Chemical Guys VSS Scratch & Swirl Remover - 16oz

This review is also coupled with the other products I used as they all helped to get to my final finish. Products used in my setup: Chemical Guys VSS Chemical Guys White Light CarPro Cquartz UK 3.0 Torq X Polisher with Orange Pad for Cutting and Blue Pad for spreading the White Light. Meguires Claybar 200g Griots Garage Iron Remover Mothers Magnesium Polish Used Provided Microfiber clothes from Polisher (from chemical Guys) Now I did not take a picture at each step in the process as the end result is what truly matters and it saves 30 photos being uploaded here. I did inspect the paint at every single new stage and can report for each step. I will do my best to be descriptive with my findings to help all those who come after me. This work is done on a 2016 Summit White Camaro with 34,000mi on it and I got the car at 21,000mi from previous owner. I have about 3/4 years experience detailing but that is not needed to get amazing results, just time spent on the work itself. The first owner did leave scratches and swirls from improper washing but this was all on the surface. My process took my 9 hours not stop start to finish including all curing times and standard waiting period. This work was done on a vehicle stored in a garage overnight at a constant 65 degrees thanks to three heaters. 1. I have the vehicle a wash with My standard soap setup and I don’t believe this had any effect on the end result as it was a simple car shampoo with zero additives but it was ph neutral. I wash my car weekly even up in Chicago winters so I don’t need a strong soap. 2. I proceeded to use the iron remover on all surfaces of the vehicle with little agitation after the dwell time and proceeded to wash off with a spray bottle of water and a microfiber towel. 3. After drying the vehicle I then claybarred the entire vehicle on every painted surface and used regular water as lubricant to avoid introducing extra oils or substances to my finish. After this step the paint was incredibly smooth and contaminant free as I spent pain staking time going over each body panel to make sure every single spot was touched and fixed up. It took awhile but it is all in the prep work when polishing and then ceramic coating as that final layer locks in all your work, and imperfections if you’re not careful. 4. I then took some rubbing alcohol and lightly went over the entire vehicle to ensure a sterile surface and I didn’t feel the paint at this step as I did previously and this was entirely about keeping it contaminant free. 5. I then took out my polisher and VSS and began taking off my scratches and swirls. There are tons of videos on YouTube from chemical Guys to teach you how to properly do this so I will skip the lesson, I did use the Orange Hexlogic cutting pad. After working in small areas and taking my time very slowly I worked panel by panel and I was happy with the little fatigue I experienced from using the machine. At the very end of the day it didn’t feel like I used the polisher for the 5 hours that I did total, very impressed. I bugged off the Polish per the instructions and wait time and was left with an incredibly glass like surface that eliminated all of the imperfections of the paint. This took the longest off all steps and was close to how long my clay service was but I wanted to leave no swirl behind and I spent very long. (A desk chair with wheels or anything to sit that rolls makes your life thousands of times easier than standing for so long) 6. I followed Up the Polish with the WhiteLight and using the polisher to spread the glaze was incredibly easy and a little goes a long way. You use way less than if you did it by hand and it spreads very thin and I used speed setting two for this with no pressure but the weight of the machine to apply. After this step was complete I checked the finish and it was like a mirror, cool to the touch and silent when touching with the back of my hand. I was very impressed and I went into this thinking there was a placebo effect that it’s for white cars it’ll make it pop but I’ll only think so after pouring hours into it and wanting to see a difference. I got two outside opinions from the start of the day to this step and they noticed a massive difference and compared this to a car on a museum showroom it was perfect. 7. I then followed up this process with applying my ceramic coating and this was a very easy process with incredibly fast flash time and the spreading was incredibly easy and a little went a very very very long way. I barely used a quarter of the vile and it always had an even coat that I checked constantly under light to make sure I wasn’t running it too thin. I have a plastidipped black roof and rear section of the vehicle and I tested a small spot first and when there wasn’t a reaction I also coated the plastidip as the box said it’s ph neutral and safe on nearly anything. After applying I noticed the plastidip had a slick feel and was very glossy (I had 3/4 coats of gloss on mine as I wanted the gloss level to match the OEM white) and I was very impressed. The pictures provided are after I finished the entire day with my vehicle, although this was the last step the paint saw. 8. My last steps were using mothers metal polish for my exhaust tips and what an incredible difference it made. I later cleaned my windows and interior and followed up with my engine bay and then my tires. Finished the day with Meguirs Tire Gel and then let the vehicle sit before I drove it for as long as I could that the time of day would allow for. Overall the combination of the products worked incredibly well and each one used for the paint would be amazing by itself and in combination with your other favorite products, I just gave my list of products used to help others as I love reading in depth reviews for these important topics and the amount of products out there. My pictures provided aren’t of the highest quality as I can’t take quality photos and it was a long day and I was just happy to drive my car after. I would entirely recommend the products and the others mentioned and the biggest thing is the prep it takes to get the paint entirely clean and then having the time in the day to devote to this job. I haven’t tested the ceramic capabilities as it has to allow 24 hours before contacting water at all and then it still cures over the next 5 or so days, but it feels and looks amazing. I recommend 100% and I am in love with the look and feel of my vehicle.

