1/2" ID x 3/4" OD - 10 Ft High Pressure Braided Clear PVC Vinyl Tubing Flexible Vinyl Tube, Heavy Duty Reinforced Hose Tubing, BPA Free and Non Toxic

This is a great strong hose. It actually is capable of handling 200psi but may i suggest that you use a good strong hose clamp.

We bought this tubing for a bit of an unusual use — as a temporary exhaust pipe when repairing trucks with Webasto or Espar heaters in our shop. We needed something to safely guide smoke and fumes outside during tests, and this tubing works surprisingly well for that purpose. The material is tough and holds up under the heat and pressure during short runs. It’s reinforced, flexible, and doesn’t collapse or kink easily. Being clear is also a bonus — we can actually see the exhaust flow, which helps during troubleshooting. It’s BPA-free and non-toxic, which is a plus, even if we’re not using it for fluids or food. It’s probably not designed for high-temperature exhaust systems long-term, but for our setup during repairs and diagnostics, it does the job perfectly. Pros: Durable and reinforced for pressure Flexible but sturdy, doesn’t kink Clear tubing helps visually monitor flow Works well for shop exhaust routing in short bursts Good value for 50 feet of tubing Cons: – Not rated for continuous high-heat use (but we didn’t need it to be)

It's water hose..it works..😃

This was purchased to add to a hand fuel bulb for pumping gasoline and it works well for my temporary usage.

Used this for our turtle tank pump. Wanted clear to see the water moving, but can't actually see the water movement since no bubbles go in. Works great, sturdy, not afraid this will break like the black one I had previously.

Excellent quality. Good price. Thank you. It's decent quality. I used it for power steering flush . Its ridgid and not really soft. Very kink resistant

I bought this hose for my custom cooling system for my PC. In that application, there is almost no pressure, probably less than 10PSI. So, I didn't really need pressure hose, but I think the embedded braiding enhances the appearance of the hose in my system. As an added bonus, the actual dimension were absolutely perfect for the compression fittings I am using. The OD, ID, and actual thickness are such that the hose fits over the barb snugly but not so snug as to require a lot of force to be seated. Then, the outer wall is such that it fit the compression ring perfectly. The net result is that I was able to tighten down the compression collar fully with only moderate force, forming a leak free joint with little effort. Quick tip: If you have some sort of barb you need to fit this hose over and it is just a little too snug, you can soak the end in 180F water for a bit and then apply the hose to the barb and then the compression ring to the hose-barb assembly. I have had to do this in the past in similar situations, but this time the match between fitting and hose was as perfect as perfect can be. If you are also trying this sort of application and are curious about the fitting, I used "Barrow G1/4" to 1/2" ID, 3/4" OD Compression Fitting for Soft Tubing, Silver Shiny" fittings. I feel I should leave my exact hose dimensions here for other people with tight tolerances, but I can't find my darn digital calipers. If they should turn up, I will edit this review with that info; I figure someone is going to want to know that. I hope this helps and thanks for reading.

I used this for condensate pump discharge. Solid tubing. Unrolls without bending or kinking. Size was spot on. Price was higher than some but you get what you pay for. I tried using a less-expensive product but it kinked and was almost flat in places. I highly recommend this strand of tubing.

Just received, One word Value For Money

Good, solid reinforced tubing. good for my project.

Gracias

Product good....little bit costly

Good quality and worked