Zulkit Junction Box ABS Plastic Dustproof Waterproof IP65 Electrical Boxes Hinged Shell Outdoor Universal Project Enclosure Clear Cover with 2 Cable Glands 8.7 x 6.7 x 4.3 inch (220x170x110 mm)

The item is very well made, the seal is very tight. I use it to keep my outdoor remote controls safe and it’s just perfect for that.

Wow, you can even mount this upside down like we did under the eaves. We placed the LED strip light box in it and it stays perfectly dry. The size is roomy enough so we didn't have to squeeze the wires in.

I put a 4 zone not waterproof irrigation timer in this so it could be outside. It was that, or splice the wires so it could be inside my garage. This was easiest. Works great.

The box is super thick, drilling the holes for the wires was easy. The plastic is soft and didn't crack. The wire bungs keep it waterproof and they screwed on nice and easy. Definitely a good item especially for how cheap it is.

Box is very robust. Lens is clear and has not faded or become opaque in 2 years of extreme exposure. It seems to seal really well but the clasps sometimes feels like it does not close all the way but it actually does. I use it for a garage remote control housing. I only wished they made a taller one without getting wider or deeper. Absolutely fixed my corroding remote.

I haven't had the box long enough to say anything about the weatherproof or Water resistance yet but will update this review after it gets above 40 degrees here in Texas and I actually get it mounted.So far, the box has been easy to work with and the construction is very good. The latches close down nice on the box and the clear lid makes it easy to see the displays on the electronics I have in there. There are 2 things that knocked it down a couple of stars for me though. There are no knockouts for the included cable bulkheads, and they are not really waterproof or even water resistant. They have no way of tightening up around any size of cable that you would put in them. That to me knocks it down a star. I am planning on using silicon sealant to plug these up. I might recommend it depending on the persons skill level and their project (in or out of the weather)

Nice, clear plastic box that I attached to our gate entry with a "push button buzzer" inside, so when deliveries are made, the driver can open the box and push the button so I know to go and pick up a package. We can't see the entry gate for deliveries from our house, so don't want items left outside or overnight. Easy to put holes in the bottom and wire the box to the gate.

The enclosure is a nice size and watertight. However, there are a few drawbacks. There are no pre-punched knockouts, so you'll need to drill your own holes, which is an inconvenient. I used a 3/4” bit, but the rubber plugs provided are too big and don’t fit as they should. This required some extra effort to get things right.