Very happy with and grateful for this product. I had minor faint scratches suddenly on my Tesla bumper and it all came off very easily with just a rag. One scratch was a little deeper and you could feel the roughness but it all went away.

I have a Jeep Wrangler with a lot of scratches from riding on dirt roads and branches hitting it. The scratches are light with a couple of deep ones. This stuff surpassed my expectations! Seemed to have taken care of all the light scratches, and the few deep ones minimized its appearance. I didn't have to use a lot, just a few drops at a time like the directions say. Chemical Guys, get some Jeep peeps to sponsor!

This product works best with a DA polisher, not by hand. It also works best on black paint. On gray, it's not as polished looking. You have to spend time to get the scratches removed, that's because (no one seemed to point this out) the solution starts of coarse, then as you polish car more, the granules break down to aid in polishing the car. So once again, coarse to remove scratches, breaks down, to polish. Don't rush the work. It should end up being a dry haze to know that the solution has broken down. You won't regret results. Not sure what those other reviewers did, but you should not get more scratches on your car. Perhaps they were too impatient. You have to wait until the solution breaks down.

⭐⭐⭐⭐⭐ So, I recently bought the Chemical Guys COM_129_16 VSS One-Step Scratch and Swirl Remover Compound Polish from Amazon, and let me tell you, it’s like having a magic wand for your truck’s paint job. It’s so effective that I’m now convinced it’s secretly a wizard in a bottle. When the package arrived, it was like receiving a gift from the gods of car care. The label alone was so impressive, it felt like I was about to unleash a potion that would turn my truck into a showroom marvel. As I unscrewed the cap, I braced myself for the transformative journey that lay ahead. Applying this stuff was a bit like performing an ancient ritual. I carefully dabbed it onto the affected areas of my truck, feeling like a knight polishing his armor before a grand quest. The paste itself has a consistency that reminded me of smooth, luxurious frosting—minus the calories and with way more car care prowess. As I started buffing away, I half-expected my truck to start glowing like it was on a mission to outshine the sun. Instead, the scratches and swirls began disappearing faster than my excuses for not washing the truck. The effect was almost immediate. My once-scratched-up beast now looked like it had just rolled out of a spa day, with a shine that screamed, “I’m too fabulous for parking lots.” The best part? I didn’t need a degree in auto detailing to use it. Just a bit of elbow grease and a microfiber cloth, and voilà—my truck’s finish was smoother than a fresh jar of peanut butter. The scratches that once mocked me with their existence were now nothing but a distant memory. If only my truck’s dirt were as easy to remove! After the treatment, I drove around feeling like I was in an action movie montage where the hero’s vehicle is being transformed for the ultimate showdown. People looked at my truck with a mix of admiration and envy—probably because they could see their reflection in the paint. I’ve even started receiving compliments from neighbors who now think I’ve got a secret detailing team on speed dial. In conclusion, if you’re in need of a product that can make your truck look like it’s just had a red-carpet makeover, Chemical Guys VSS is your answer. It’s like a fairy godmother for your vehicle, turning it from "meh" to "marvelous" with minimal effort. Just be prepared for the inevitable influx of compliments and the sudden urge to drive around flaunting your truck’s new shine.

I tried the Chemical Guys Scratch and Swirl Remover on my car and I’m honestly impressed with the results. It combines polishing and light correction in one step, and it really helps reduce light scratches, swirl marks, and wash marks without making the process complicated. The best part is that you don’t need multiple products or advanced techniques, just apply it with a cloth or a polisher and it leaves a deep, glossy finish. The paint looks smoother and has a much better shine than before. If you want to restore your car’s appearance without spending a lot at a shop, this product is definitely worth it.

Didn't hide the scratches, still visible after multiple applications. Like others I've tried, I still haven't found a product that works

Worked good. Got swirls out that I put on it with compound. Nothing else worked. They make good products

Never lets down or miss a beat always makes car shine like new

Best product to remove swirl marka from vehicle.

Its chemical guys … promises delivered

I’ve used this on several cars and it really helps reduce light scratches and swirl marks. Works best with a dual-action polisher, but even by hand it noticeably improves the shine. The paint feels smooth afterward and looks freshly detailed. Great product to have in any detailing setup.

I had some scuff marks from trying to get off some bird poop and I also had a minor scratch. It's a new car and did not want to start it's life with these little blemishes on it. I have used chemical guys products before with great results so I thought I'd try their VSS as well. This product delivered as promised. Scuffs are gone and so is the scratch! Easy to apply and take off. The only thing is you must use slllloooowww passes when using the product. I'm sure I would've received better results if I didn't try to race thru the job. Great product!