U Brands Glass Whiteboard 36" x 48", Frameless White Frosted Dry Erase Board, Wall Mounted for Office, Home, and Classroom, Includes Marker

U Brands Glass Dry Erase Board, 24" x 36", White Frosted Surface With Silver Grommets, Frameless, Includes Marker With Eraser ($32.00) This is a nice modern looking glass dry erase board. This replaced one we had up in our dining area. It served as a place for the kids to draw, for school stuffs (like working through math problems), and tallying points for board or card games. The old one, the surface started to wear and would no longer get completely clean so it just always appeared dirty. It was already over 10 years old, so I looked into acquiring an upgrade. This has been a great upgrade! Only thing is I wish the tray was longer, like the full length of the board. We like using different color dry erase markers. The marker it does come with is great and has an eraser built in in its cap. This is NOT magnetic. My old one wasn’t either so this did not bother me. I am unable to comment on how easy or challenging the installation was as I did not install it.

I really like it. Much better than the melamine surface boards. It is more of a pain to install, but only took me maybe 1/2 hour. It is a little heavy and awkward, so 2 people are better, but not required if you can hold the weight for a few minutes. The pics are with some glass pens, the box came with a black one, and then I bought some fine tips from Quartet. How I installed: - The holes are 32" in apart on the 23 x 35, so since studs in many homes are 16" apart I just used some wood screws. The screws it came with might have worked as well. - I figured out the spot where I wanted the top left screw, and installed the little back mount there. You screw 4 of these small back mounts to the wall. - I held the board w/ 1 hand in the middle bottom, and loosely attached it the mount. - I then got it level using a small level, a little tricky, and used a pencil to mark where the other top back mount would go. - I detached the board, and then screwed in the other top mount. - I verified the new hole was level using a longer level, and that the centers were exactly 32" apart. - after attaching the 2nd top back mount, I put the board up. - I then put the bottom back mounts on with the board on the wall. The holes are pretty exact, so not much wiggle room. One of my bottom mounts was off by a very small amount, but by backing my screw out a 1/4 turn, I was able to get it aligned. It was a slight pain, but measure twice, as they say, and it should come out good.

I work from home and part of my work is presenting design solutions over the web. Sometimes, that work is presenting live whiteboard solutions. Most whiteboards are horrible, flimsy and ugly. They also have a reflectivity that results in glare on camera, which you just don’t expect and wind up having to compensate for with lighting and umbrellas. So, a glass board with the right lighting can surprise you. First, they’re reasonably light. I don’t recommend doing a one-person installation. That’s what I did and wound up with a 2 degree offset on the installation which annoys me and I’ll wind up fixing it. Go two-person, use a carpenter’s level and be happy. On camera, this has a great soft look. Make sure to use markers designed for a glass whiteboard and not a regular whiteboard or you’ll work a bit harder to keep it clean. Microfiber cloths clean this really well. Green markers don’t show up as well on camera. The mount system is actually very good. What you’ll likely find useful is to make a template on paper. What I mean by that is to lay out a grid of copy paper on a table and tape them all together. Lay the board on top and ensure the top is level to the top of the paper and draw the entire top edge so you have the line for the level. Then, using a marker tap into the four holes where the mount posts go. Take this sheet and put it up on the wall you’re going to install it. Ensure (several times, please) the line you drew is completely level at both ends. You’ll need a drill to install this, a power driver will help, too. Drill one hole at a time and verify the position each time with the white board. The kit is very good quality. As long as you successfully drill either two holes that are equally across the top or on the diagonal, you’ll install this correctly.

This is a beautiful glass whiteboard, and incredibly fun to write on. Now that it's installed I'm so so happy with it! There were a few things that were a bit difficult. 1) This is glass so it's very heavy. I had to install this myself, but to get the holes in the right spots I had to hold this up on one knee, while standing on a chair, and attempt to use a pencil to plan out where to drill the holes. Would be way easier with two people, but still , I managed to install it by myself. 2) The drywall screws it came with are pretty cheap. Luckily I figured that out after the first one, because the whole thing would have ripped right out of the wall. I used the exact drill it size that was recommended in the instructions but it was not secure at all. I switched over to high quality ones that are more if a spiral shape and the other 3 brackets were on super secure. I would recommend that the company upgrades these - for buyers - definitely upgrade these (my two cents). Ultimately I'm so happy with it. I would definitely purchase this again but get someone to help me and go with better drywall screws from the start. But I'm 5'5 and 130 pounds and I managed to get this up without damaging it so hopefully that's reassuring for anyone worried about trying this alone!

I love the board but I need replacement wall Anchors and I don’t know how to get product support

Looks nice in my home office and was easy to install. The glass whiteboard is such an upgrade from a white one. I didn’t have any studs in my wall so had to use mollies and it’s been holding up fine for 6 months now no issues. The marker ink shows up clearly in the glass and erases easily. I like to use windex to clean it as well

Overall I really like this board an it looks much nicer than a standard white board. The install was pretty easy, but the included wall anchors are crap. I was able to put two of the fasteners into a stud so I only needed two wall anchors. The ones it comes with are terrible so I ended up going to the hardware store to buy two toggle bolts for a total of $1.50. Make sure you bring one of the mounts with you to ensure you get toggle bolts with screw heads small enough to fit inside the mount. Once I had those, install was smooth sailing. I thought it was missing some of the rubber gaskets that go on either side of the glass but they are actually two thin gaskets stuck together that you have to pull apart. Even with the poor wall anchor quality I gave it 5 stars as it's an easy fix and the value is still excellent at the price I paid ($44.50).

Great board, works well. My husband loves it and we use it all the time.

Ich mag das Glassboard sehr. Das Design ist sehr angenehm, der mitgelieferte Stift ist super für das Board! Der Versand hat gut geklappt. Sehr empfehlenswert!

Good product, but hard to assemble. Two of the holes didn't have pass through the glass easily which required turning the bolt very carefully to avoid cracking. One part did crack slightly. The female part behind the glass doesn't allow much in flexibility so if one hole is not perfectly aligned it's quite painful to get it right. In our case, the wall is brick and the hole wasn't straight which meant I had to put a rubber washer to squeeze in the bolt crooked and still hold the board correctly.

Installed this white board in my workshop, not sure why I ever purchased cheap whiteboards that stained after a short time. Excellent surface with no mirroring after ink has been on for weeks. I would definately recommend this product if you are looking for a white board that will last for years. Crisp, clean, frameless look with pen tray is much more modern looking than a wood frame.

Does the job but the metal holder that came with it was dented so we ended up ditching it. The board is easy to clean and the marker is good. You have to be very precise to set it up the wall so that all 4 screws are in place properly. Not much margin for error.

Finally received in good order. Thank you.