Livelynine Brushed Nickel Peel and Stick Wallpaper Silver Stainless Steel Contact Paper for Appliances Dishwasher Fridge Refrigerator Wrap Cover Adhesive Decorative Vinyl Film 15.8x78.8 in

Taping la.parte negra de mi refrigerator con esta producto y quedo bien.

This is a fantastic product!!! I used it to cover a rust spot on the door of my refrigerator. Works great. Replacement of the part would cost about $500. It seems to be water proof and if over time it is not it is easy to replace. Easy to cut and the adhesive works well. I followed a suggestion to use a hair dryer first to increase adhesion. Probably many applications like duct tape or wd 40.

This paper was easy to work with IF you know what you're doing. It does scratch easily, so I notified the seller. They quickly refunded my money and I re-bought the paper to re-do the scratched areas. I am also going to put down an couple layers of paste wax to shield it from scratching so easily. My counters were ugly, Ikea discontinued brown granite-look laminate I just love the look of the stainless counter top. As for application, you need some tools and a lot of patience. TOOLS; windex, soft cloth, window squeegee, exacto razor knife, blow dryer, smooth/rounded edge burninshing tool such as a credit card with the edge sanded so it won't scratch the finish. Thoroughly clean and rinse the surface. No dust, hair, grime. Spray lightly with windex leaving your starting spot dry so the paper won't slide as easily. Place your paper by slowly peeling back just a few inches of backing at a time. Don't worry too much about bubbles at this point. After your area is covered, lightly spray the surface with windex or water so that the squeegee slides easily. Squeegee the bubbles out and DO NOT ATTEMPT TO SEAL THE EDGES WHILE PAPER IS WET. If you have a difficult bubble, blow the surface with a warm blow dryer. Use your soft cloth to catch the drips and wipe down the surface. Continue this until all surface is covered leaving ample overhang for your edges to be finished and tucked. Using the windex method, you will be able to butt the factory straight edges right together with a tiny hair of overlap. Remember to go slow and spray and squeegee along the way. After you have the top surface complete, lightly spray the top and squeegee down one more time. Then wait until it dries completely before doing the edges. I waited overnight. When completely dry, choose a center-point to fold over. You'll need your blow-dryer to get the best edge. Blow warm air along a few inches of the paper and edge to heat it up and work the paper over the edge corner with your thumbs. You may want to use your credit card tool to help smooth out bubbles. Go slow. When you get to the end point where it needs to be wrapped, decide which way you want the visible edge to go. You'll need to make a cut so one piece goes around the corner and the other goes over the top of that. Good luck, go slow, and you won't be disappointed.

great value, high durability and function, multiple applications can be used for

When applying this contact paper be very careful to not let the paper touch on the sticky side or there will be a crease that you cannot smooth out.

I purchased this for my stove hood. It was black while all my other appliances were stainless. I rent so I did not want to purchase a new hood. I sanded and cleaned the hood. I rolled the paper out and applied it. The next morning when I came in the kitchen it had popped loose from the front of the hood and where it rolled over the front. I guess it id only made for flat surfaces. Wont buy again

I’ve never been handy with contact paper, but this stuff is amazing! The drawer beneath my oven door was all banged up from my wheelchair, so I wasn’t optimistic about how it would look, but it looks fantastic!You can see it’s a bit lighter than my stove, which is brushed stainless, but it still looks great because it matches the handles.

I bought 2 rolls of this paper for a kitchen project and installed a portion of it to my stovetop overhead fan. I gave it a great look over and it's a super polished stainless steel, you couldn't come to the house and tell me it wasn't stainless steel. Also, it's not the dull or more matte type of stainless you'd think you'd get, it's a really nice buffed and polished look. For installation go very slow and have preferably a device specially for getting bubbles out and make sure to measure exactly what you need it doesn't hurt. This is definitely a 2 person job as the paper isn't very stretchy or pliable and you'd need a hand for intricate jobs. You definitely don't need a spray adhesive as I found this contact paper is freaking sticky strong especially on a stovetop which is awesome. I just reccomend you not put this on walls as it will tear the paint clean off when you go to remove it. I did not complete my project and took down the paper only because its shine paired with my intensely lit kitchen, on top of the range didn't work. I returned a roll I didn't use and kept the first role and have found a better place for the paper in my kitchen. I'll be jazzing up my toaster and coffeemaker, luckily this paper is so versatile in this stainless steel color. 5 stars even though I didn't use it for what I intended initially because it has such a brilliant shine and I have to find something else. This product is really nice and I will be using it for smaller projects in my personal kitchen.