Folding Shelf Brackets 12 Inch, 2pcs Heavy Duty Stainless Steel Collapsible Shelf Bracket Wall Mounted DIY Triangle Brackets for Table Work Bench, Space Saving Max Load 300 lb

Overall a good product, I used these brackets to make a fold out workstation in my garage, that way when I needed it I could pop it out and when I didn’t need it I could fold it away and my wife can park her car. The brackets themselves are easy to mount just make sure they are straight on the studs when you do mount them, mine are slightly crooked which doesn’t allow the bench to fully fall away when not in use, but that’s my fault. So it doesn’t fold flush against the wall, but I can hardly tell. Also when mounting the brackets make sure you have extended drill driver bits. Because the support arms on the brackets need to be up when mounting the brackets to the studs you need the extended drill bits to run the screws between the support arms and without extended bits it becomes difficult to mount the brackets and you will need to turn the screws by hand with a long screwdriver which becomes tedious. Also the screws that come with the brackets were pretty weak and I just ended up using my own set of torch head deck screws to attach the brackets to the studs. Overall the brackets are sturdy, they seem to hold a lot, they fall out of the way when you need them to and I feel were a good purchase for what I needed them for.

Ordered a set of these to attach a fold-down table to the wall in a breakfast nook. Very impressed with the hardware design and the sturdy construction. They mounted easily, with only slight tweaks to place the table top dead level. Latch mechanism easy to use, and the whole shebang stays out of sight, open or closed.Finished table is surprisingly strong and stable, especially considering the forces one can bring to bear on the outer edge of the table.Be aware that your finished project is only as stable as the materials you use and the attachment points you establish. I "overbuilt" for this purpose, and am pleased that the hardware is rock solid. Highly recommended.

I needed to make a murphy desk, and this bracket was perfect for it. The included screws are very brittle, and I had two of them break in the stud while screwing it in. Make sure you drill good pilot holes the length of the screw (2.25") or use your own fasteners. The screws come with drywall anchors which I would only use if you are using it for something like a shelf. It claims a rated load of 500lbs but I'd be hesitant with anything over 150lbs at the end of the brackets. I purchased the 16" length brackets, the further out the load, the greater the torque on the brackets, the less I would trust the carrying capacity.I recommend these brackets, especially for desks and shelves.

Bought these to add an addition onto a little desk that I'd like to be able to "shrink" down to original size when I don't need the extra space. These were perfect! Super sturdy and sleek. I'd definitely recommend them!

EXACTLY DELIVERED AS DESCRIBED! USED SAME DAY!

I have a shelf that very occasionally needs to be removed to access a utility closet that is in the laundry room. Probably once or twice a year. These brackets make it possible to remove the shelf and fold the brackets out of the way. Perfect for this use. Very well made and high quality. Easy to install too.

The media could not be loaded. I used 2 sets of these brackets for my work bench. It is a 4'x4' with 2, 2' x 4' extensions on each end. I bought them because they say it holds up to 500 lbs. Not even close. I push down on the extensions just a little bit and it bent it. If I were to sit on the extension it would probably break. So now I'm going need to put a leg on each corner for support.

Easy to install and very sturdy. I had a small addition that I need to add some counter space on a cart by the BBQ. Screwed them to the wooden legs and a nice cedar 2X12 5 ft long looks great. I like the feature of the little lever underneath that locks it in place. All stainless steel.

Estos soportes son buenos, de buen material. Al instalarlos tienen su truco porque pueden quedarte descuadrados y no cerrarán hacia abajo. Lo que yo hice fue fijarlos a la pared (nivelados), poner el tornillo mas proximo a la pared, bajar (con cuidado) la mesa, alinear los soportes móviles, marcar, levantar la mesa y completar los tornillos adicionales. Si no te queda alineado, al bajar la mesa se atorará.

Not too much to say about this item - I didn't use it to make a shelf and sit on it, or anything, but I have no garage and only a wee little storage room so I mounted this as a space-saver to hang my extension cord from. The "folding" function seems to work very well so if I needed to fold it out of the way for any reason it would be easy to do so. Two screw holes. Doesn't get much simpler!

These worked great for me! Exactly as described. The only issue I had was that only 1 side could be screwed into a stud because the spacing was too close together. The other side did pull out of the wall with heavy use so I had to adjust it.

Supports look sturdy so far (used for a folding bench in our house entrance). Screws and the rest of the hardware that come with the supports are a joke though, being SO cheap, that they broke in two while installation (not just one, but all of them). You will need to get real screw from the hardware store for these.

I purchased a laundry sink in a cabinet but needed a flip up shelf at one end to set things on. I bought the 14” bracket set. The shelf is 20” out 14” works fine. Predrilled holes, it works great. Would diffinately purchase this brand again.