Galaxy S10 Plus Screen Protector, [Dome Glass] Full 3D Curved Edge Tempered Glass [Exclusive Solution for Ultrasonic Fingerprint] Easy Install Kit by Whitestone for Samsung Galaxy S10+ (2019) - 2 Pack

My review will be in multiple parts, first section will be my experiences and the second will be tips and tricks.Experience:-I blew through the single pack and in the end it resulted in nothing being installed and I was left without a screen protector on my phone until my 2 pack came in.-My first attempt with the single pack was not on a level surface and the adhesive slowly made its way to the edge until it got sucked into the two pieces of the clear tray.-My second attempt with the single pack created a bubble right when the screen protector touched the glue.-Once my 2 pack came in I really sat down and studied what others had done in order to get everything right and it came out perfect! No bubbles (initially, continue reading) and the fingerprint sensor works (not as good as without but it's a 95% hit compared to a 98% prior).-My first glass (from the single pack) had 4 bumps, two on top and two on the bottom. I was unable to successfully use that glass.-My 2 pack glass had 4 bumps as well but they were 2 on the left and 2 on the right this time.-If I had to guess, the one with the bumps on the left and right is an updated version that should work better with the fingerprint scanner.-I did reregister my fingerprints and all is well. And I only registered each finger one time, for those wondering.-I do have to keep my finger on the scanner for slightly longer than prior. Not a big issue but worth noting.-After a few hours a bubble did form. It is near the middle of the screen but barely noticeable, especially with the screen on, and it is not a large bubble by any means.-After days of being installed the bubble hasn't grown any larger.-Turning on touch sensitivity does not change anything! I am currently using my S10+ without touch sensitivity enabled. Touches and my fingerprint scanner both work great!-The official Samsung LED wallet case does not completely close after installation. I would assume this would be the same on any other Samsung flip-style cases.-So far I am not having any issues and am pleased with my outcome significantly. I highly recommend this product for those who want or need a tempered glass screen protector on their S10/+/e.-My screen protector is slightly more to the left than it is centered. This isn't a big deal but does make some cases that fit previous generations of Samsung phones with the dome glass no longer compatible. I purchased the Fusion-X by Ringke and it appeared to fit but I was mistaken after a short time.-As stated above, some cases will attempt to lift the protector. My case lifted the top left just slightly, not enough to bother me, it's not visible with the screen on. It also affected the performance of the fingerprint scanner. Needless to say, I am no longer using that case and went back to the official Samsung case.-The screen protector makes the fingerprint sensor more sensitive to dry fingers. If you come across multiple failed attempts after about a week of your screen protector being installed just get your fingertip wet and give it another try.Tips and Tricks:-Install on a level surface! This adhesive is very runny, similar to oil in my opinion. If it's not done on a level surface then you will have issues!-Watch the manufacturer's installation video as well as other videos online of those installing the protector to see how they do the installation.-I recommend installing this screen protector in a bathroom. Turn on the shower to the point it starts to steam up and keep the fan turned off. The humidity will keep the dust down and assist with a bubble-free install.-My second attempt failed because it created a large bubble when the screen protector smacked into the adhesive. To combat this, I pulled out the pin (as called in the instruction booklet) far enough to just barely hold up the glass, this puts the glass at a slightly different angle. When I tilted the phone I then waited for the glue to touch the screen prior to pulling the pin completely out. It did go slightly past the arrows but I have no issues so you shouldn't either.-Tap on the adhesive bottle a few times once you have dispensed the glue, this will get you an extra drop or two. It's better to have extra than to have bubbles or air gaps.-Just as the instructions state, cure the top and bottom for 15 seconds each, only one time. DO NOT EXCEED THIS AMOUNT OF TIME! After this is done you want to firmly, and I mean FIRMLY, press and hold on your screen where the fingerprint scanner is located for a minimum of one minute. This will minimize the gap between your sensor and finger resulting in a better response and useable fingerprint scanner. My glass did not move when performing this, but still be cautious. Imagine you're upset with your phone. Not to the point you want to break it, just to the point you want to show it who's boss.-After pressing firmly for one minute I recommend curing the top and bottom again, this time you will cure until the UV lights automatically turn off (approximately 45 seconds). When you get to the bottom half, you should press firmly again on your screen where the sensor is located as it's being cured.-After curing for a total of 1 minute on the top and bottom I recommend curing in 3 sections: top, middle, and bottom. Do each until the UV lights automatically turn off.-After about 12 hours I added each thumb once more. This time registering was significantly improved over the initial. I did not have to press as hard and I get less errors when registering. After adding the fingerprints, I immediately remove the old. I have since then added new and removed the old about 3 times now and it feels like without the screen protector, minus the longer time I have to keep my finger on the scanner.I hope this helps those who are on the fence about purchasing this, it's a thumbs up from myself!I will try to update this review as time goes on.

