Lux Pro PSD011B Digital Non-Programmable Thermostat for Home, 1 Heat, 1 Cool

I purchase this for someone that needed to replace a old mercury thermostat for a wall furnace. Installation took about 5 min. Install the batteries, connect the low voltage wires, install on the wall, set the desired temperature then turn it on.I would recommend getting a plate to cover any holes greater than 1 inch diameter to ensure the indoor temperature is accurate.As with any electrical including low voltage It is recommended to turn off the power at the box before working on anything electric.

This thermostat replaced the one in our camper that was either on or off. This one cycles and kept the camper perfectly heated. We didn't have to get up and down at night turning it on and off. My husband said it was easy enough to install and we think it was well worth the money and effort.

Works as stated, ease of use big numbers.

Used in my camper, easy setup

I installed this thermostat to control the room temperature and so far it has worked great. My Heat & Glow model SL-750TR-IPI-E gas log fireplace has worked great for years but I had to get up and turn the logs on or off if the room was too hot or cold. I already had installed a blower kit several years ago that would automatically turn the blower on after the fireplace got hot and off when the fireplace cooled down (that is not part of this thermostat kit). This is a simple install, you simply connect two wires on the back of the thermostat that were connected to the old wall switch. My gas log set has auto ignition so when the thermostat calls for heat the logs light and after few minutes the blower comes on. When the set point is reached on the thermostat the flames go out the blower runs until the fireplace cools off.

I have a separate Atwood Propane Heater and a Separate Coleman Roof Top AC that has it's Controls & thermostat mounted directly on it. This is for controlling the Atwood Propane Heater only! If you have a combination HEAT/AC Thermostat that controls both in your RV look for something else, if you need a heat only model, like I did, get this one!Installed in a 2001 R-Vision Trail-Lite Trailer to replace my old analog spring based thermostat that was controlling the Atwood propane heater only.The installation was super easy, only two wires; Red & White hookup. The only tool you need is a #1 Phillips Screwdriver, maybe a wire striper if the wires aren't already bare on the ends. Two screws to mount the base, two screw based terminals to put the wire in. Place the wire between the plastic guard and copper then tighten the screw. I mounted on RV paneling so no drill was need for pilot holes, it didn't match the old mounting holes but it was a little bigger than the old one so it hid the them nicely.I wanted this specific one because I don't have a fan only mode because RV propane heat only systems are either on or off heat so I didn't want the switch for the fan (on-auto). There is still a dummy switch on this one, but it's not labeled on the front and it's position doesn't affect anything, nor can it confuse anyone else who is operating this device in my RV. Two AA batteries keep this going, I will just keep a "spare" set in my RV in case they go dead, so I won't be left in the cold; instructions say replace yearly, but I have a funny feeling since it will just be used when I'm using the RV they will last quite a bit longer. I set the temp limit to 78, which would be cooking in a RV! But you can set it to whatever you want, I just didn't want some kid to bump up my temp to 90 because they think the more they press the up button the faster it will heat up.Operation is SUPER simple, one switch for On/Off and a UP/DOWN switch to set your temperature. It lights up nicely when you press the buttons so you can see it. It then displays the current temperature.I haven't really tried it yet, just tested it out in the driveway, first camp trip is Memorial day 2014 coming up which I will use this for 5 days. Looking forward to trying it out. I will update if there are any problems or if it runs great.

We bought this for our Airbnb in hopes that it would be simple and easy for our guests to use. Mission accomplished.

Wish I would have had this years ago. Works perfectly

It works great and easy to install. Finally solved a problem we had with our fireplace regulating temperature properly. It has been a god send.

Great thermostat for my campervan. I had order another one by Honeywell but it turn out to be far inferior than this one.The buttons on this unit are proper size. Screen is large and easy to read. Connecting it was a breeze only 2 wires for my purpose. I installed it for my Hydroflame furnace. Came with 2 Energizer batteries. I had the original thermostat which was 30 years old and super inaccurate.

Installed this in my really old motorhome. Works perfect for switching 12vdc propane furnace on and off. Good temp control. Switched #2 to celsius. Easy to enter temp limit. All set. Only 4 stars because it was a day late with amazon prime.

used to replace our old propane fireplace thermostat and this works great!

Installed this thermostat on my RV propane forced air furnace and it work like a charm. It’s really easy to install, to use and wayyyyyyy more precise than the old mechanical thermostat.