Product Description Tormek se-76 square edge jig has a new, patented design for sharpening Plane irons and wood chisels. It aligns a wood chisel automatically parallel to the universal support. The safety stops prevent the tool from slipping off the Stone and hurting your knuckles. The maximum tool width for this jig is 3-inches. The jig automatically lines up the chisel to its upper, Flat side so the tool always mounts correctly and grinds at 90 degrees. Conventional jigs need manual alignment. The lower clamp has a ridge in the center enabling shorter tools with a tapered shank to be firmly mounted, E.G. Japanese chisels. The upper base, which lines up the tool, is designed so the clamping pressure is distributed to the ends and the tool mounts firmly without a heavy tightening of the knobs. The jig is designed for grinding towards the edge with the universal support placed vertically and for honing away from the edge with the universal support placed horizontally. From the Manufacturer Tormek SE-76 Square Edge Jig has a new, patented design for sharpening plane irons and wood chisels. It aligns a wood chisel automatically parallel to the Universal Support. The safety stops prevent the tool from slipping off the stone and hurting your knuckles. The maximum tool width for this jig is 3-inches. The jig automatically lines up the chisel to its upper, flat side so the tool always mounts correctly and grinds at 90 degrees. Conventional jigs need manual alignment. The lower clamp has a ridge in the center enabling shorter tools with a tapered shank to be firmly mounted, e.g. Japanese chisels. The upper base, which lines up the tool, is designed so the clamping pressure is distributed to the ends and the tool mounts firmly without a heavy tightening of the knobs. The jig is designed for grinding towards the edge with the Universal Support placed vertically and for honing away from the edge with the Universal Support placed horizontally.
**Y
Truly is a square edge!
Does exactly what it is supposed to do. I have a lot of edges from hand plane blades to chisels and for whatever reason most of them have ended up out of square. I assume it was my old honing guide and grinding setup has caused this issue because every blade is out of square the same amount. When I first started using this jig I initially thought this was grinding the bevels uneven and ended up triple checking everything, including re-truing my stone. Once I started on another plane blade that was grinding the same exact way I thought I'd throw a square on my edge. Come to find out the Tormek setup was grinding perfectly square and all my blades were out of square which makes sense now that I think back to the adjustments on my planes. They all are adjusted slightly to the right to compensate for this out of square. So I currently have gone through and fixed 4 of my blades with a few more left to go. Each blade took about 10 mins due to the amount of steel that I needed to remove. IMO this is plenty fast enough and I couldn't be happier with my new setup.
H**I
I have sharpened my Step-son dull knives and his sister and they said that their ...
It was one of the Top of the Line sharpener I ever bought... A little expensive for me but I got to have it and I have not regrets. I have sharpened my Step-son dull knives and his sister and they said that their knives cuts like a sharp knife should. They are very happy and please now no embarrassing when they slice their turkey and beef in front of their dinner guests... I would HIGHLY recommend that you buy one because your knives will be the sharpest knives in the neighborhood. Easy to use...
R**.
I teach woodworking at a local community college. We ...
I teach woodworking at a local community college. We use Tormek equipment for student instruction so I am aware of the quality of the product which must endure student use and abuse. Based on this knowledge, I purchased the Tormek system for my home use.
M**1
Good Jig!
I like the improved version of the Square Edge Jig. It makes aligning the chisel much easier.
J**E
I use this jig on the wrong brand of grinder ...
I use this jig on the wrong brand of grinder, so I'll just say that this is a solid piece, square where it needs to be.
A**R
Perfect for a small shop.
Worked better than I imagined. Did in ten to fifteen minutes what would've taken an hour on my wet stones. Very well built. Worth the money.
J**N
Square edge jig
Excellent for honing secondary edges on chisels and plane blades. Hard to square up some chisels. Once squared, works as advertised.
G**.
Works great! Tends to run off the edge of the ...
Works great! Tends to run off the edge of the support bar of my Grizzly sharpener if I don't pay attention.
C**N
Tormek SE-76
E' un ottimo attrezzo che amplia le già notevoli possibilità dell'affilatrice Tormek.Consente una affilatura precisa degli attrezzi con lama drittatipo scalpelli ma anche lame di pialle etc.Sono contento dell'acquisto.
A**E
Edge Jig
Dieses Teil ist einfach toll, das kann ich nur jedem weiterempfehlen, super einfach und bedienungsfreundlich im Einsatz und alles 100% gut.
S**L
Five Stars
Perfect working order. Arrived quickly.
A**R
Five Stars
excellent
Trustpilot
2 weeks ago
3 days ago
