Nimrod Ice Auger Adapter - Fits Mora & Lazer Strikemaster Auger & the Eskimo auger - Works Best With Nimrod SmartHandle - Just for new pin system augers, not a threaded handle - It is loose on the HT auger and is not recommended. - 8-3/4" long - 3/4" chuck where you connect auger drill - 3/8" chuck where you connect drill - Convert your hand auger into a power auger using a cordless drill! - Works with 3/8" or 1/2" cordless drill - Cuts up to 50 holes on a single battery charge - Cuts through 10" of ice in about 8 seconds - Three-sided arbor prevents spinning - Made in Michigan for Lakco - An amazing product!!! - A must for the Ice Fisherman!!! - You can use any 18 volt cordless drill (or larger 19.2 is also good), does not matter what brand, but has to be 18 volt (or larger), not 12 or 14 volt. (NOT recommended for lower than 14.4 volt drills.) - NOTE: This is for adapter only, auger & drill are not included! This is only so you know how it works! - NOTE: We have sold about 5000 of these over the past 7 years and only 3 people lost their augers. All three were when the guys put the drill in reverse; this loosens the drill bit. - **DO NOT flip from Forward to Reverse to back auger out of hole!!!** - DO NOT PUT DRILL IN REVERSE: PULL AUGER & CHUCK UP!!
A**R
Need to modify
The bit works great. However if the chuck loosens you’ll lose it all down the hole. I bought a 10 in threaded rod and put it through the 2nd hole for peace of mind. Other than that it works great with an 8in auger with 10in of ice. I used a 20v Lithium ion drill and did over 10 holes on one batt.
A**R
No more hurt shoulder
Works great
K**W
DO NOT BUY!!
DO NOT BUY!! First hole I drilled it started to bend. Second hole it snapped and bye bye auger. Can’t believe how easy this adapter snapped. So disappointed.
A**R
O my god changed my life!... ...
O my god changed my life!...so much easier than by hand and lighter and more dependable than gas ..make sure u buy a teather!
W**R
It saved my shoulders
It was delivered on time, it is simple and easy to use for my Eskimo ice auger.
R**S
One Star
Tried with 3 different drills will not work with an 8in auger
A**E
Cheapest way to graduate from a hand auger to a power auger....and it works great!
This is great! As long as you have a drill capable of turning an ice auger you should really consider this adapter. I went with a 6 inch auger to save battery and hopefully take it easier on my drill but after some test holes I think I could easily turn an 8 inch with my Ridgid brushless drill. One thing that is missing is something to prevent your auger from falling through the hole Incase the drill chuck loosens up. I just used a bolt that is an inch longer than the auger on each side so it will catch the ice and save my auger.
T**M
Good
Works as intended
Trustpilot
3 days ago
1 day ago