Zona 35-140 4-in-1 Saw Set with Four Interchangable Blades, 36-555, 36-050, 36-458, 36-408, Black

This saw is a high quality, well made instrument. I don’t say tool because this is used for careful detail work for modelers or inlay and trim. I am using it with a stained glass art piece with a broken wooden frame that I am restoring , but I can see it used for doll house or model building. It can cut light metal also, such as K&S brass and aluminum. Multiple blades for different purposes with different sized teeth.

4 useful blades, one handle. Backed blades are 0.010 and 0.012 inch thick for fine cuts and the other two are 0.025 inch for general work. Sharp and durable. For more than occasional use get fixed blades so you don’t have to attach/reattach blades all the time.

The saw works great for fine cuts required for wood carving. All blades have fine tpi and make small curfs in basswood. I hate that Amazon bent the saw to fit in the shipping container and weakened where the blade attaches to the handle. The screw holding the interchangeable blade on has a tendency to work loose and you have to keep retightening. We will see if the saw will hold up over time thanks to Amazon's negligent packaging.

This is one of the best multi-saws I have used. Like others, it comes with multiple blades, in this case four, that can be attached to the handle. We use this as a craft saw primarily, but, in an emergency, we used this as a plumbing saw. After a defective PVC pipe had been attached (permanently, with plumber's cement) to our too-short cast iron drain line, we turned off the water, pulled the P-Trap and sawed off the defective pipe down to the very tip of that drain line using the second largest blade. We then sanded to expose the cast iron pipe and where it meets the PVC ring around it and then sawed, very carefully, using the smallest blade, through the remaining PVC ring, down to the glue layer. It was then possible to peel the PVC ring off of the glue and to sand the glue down so that a brand new PVC pipe could be glued on. It worked very well and allowed our family to save quite a bit of money on the fix. Or course, by "we", I mean me, and by "carefully", I mean over the course of about fifteen minutes going very slowly by a normal person's standards, but the saw was wonderful for this application and the project could not have been completed without it. Overall, this is a very handy tool to have around in a pinch. Good luck finding what you need.

Bought this for model ship building and they work great. Nice, precise cuts and with many different size blades there's a size for every need. so far have held up very well and the price was right. Very happy with my purchase.

I don't do many reviews but this item definitely deserved one.. I love this little saw in many ways, the versatility, the size, the quality, and the cost! It has a superfine kerf that is great for dovetails and very intricate cuts. But beware, it is EXTREMELY sharp and glides though hardwoods like butta and will do the same w a finger! And it's under $20... Your winning!

Mine arrived bent about 10 degrees. I bent it back, but I think the design is just a little too light since even a small saw needs to have a bit of strength. It works, so I'll use and keep it.

This saw is great for the money. The large blade is 32 TPI and has a depth of over one inch. And the thinner longer blade is 56 TPI. Both are great to make controlled cuts and switching from styrofoam to wood to coroplast without having to worry if your hobby knife blade is sharp enough to make a smooth cut.

Pretty light weight, but good value without shipping costs (add 50%)

Great product. Worth the buy. Using for model ship building and other wood working projects.

Muy util

Excellent

It is a perfect saw. Very sharp, very accurate, very well built.