DAYUAN 26Pcs Universal Press and Pull Sleeve kkit, Bushes Bearings Remove Install Tool Set

Amazing kit for KIA front lower arm bushes. Covers a range of sizes. Ideal when using a Hydraulic press to push bushes out.

Great tool for taking out rubber bearings save me a fortune instead of buying the whole part you can just buy the bearings to put in your original part. Save you a lot of money.

Used this yesterday to change outer rear rose joint style bushings on my e92, this kit made it a breeze. Really heavy duty, well put together kit, highly recommend.

The tool worked perfectly however the first time I took the bearing off the medium bar to pull the new bearing in the thread wouldn't wind on again. Worked fine the wrong way around. Wire wheeled the threads on the bar to make them not have a sharp edge and greased the threads up. Worked better but still had to use a spanner to spin it past the first thread. The thick bar was used to pull the bearing out as the middle of the bush was missing used a 27mm spanner and ratchet to crack the bush free the first time. Worked perfectly first turn and pop it came loose. Then used the impact driver to finish it off. Think I skipped the manual wratchet for the second one. I did have to use my thick steel flat plate to pull the bush into the rear subframe as using the collar was far to hard even with four hands. Just hard to line the lot of bits up. Didn't want to destroy the round collar ends as it may have damaged the slots that the collars slip into so used the metal plate with a hole drilled in to protect the groves in the collar mount until the bush was mostly in then swapped to the collar in the round mount. Worked perfectly didnt bend. However will have to see what it's like after multiple uses. Excellent value for money. Will be able to use the collars with the hydraulic press I have as well. Spare thin bar and rubbers to hold the bearings together. One bearing was missing a runner band. Will be installing metal split collars when I get them. As they are not as likely to fall off or deteriorate with long term use . This kit is heavy and strong. Well built especially for the price. Also has a good range of sizes especially impressed with the fact they have intermediate sizes so these should fit nearly every bush size or bearing size. The collars should be perfect if you have a hydraulic press as they are thick and very well made. I looked for collars to go onto my press and they were fortunes so I just left it and used sockets however now I have this kit I will never need to force a bearing out just to use the old one to push the new one in. Didn't record us putting the bearing in as they were a good few mm larger then the hole until they compressed into the first bit. Bearings seem to be good enough however the metal is a little soft either side of the bearings. Hopefully they will allow replacement bearings and carrier's to be available separately in the future.

Omg brilliant works as described

Brilliant. Did a ford fiesta wheel bearing. It was in there real solid but shifted it and installed new one no problem. It's good quality for what it is. Bit boring winding the nuts along. 😅

We bought this as a solution to remove and refit a suspension bush. The biggest threaded bar was used and it broke, the bush didn't move! The quality appears good, but the reality is, it's shocking. Buy cheap, buy twice. I hope this saves somebody making the same mistake.

The kit looks good and seems to be of good quality, but it's not designed to work with regular sized cars. This kit is more aligned with bigger suv's, vans and trucks. The sleeves are large, far larger than anything on my suspension, and is pretty useless right now for work I need to do. Sure, it's my fault I didn't take much notice of the outer diameter measurements, I needed a 40-41mm to push out the bushings in my car, and this kit doesn't have it. As previously mentioned, the kit is better suited to large vehicles, it's not compatible with standard cars (I have a mazda mx5 nd). The photos of the product need to be updated with measurements to make people aware of how large the sleeves actually are (trust me, they're huge). I won't be returning the product, because with all tools they'll serve a purpose some day when needed. It looks like a good kit, well equipped, but monstrously over-sized.

First impression steel collars and good thickness. It's more than I expected. Kit is heavy. Lots of size options. As mentioned in other reviews use grease on threads and thrush bearing washers. I will update my review if it's junk. But so far for the price looks like a great kit for the money. It takes allot of time to make these pieces on a lathe or find at the hardware store. Probably money well spent. Probably useful for many jobs.

Son muy utiles de buena calidad

Funktioniert genauso gut wie Werkzeug das 10 mal so viel kostet

Me gustó la calidad de los materiales,aún no los eh utilizado pero se siente y se ve a simple vista lo bueno. El unico punto malo es que me llego muy golpeado y dañado el case. Muy mal por parte de DHL esperaba más de esa empresa logistica

Bonne produit