# WM105: 3/4" x 3/4" Flexible Quarter Round Molding - 8' feet Long - Made in The USA

If you are considering any other flex trim, stop and just buy this one. The texture looks just like wood, easy to paint and has high flexibility.

Coil came bent for an outside corner, so I placed it in a sunny location with weights to bend it for an inside radius, a fairly tight one! It took a few days but it did relax enough to paint and install. Easy to cut (miter box and hand saw), easy to patch at old-house corners (paintable caulking), and easy to paint. I pre-painted, installed with contact adhesion caulk, and set gallon jugs with water in them to hold it in place (set on top and also backed into it to hold it in that inside corner). Looks great and has stayed painted, too! (Sherwin-Williams Cashmere wall paint, satin equivalent, Jade Dragon color.) -- Albert's wife, Megan

I’ve ordered and sent back several flexible molding options trying to find the right one for our airstream remodel project. This has been the best so far! Quality feels much better, and looks higher end compared to the ones that are made out of silicon. Can’t recommend enough!

Needed a solution for a curved bottom stair landing, this is it.If you’re an average DIYer, you’ll probably want a helper to hold the trim piece against the curved edge you’re installing it on. Cut with a mitre saw. I heated the piece with a hair dryer and bent it to fit the curve. I used a couple of 18ga brads installed with an air nailer (because that’s what I had on hand) but first applied a generous amount of Gorilla Glue all purpose adhesive. My helper held the piece in place until I could get it tacked into place.It will probably be a lot easier to install if you’re a decent DIYer.Even with my average skill, once in place I was able to caulk the seam and paint it to match the stair trim. It’s worth the money and effort.It really does add a nice finishing touch, especially if you’ve installed a thin floor like LVP.

Great product.Highly satisfied.Definitely recommend.

We removed the carpet on our stairs and painted them. Needed someway to trim out the bottom where the step curves around the newell post. Did a lot of searching online and finally found a reference to this flexible quarter round. It was cool weather when it arrived so it felt rather stiff. Before installing it I put it out in the sun on a 85F day. It softened up nicely and was very flexible. I glued the back and used 18ga nails to attach it. Trimming to fit was fairly easy with a utility knife. Haven't painted it yet so don't know how well it will hold paint.

I have to say this stuff worked better than I thought it would. The radius of my corners are a bit tighter than advertised on the product but I figured I'd give it a shot. I had to work with it a bit. I used a hair dryer to make it a bit more pliable. I nailed it as I bent it around the corners and I used wood glue behind it to help with the hold. Took these pictures a week later. It should look great when I get all the trim painted. While I'll never do rounded corners again, I would totally recommend this product.

Okay but glue strange