Mounting Dream TV Mount Fixed for Most 26-60 Inch LED, LCD and Plasma TVs, TV Wall Mount TVs Bracket up to VESA 400x400mm and 100 LBS Loading Capacity, Low Profile and Space Saving Flat Mount MD2361-K

sed this Mounting Dream wall mount to hang a TV in my garage, and it worked great. The mount feels really solid and held my 55” TV with no problem. It sits nice and close to the wall, which gives it a clean, low-profile look. Installation was simple with the included hardware and instructions, and the built-in level helped a lot. Just make sure to mount it into the studs or concrete as recommended. Great quality and value for the price—highly recommend for anyone looking for a strong, no-fuss TV mount!

I like to write negative reviews because I am a geezer crumudgeon. Unfortunately there's not much bad about this product to write about, sigh. So, against my foul nature this here is a positive review. This is our fourth purchase of this product (let's don't get inito how many tv's there are around this place) and I likes it fine. It is easy to install, comes with all the parts you will ever need and even comes with a little cheapy level. Goes up in about 15 minutes and thanks to its clip attachment mechanisim comes off without a struglle. Once up, you can slide the tv left and right a bit to get the perfect fit. One thing it doesn't do very well is tilt up or down. You can correct this a little by using shims and extra washers. If you need a mount that tilts down, this here one ain't for you. In summary, this here mount is geezer approved.

This is a great, compact wall mount unit. It has a lot of flexibility for various VESA configurations, which was a good thing since our small 27-inch TV had the VESA-75 size (i.e., just under 3 inch spacing) and included screws(!) for that small size. Easy to install, easy to level, very slim unit. There is room within the frame for recessed power and cable/ethernet which although we planned for, we ended up not doing because of the problems bringing power to that part of the wall.

the wrong directions were included and the screws didn't fit my 8 year old sanyo tv. still easy to install. product was well made.

This mount worked perfectly for me! I as able to install in a few hours including time to wire a power outlet and cable jack behind the mount. A few things to note: 1. The listing mentions studs on 8" or 16" centers but does not mention compatibility about anything in between. I was mounting on a load bearing wall in my basement where the studs are on 12" centers. I assumed based on the images it would work and it did. If I had my way, the listing would say 8" to 16" instead of 8" or 16". 2. The opening in the frame is just tall enough for a medium sized outlet cover plate. I was able to wire the outlet behind the TV for a very clean looking installation. 3. One of the reviews I read mentioned that the mount can slide from side to side on the rails of the frame. I second that comment but I was able to find a solution. The lip and sides of the top rail of the frame create a sort of tray on either side of the vertical TV brackets. I just cut two small pieces of wood to lay in that tray, one on either side of the TV, and keep it from sliding. Mine was centered but if you wanted the TV to be off center you could just cut the two pieces to different lenghts. It is completely behind the TV so you don't have to worry about it being invisible. 4. Mounting Dream had great customer service! I emailed about whether the inputs on the back of my TV would work and they responded very quickly with comfirmation that everything would work. They were right. Overall, this mount is a great product and you certainly can't beat the price!

I used this for a small 36” TV, that I installed in my Grandkid’s room. Worked perfect and installed in 10 minutes easily (took my time). The wall plate is not wide enough to get 2 studs. Not a deal breaker but I try to avoid Molly, Toggle anchors, etc., in kids room. Recommend purchasing Mollys, Toggle or any wall anchors if plan to go larger than 36”. Pros Price Install easy Sturdy build Great for 20”-36”, works fine with 36”-50” Cons Width only reaches 1 stud

Very useful for a 50'' TV . Resistant and easy to install.

This item was a great value. It operated as promised. The delivery was as promised.

So far 3 years :) it works well with no issue and like it , easy to install and sturdy , recommend it

Quede muy satisfecho con el producto en general, valen un poco más caros pero valio la pena, se sienten súper bien hechos, buen material y acabados en general, y los seguros para asegurar la tv al soporte traen listones de tela y no se agotan nunca, no cinchos como otros, incluyen un nivelador de burbuja súper utila para la instalación, además de una plantilla en tamaño real e instrucciones completas y claras, se los recomiendo ampliamente

La instalada fue fácil (pero ya tengo práctica haciendo hoyos en la pared 😁). La television es fácil de quitar y volver a poner con este soporte, con cinchos acomode los cables en los herrajes que van en la television la television luce bien y se ahorra mucho espacio al estar empotrada. Me apoye de un nivel de burbuja más grande, ya que el que trae es pequeño

So when you spend this little on a product your expectations are not the highest. I knew my TV had a 400x400 mount and that it would fit but that this was also the max. So I got out my stud finder, picked the studs I was going to used and got to work. First off, the instructions were decent. I mean, it is pretty obvious, drill 4 pilot holes and lag em in but it is nice that if someone has no skills they can use this. It also tells you everything down to the screw size. It came with a very small level but I used my own for marking the studs which I recommend as the one they included was tiny. I really like how the rails clip on to the mount and are quite secure. I honestly feel like I could hang off of this thing which is good because my 50 inch plasma is heavy. Now the cons. Even with the spacers, this thing is pretty close to the wall. If you have side ports on your TV or a recessed cable area you are OK. When I have the VGA port from my computer in it wont lock into the mount on one of the rails. You could cut a small hole in the wall but just keep in mind if your cables stick out far it's going to be tough. You also have to remove the TV from the mount every time you change a cable, so get it ready with the cables in the back BEFORE you mount it to the wall. I put an extra HDMI cable in there and cable tied it in an area I can pull it down when I need it to not have to remove it later. (it is pretty easy to remove, pull the straps and lift. Over all I give it 5 stars. You cant beat the price and it is secure. Just make sure you are aware how close to the wall it is. You could make your own spacer and go to a hardware store and get 4 longer machine screws for your TV if you were so inclined. A 1/2 inch would make a big difference for your cables.

Bien hecho, lleva más de un año cargando mi pantalla y todo bien.