Company, LLC U35108 Slimline 3 Table Lamp-LED-80 CRI-Eye Care-4 Brightness Levels, 3,000 LUX at 30 cm, 1,065 LUMENS-4 Step DIMMER Mode, Brushed Steel, 25.6 x 30 x .8

Love this lamp! Puts out great lighting and adjustable intensity

This is the perfect light for use with a sewing machine. I'm totally impressed with it. The quality of light, flexibility and sleek design is a perfect addition to my sewing space.

Love it love it love it. Bonus for sewing? unlike other slim line lights the actual light bar itself can be turned away or towards you for precise light aiming without moving the neck of the light if you desire. I can easily clamp this to the right side of my sewing table that's wedged up against my serging table of a slightly different height. My only space option had been to clamp a lamp onto the back of my sewing table then bring the lamp to the front where I sew and the result would be that the lights for perfect lighting would be in my direct line of vision so I had to be slightly off and put up with shadows so I'd wear those lights plumbers wear that hang around the neck...my "headlights". That is a great solution but those don't hold charge long. As the video shows this beauty gives me the light I need without any shadow and out of my line vision. Can't beat the price either. Lightweight, out of the way looks good and the brightness I need. I'm ordering another for my serging station. I don't even notice I have a lamp there while I work yet it'll bend down n over for up close work and stays in place beautifully for hand sewing areas of my work like inside waistbands. Assembly couldn't be simpler. Just pop the two pipes together and tighten the screw and done. As with sewists everywhere lighting becomes a frustrating journey and I'm so glad that I now have an option to my headlamps I wore around my neck (already wearing a tape measure lol) which I became so used to I once accidentally didn't take them off when I ran out to the store. To anyone out there? The headlights around the neck are still the answer for a cutting station with overhead lighting. Especially nice when using a rotary cutter.

Just what I needed. I wanted a floor lamp that's slim, modern, would fit in a small space, and matches the mood of the room. The lamp profile is very subtle; it's also lightweight, and took me about 5-minutes to assemble (no tools necessary). It sits perfectly near the couch and under the wall art, and the brushed steel color goes great with my furniture. The LED light is bright enough to fill my living room, and there are four settings to dim the brightness. There's no remote control so placement matters to access the one power button. My favorite features are the twist-able arm for angling the light, and the flexible joints to change the pole style: whether vertical, 90-degree angle, etc. I've only had the lamp a few hours so I can't say it's worth the price, thought I intend on doing a follow-up review on overall quality and durability. Just a note, the lamp has a glare while on in photos, so I took a photo in my kitchen to show the size against furniture and decor. I also took photos of the light in daylight and at night.

UPDATE - I continued to be curious so I contacted Daylight. Even though it comes in two pieces they did not design it to be taken apart on a regular basis. This doesn't change my mind about the lamp, though. I still love it!! I've had the 1st generation (incandescent) of the Daylight Slimline for many years. Since it's an incandescent bulb the 1st gen gets mighty hot. I use this lamp exclusively for needlepoint (almost always in my Lowery floor stand; sometimes with the table base) so I lean very close to it, thus it's VERY warm! The 1st generation fits perfectly in the Lowery light bar and locks in tight so i put up with the heat. I was excited when Daylight came out with the 2nd generation with LED bulbs and immediately ordered one. While it's amazing quality (like all Daylight lamps) it doesn't fit in my light bar (the base is different), nor did it fit tightly in the clamp that came with the lamp or the table base i have. It wobbled so I couldn't use it and went back to the old one. When I saw the 3rd generation I took the chance and ordered it (knowing I could return it to Amazon) and it's perfect! It fits in the light bar just as tight as the original. As a bonus, they've redesigned the clamp and it fits super tight there as well. And since it's all metal (I got the brushed steel model) there's no danger of the clamp warping like one with plastic parts (if it does I have bigger problems than a wobbly light...). In addition to fitting in my Lowery, this lamp is in two pieces - the lamp itself and the lower part. While I'm not sure it's designed to take apart on a regular basis (that's a question for Daylight), if it is that will make transport and storage much easier. The other new feature is the 3rd generation is dim-able so you can set the brightness to suit your needs and the ambient light in the room. I can't recommend this lamp enough!!

This is an amazing lamp. Excellent illumination. I use two in my sewing room. One at my sewing table and one at my cutting table and ironing board. The LED strip is amazing. Intense illumination without heat. It was very easy to assemble. This is worth the price The flexible neck is also a 5 star feature. I am so happy how easy it is to move the floor standing lamp around. During the winter months , my husband and I use it at our dining table while assembling jigsaw puzzles.

Very nice task light! I use it for my computer computer. Attached it to the edge edge of my desk and it extends over my keyboard perfectly. Various adjustments for height. The light cover can be turned 300 to shine directly down or any other way. Very nice quality.

1sty one arrived and didn't work, second one only worked 3 months and the company won't replace or call back. Guaranteed protection and product are both terrible

I use this for crafting/art - it’s very bright and can easily be positioned to avoid shadows. You can dim it if too bright. It’s excellent for my needs.

Fantastic light! W bought a few years ago and liked it so much we ended up buying a second one. The delivery was prompt and delivered early.

I already own a couple of these lamps, they are amazing although a bit on the expensive side. Like I mentioned in the headline, they are great if you do close up work of any kind, in my case, and being retired, I do a lot of close up work, crochet, cross stitch, etc., and there are no lamps that are better than these. Highly recommend to anyone who also does a lot of "close up" work, they are AWESOME!!! Thank you!

Awesome light shedding the perfect amount of light with very little shadows.....

I purchased 5 lamps for my tattoo station and only 2 are still working. The power button is touch-sensitive, and after a while, it stops working. Also, the junction between the 3 different parts is not locking together, so I have put some tape to fix it. I have tried to write to the company on their website, but I never received a response!