably never go back to perfectly smooth at that spot again. Bend radius without permanent deformation is closer to 0.25 inch. The 20+4 pin cable has two layers, and so it won't fold quite as compactly (I can't measure the bend on this one, as it's already in my computer). All other cables have a single layer.Final word: I'm enjoying Silverstone's SFF products for my first compact build, and this short, flat cable set is a nice touch that goes a long way in making a clean SFF rig.

The cables are of excellent quality, far superior to most cables. But look at the PSU connector carefully. You will see that it's 2 rows of 3 (3x2) while some PSUs use 1 row of 5 (5x1) for peripherals. Thus, this cable will not work for some PSUs such as this one 1600W Modular Mining Power Supply GPU For Bitcoin Miner Eth Rig S7 S9 L3+ D3 Supports 6 Graphics Overclocking 90+ Gold 24PIN US Or this one FSP Dagger 600W Mini ITX Solution/SFX 12V/Micro ATX 80 Plus Gold Certified Full Modular VR/4K Ready Gaming Power Supply (SDA600) All PSUs using the 5x1 connector are wired the same. But NOT ALL PSUs USING THE 3X2 CONNECTOR ARE WIRED THE SAME.Let me state that again**Not all PSUs using the 3x2 connector are wired the same.**See the photo for details.You absolutely have to know how your PSU is wired so you do not cause damage. Some people here have already discovered this, they just don't know (or explain) why. This is why.So be careful. Look at your PSU, match the cable connector AND the wiring before you buy.

These are nice, but they could be better. I do like the way that they look in my case. The individual sleeved cables have a very premium look and feel; they are much easier to manage than regular bulk sleeved cables. The biggest problem I would say is that the connectors are way too far apart, it creates alot of excess cable and it makes it almost impossible to connect two drives that are close together. Thankfully I was able to get my 2 HDDs, 1 SSD, and 1 Blu-Ray drive all connected on this one cable without too much hassle. Overall, I would suggest this to anyone who needs to connect more drives or make their cable management better, or both. But I really do wish that they would make the cables between the connectors shorter. I don't even get why they would make them that far apart. Who has their hard drives that far away from each other? Although that did actually help me connect my bluray drive, I would've had to buy a second cable, if they were closer together.

I think these are overpriced for what you get but what options do ya have really?The cables are indeed shorter vs. the ones from the SilverStone PSU. That said they're also a cheaper cable which further make me feel overpriced.The original PSU cables are 16AWG, these are 18AWG (larger means smaller). I noticed right away because these felt soo much thinner.The upside is more flexible but honestly the original ones had been plenty flexible because they are flat. I thought these would be identical just shorter...Shorter cable means you don't need as big of wire but I'd have liked to seen the larger wire on the power hungry cables.Maybe the GPU connector at least? They have it so I can use a single cable to power 2 GPU 8-pins. I don't like the idea of 300W going over these in a single cable so now I either end up with two which leave two butts hanging off of them. (FWIW the original was this way too but thicker cable means more power ability) or just use the original one which is longer but thicker and better rated.The length of the wires we are talking between the original and these don't honestly justify an wire size difference.FWIW the main differences in 16 vs 18 awg is the amount of current supported, how hot the wires get (heat and efficiency) and also voltage drop. Thicker wire are better but obviously you don't want too thick or it's hard to work with but again, the default ones had decent flexibility.IMO these should be 10 bucks cheaper. It comes with a decent amount of cables, actually overkill for me since I only needed a few.I could be wrong but I think the older style used the thicker/better cables too from the looks, but again not 100%.For the average user these are probably decent (still overprices). I am building a ITX gaming rig though with a 980ti and 6700k and 750W PSU so am a bit disappointed in these but I'm sure they will be "okay".

I replaced a 30cm cable from Silverstone with this 55cm cable. I am pleased with the product because it wasn't wrapped with a sleeve. This made it easier to flex and route the cable around components in my SFF case.

no me gusto para nada, comparado con los cables que tengo de la fuente de poder EVGA, este cable es como porqueria. es muy caro y la verdad no tiene los suficientes pines que requiere mi GPU, creo que es gato por liebre, sinceramente no lo recomiendo para nada.

Acqustato per silverstone sfx550-l in sostituzione dei cavi di serie per soft pc-mod. Cavo molto lungo, un po' rigidi inizialmente ma non è un problema. Soddisfatto dell'acquisto.

Precaución si es que Tienes una fuente seasonic no lo reconoce, en una evga funciona de lujo, tienen mejor calidad que los incluidos en la evga

Cable was crimped incorrectly! It was creating a short on power up. Extremely dangerous for the power supply and the graphic card