Fastbond Contact Adhesive 30NF, Neutral, 1 Quart Can | Low-Odor, Water-Based Adhesive, Bonding Range of 4 Hours

Not many times in a person's life where they need a gallon of glue, but I needed several gallons to replace the roof of an RV. First layer is wood to styrene, second layer is wood to wood. This stuff worked beautifully. Poured it into a paint tray, applied with a texture roller, easy peasy. It gets tacky within a few minutes, good adhesion not long after, but takes a while to fully dry/cure. Overall, it's very easy to work with and does a great job. I am also quite happy that it seems to stay usable while sealed for a long time - I've got about a quart left in the jug, and a month later it's still perfect. This stuff isn't cheap, but like most magic 3M chemicals, it does exactly what it says it does and does it well.

I used this to wrap a drum set I was building. It worked flawlessly. You have to allow each piece you're gluing to dry for about 45 minutes before you put them together...BUT, once you touch them to each other, that's it, they're not coming apart. No, this stuff isn't cheap, but it works.

So my dumb self decided to use this on some furniture linoleum (Forbo) and for some reason I wasn't prepared for it to stick so well and immediately. It barely grazed it and that was it. I ruined part of my desk because it was impossible to remove and I stretched/ripped some of the linoleum in a panic trying to get it off. User error. Wish I had a helper at the time. Anyway very easy to apply and low VOC make this a great product. Just be careful when joining the two parts.

Only that it costs a lot more than Weldwood Contact Cement. But I think it's worth it to have a non-fumy option. On the down side, I found this cement will NOT adhere to anything plastic, including plastic (caulk type) wood filler. Lots of extra work patching in all the voids with wood so the water-borne contact cement could adhere.

This worked really, really well! I was able to relaminate my 8 ft countertop and a second smaller countertop with some left over I also made backsplashes for both. One thing that helped a lot was to get a Bestt Liebco 588950700 Tru Pro Frieze Nylon Loop Roller Cover. When I did the longer countertop, I used a longer nap roller and it was hard to get an even coat, so product was wasted and it took a long time to set. But for the second one I use the Besktt Liebco Freize Roller and it gave me a nice even coat, really perfect coverage. So I highly recommend this product. You need to follow the instructions carefully. I let it set 90 minutes or more before bonding, longer with the first one because the coat was uneven, too much in spots. This makes it stronger. You have 4 hours to bond it, so that's good in a way, though it does take longer.

This is a product I’ve used countless times to glue styrofoam sheets together. Although a very time consuming and tedious process, this glue DID NOT work. When this stuff isn’t stored properly in a warehouse or too old, it can go bad. I ordered two bad jugs. It was very unfortunate and ultimate cost me a $1000+ in other adhesives and labor to fix this mistake. I’m not saying the product isn’t a good product by any stretch of the imagination but do small tests to make sure that it is doing what you need it to do before wasting an expensive bottle of glue. Positive note, if this does happen to do with foam. It creates enough of a barrier that you can use a more violent adhesive without melting the foam into a puddle.

I've been using good old Weldwood contact cement and getting high. This glue doesn't have the smell, or get you high. It's water base so cleans up easily. And best of all it glues just as well as Weldwood. I've switched.

It was good to have longer open time. Since our 1st time installing formica. Wiped off easy before dried. We did 2 coats. It had great adhesion. Highly recommend. We used solvent based contact adhesive we'd bought to practice and we were outside. Smell was rough. So glad I saw this on youtube.

Parfait à ce que j'attendais!

Pega muy bien materiales como papel, cartón o madera. Seca casi de inmediato. Cuando seca de convierte como en silicon.