1" Brass DN25 Fan Shaped Fountain Nozzle Flat Duck-Bill Fountain Head Sprinkler Spray Head for Garden Pond, Amusement Park, Museum, Library

I had been looking for something better than the makeshift hose end that delivered water over the rocks and back down into a 200 gallon water feature. We replaced the aging 1inch kink-free tubing, and needed to figure out how to use the fan portion of the nozzle we had unscrewed from the base. A very helpful man at the hardware store recognized that the nozzle had pipe threads and not hose friendly threads, and found a 1 inch adapter that was barbed and could be secured to the new tubing with a hose clamp. We were then able to secure the fan nozzle to the adapter(using some teflon tape on the threads). We are using the 960 Laguna pond pump and have experimented until we got the right position for an attractive water flow. Picture is included.

Tapers down to 3/4". It's good quality. There's no gaskets to prevent leaking so use pipe dope or thread tape

Fountain PVC pipe is 1 inch, thread on the fitting is 1 inch. Had to sand down the outer end of tge pipe to get it to screw onto the PVC. Worked great, screwed it on, no leaks, great addition to any fountain!

The spray is close enough to the photo but there is no gasket in the ball joint area. I couldn’t tighten enough to completely stop the leak.

If your installation requires the the nozzle to not leak, this is not your product.

Well made, great material, solid Brass construction. It screwed on to a 1" threaded coupler. Plug and play!

nice heavy piece. Using at end of hose to return water into pond padt the filter. Sturdy