SUPERNIGHT LED Strip Lights Waterproof, RGB Color Changing 16.4ft 300LEDs

I've updated my review after the company contacted me to correct the order (I received the correct product this time). I've used both the Blue and the RGB LED strips from this company. Both are decently solid options, especially for the price. I've purchased a ton of LED strips from different companies, but I decided to try supernight out because they were the cheapest option. The quality of the RGB LEDs are near perfect, and honestly quite impressive for about $10. The solid Blue LED strip I received had a few soldered joints that lowered the quality, but is still a great deal for the price. Overall, these LEDs are a great option for the price and will get the job done. A lot of the negative reviews sound like they are reviewing a $100 product, which you need to remember is not the case with this. I am very pleased with the customer service, they contacted me to make sure I was satisfied and offered to replace my order for free. If you happen to receive the wrong shipment or a defected product, just send them an email. They are very responsive and fair. Some things to note: - These LEDs are water resistant, but they are certainly not water proof. - These do not come with any kind of power source, you need to provide a 12 V source with ample current limiting circuitry. - This is a $10 product, you get what you pay for

Update: seller contacted me and offered free replacement which I obliged. Thank you so much guys, the lights really are fantastic and bright. Outstanding customer service, review reflects product and customer service. Color: 10 Brightness: 10 Adhesive: placement could be better-recommend not placing it on conductive surfaces As the title says: do not stick them to metal. The adhesive strip was not centered perfectly and the copper contacts that you cut across to shorten or lengthen the strips will definitely touch the metal. Not on the ends, right in the middle of the strip. Aside from that, the lights work fantastic and are super bright. I will definitely buy again but i will never put them on a conductive surface again. Attached is a picture of them glowing at night compared to my LED headlights. They're definitely bright!

They work well if you don't move them around at all. Over time they get really brittle and they on the back of my desk so when i move my desk the connections start to get really week on them. I've had to cut off and reconnect multiple areas on the strip. As long as they are stationary and never moved and all they are perfect though lol Bright lights easy to set up. Have to have direct angle to the receiver or the controller work worker though so make sure to put the receiver out from any hidden areas or you will have to reach around behind and point it right at it.

TLDR; Works perfectly. Unroll before use/testing, else they can overheat. The reel came with a male four-wire plug on one end, and a female four-wire plug at the far end. I tested using a bench power supply, which also showed full-on white drawing just under 3A. Single-colors were consistent throughout the strip. When I first opened it, the strip had a slight smell, similar to new foam mattress, which I expect dissipates after a few days. As expected, the strip can be cut at every third light (I'll call this one "unit" == 3 LEDs). For reviewers who think this is "soldered together" scraps.... It's more likely that these are manufactured with ten units (30 LEDs, nine internal cut points) per sub-strip. Each reel is then made up of sub-strips that are soldered together. (so, 10x sub-strips, each with 30 LEDs, for this reel). That makes nine locations with pre-soldered joints in the reel. The same is true for the RGB version I bought from SUPERNIGHT. VERY PLEASED.

These work well for the price. However you do need some items in order for it to work. Dummy me thought I could just plug these into the 12v RGB connector on my PC motherboard and have them work as an RGB strip with Aura Sync. My plan was to do that and then have them wrap around the back of my desk for accent lighting controlled by my PC RGB programs. Not possible. THESE DON'T WORK THAT WAY! You need a 24V power source and an IR Remote system. As long as you buy those too, these will work great. Really bright with lots of colors. I repeat... you need a 24v power source! Not 12v! Some power sources on here are sold as working for led strips at 12v but not this strip! This strip needs 24v! These will not be good for outdoor use or sticking under your ricer car for underglow. The stickiness is really good and if you cut them in the correct spot and but the necessary connectors, you can get a lot of use out of them as this is a really long spool of lights.

Decent LEDs, with a fairly bright output, but not really any different from any of the other SMD5050 strips out there... ...EXCEPT when it comes to quality control. These have a glued back, with paper tape to cover the glue until you are ready to use them. Mine had endured some kind of manufacturing issue which meant that the glue was globby and not flat, and the paper was rumpled and twisted which made it difficult to get the strip to sit flat before I was ready to glue it in place. I had to manually cut the globs out of the glue layer which cost me a bunch of extra time and was REALLY annoying. I would recommend going with another product with better quality control - I have used LEDENET's strips, amplifiers and controllers and have yet to have a problem with any of them.

No era lo que quería

Before, I had a previous set of SuperNight led strips that unfortunately stopped working after I attempted to make a clean cut down the middle indicator, carefully..but not careful enough the scissors ended up sliding and well...goodbye 600 led strip and $40 including the extra adapter, lights down the drain. Learned a lesson and just enough I could handle at 300 led. It was a battle finding the right strip as a previous order of TaoTronics ended up having ultra violet tones in every color switch as well pink, yellow/orange tones and there was water coming out as I unraveled them. I missed my SuperNight strip, so I bought another one! What I love about these led lights is the smooth transition that is hard for me to find in other lights. It fades nicely and the color shows up accurately on camera or when people walk into my room without seeing the led strip. I recommend these if you are looking for something cheap, but decent quality. I leave my lights on for no more than 45min to and hour, let rest for an hour or two before using again. The leds get very hot if you leave them on for a while and it could be a hazard..as of anything, be careful.

glue was terrible. need to add decent mounting clips

This is only a strip. Not usable by itself.