I gave it three stars, and after i re-installd the the screen protector, I gave it 5 just because the fingerprint worked really good.1) I removed the screen protector i had and re-installed it, you dont have to buy a new one and spend more money. There is a video ive found on youtube that helped me a LOT!! This guys channel name is UTECHPIA, and he uploaded a video called: "How to re-install the Dome glass screen protector."Just follow the instructions and you will be all good.( ive subscribed to his channel and gave him a Like) thats how good i was pleased by the video.It really worked.2) there is a review here on amazon of a guy named " outbreak444" and the title is : "how to get a perfect install!!" Hes a GENIUS!!Do EXACTLY as he says, i guarantee you, it WORKS GREAT!! Im so happy the fingerfrint sensor finally reacts and i dont need to press with my finger so hard. Follow those two men and you will be good, I promise you. You just need to follow their instructions, and to be very patient. Thats all.

The product works as described. Not sure where the issue is with other people and the fingerprint sensor but mine is working correctly. I did do something different with how I cured the glass though.After you see the LOCA has completely spread, try doing this. Dont use the UV light just yet, place one of the unopened alcohol swab packets over top the fingerprint sensor. Place it carefully because this can cause the glass to shift if you're too forceful. Once the sensor is covered, use the UV light on top and bottom for 15 seconds each. Remove the phone from the installation case and press your finger down on the fingerprint sensor for 60 seconds. After 60 seconds, keep your finger pressed on the glass and start treating with the UV light for about 30 seconds. Continue the rest of the installation as described by whitestone.The difference in doing it this way is the LOCA is still more fluid-like at the sensor. So when you press your finger down for the 60 seconds it'll help create a thinner barrier between your finger and the sensor, giving it a more accurate read. Hope this helps out

Truthfully, I was skeptical with this purchase after I botched the installation on a previous purchase. I installed successfully on my s10 plus after following the instructions very carefully. It looks good and feels good. Ultrasonic fingerprint sensor works. Does well with a standard hard clear case so far. Price is a little high, but thata to be expected since this product is the only glass screen protector that fully works on the S10 plus.

If you look at my account you will see that I rarely ever write reviews and generally they are negative reviews but I felt that this product deserved a review. I have been chasing a good screen protector since I had my Palm OS ( many of you guys will have no idea what that is). I have always been disappointed in the products from film to tempered glass to some liquid you just rub on, they all seemed like snake oil. This screen protector blew me away, it worked like it claimed and it looks amazing and if you throw the instructions away and follow some of the instructions on YouTube you can't get it wrong. Most important you need a level surface and be diligent cleaning the screen and removing the dust then the light and you have an amazing looking and feeling screen protector.After installing go into setting on your Samsung S10 and go into Display settings and Turn on the touch sensitivity option then delete your fingerprints that have already been enrolled and re-enroll your fingerprints with the protector on. Works about 60-70% as good as the original you just need more pressure. I don't know why it is getting bad reviews, it wook about 8-10 minutes and worked as described. I'm very impressed just please drop the price a bit, $80 is a lot for a screen saver but is it better than $400 for a new screen.

Ordered a couple of days ago.Arrived prompt and after installation (even watched 4 times a tutorial on youtube specially for this screen protector being installed on a s10 plus) and ithe gingerprint does not work anymore!So it is a big scam as I tried twice having a double pack.Advise not to buy as it is all a big lie!Install it and say adios to your fingerprint reader

I fitted this after analysing the new video thoroughly. It was cured about 6 times and although accepted my fingerprint after pressing so hard it felt like I would break the phone, it wouldn't unlock. Multiple tries multiple curing nothing works.

These whitestone dome glass prtectors are brilliant well worth the money. my only advice would be to buy the twin pack as there better value, fitting the screen protector was fairly straight forward just watch some you tube videos first to fimiliarise yourself also i found that when you you are at the curing stage with the uv light i found that cure the top first for about 10 to 15 seconds then work down to the middle and then to the bottom only when you get to the bottom cure it for about 5 to 7 seconds then hold your finger on the fingerprint scanner for a second or two and then cure the bottom straight away as soon as you lift your thumb of i cured mine about 3 to 4 times using this method and i have to say the fingerprint scanner works brilliantly in fact id say it works better now with this protector than it did with the thin film prector the phone came with from new take your time and it will turn out just fine thanks

There's a trick to the s10 series of done glass you need to know during the install process. After the first 15 second cure on the top and bottom press and hold down on the finger print read area of your phone for 15 seconds with your thumb. This thins the glue in this area. Then quickly do the 60 second cure on the bottom of the phone and proceed as the directions tell you. If you don't do this your phone won't recognize finger prints and it will constantly ask you to press harder. It's also extremely difficult to register fingerprints if you don't follow these instructions. Trust me you'll thank me later.

The screen protector is nice, easy enough to install if you watch the video but the finger print reading aspect is touch and go (no pun intended) for the price of the product I would have liked the reading to be perfect.I have deleted and redone the scans 3 times for each finger/thumb I use after it had been on a while and it is still problematic. I prefer to have the protector on and use facial recognition as a result but it would be better if they sorted the above issue out.