12 inch x 8 inch Heavy Duty Shelf Brackets, Load Capacity: 600lb, Black Metal 90 Degree Supports for Shelves 10-Pack, Wall Mounted L Bracket for Floating Shelving with Screws

I was concerned about some of the negative points on other reviews, but the seller has obviously paid attention and resolved any concerns. The brackets I received are very nicely finished with a heavy coating. They were packed with protective end caps and layered between cardboard so none of the brackets had any marks on them even though the shipping box showed signs of rough handling. The support bar is fixed into slots and welded from the back side so the front side is smooth and clean. These are very nice, strong brackets and look nice enough for almost any location. The screw mounting holes on my brackets were offset from the support bar and I installed them easily with an extended driver bit for my drill. The included screws are more than sufficient for mounting through drywall into studs. The shelf screws were a little long for me because I only used 15/32 plywood shelving, so I added washers. But they will be fine for 3/4" shelf boards.

These brackets are of premium quality. Strong and efficient. Installation was easy as the mounting holes are off-set to permit drilling beyond the support arm. However, the screws provided aren't efficiently long enough to support the weight it's said to handle. Easily remedied. Just add the longer screw if your shelves require the heavy support they suggested.

Super sturdy thick steel

After a year of research and consideration knew just about everything this was to know about pricing, colors, styles, you name if for wall brackets and hardware. For me, this are perfect. 10 heavy duty black quality attractive easy to install shell supports. Can NOT be happier. To my surprise, thick tight threaded long screws for the wall with small screws for the boards. Used a drill bit first to make application of screws easier. Drill bit as thick as the screw, but not as wide as the threads. Wasn’t certain these would hold these heavy brackets considering how much weight they’ll hold. Super snug fit. Very sturdy with added shelf. Needed a screw driver that could angle and also ratchet. Since my cordless electric screw driver didn’t fit well. Made the awkward angle for the second and third screw easy to navigate With the screw driver. Happen to have this type of screw driver already. Worked great. I’m using this first order for kitchen shelving over the stove and counter. They look really great. If someone doesn’t like black, these would be easy to primer and change the color. Even though there’s negative reviews for various reasons, if you’re looking for a sturdy steel black shelf brackets to support a lot of weight including screws these are for you. The price is phenomenal and I couldn’t beat it anywhere else. From big box to small retail and online searches. One of my all time favorite finds on amazon.com

I should have taken a photo, but I didn't. I had to order these 3 times to receive them. The first 2 times the order said it was delayed and then canceled due to delivery issues. The 3rd time, which was going to be my last attempt, they were delivered but the box was ripped apart and they were hanging half out not fully packaged. Luckily, there was no damage, and all of the hardware was there. Besides those issues, the product itself is well made and heavy duty. I'm using these to put some music equipment on the wall for better organization. Definitely able to hold up a ton of weight especially if you hit a stud for support.

I am pretty impressed with the quality of the brackets and sturdiness. I ended up using 3 brackets to mount on a 16” wide maple slab top (5’ long) which in itself weighs about 30lbs+. Let me tell you what, those little guys are solid. I would definitely recommend to drill into the studs, especially if you are mounting a heavier or wider shelf. Comes with all hardware and anchors if needed. 10/10!

Good and sturdy brackets

They are the best brackets I have used and a great price. I have used them at 3 properties I have owned. I just finished installing 93 in a 40x36 garage I had built. Before that I used several in our attached garage. They are every bit as strong as they say. In the attached garage I used 16 on center where I stored bolts and screws and on the back where I have my whisky it is 32 on center with !/2 inch plywood. In my new detached garage I used 23/32 shelving plywood. I am attaching pictures with the filled shelves being the attached garage and the empty shelving in the detached garage. I used 3 1/8 #10 GRK RRS screws into the studs.

The metal strips are around 1.5 mm thick of width 15 mm (approx.). The diagonal support joining the angle/bend left welds in a few pieces. Good for light weight 5-7 kg loads. The bracket bent for one shelf, load approx. 5-6 load (books)- the diagonal support in one of the two brackets installed in this shelf was detached when received by me. Good for light weight loads.

these are really sturdy and well made. I was surprised at the quality

Strong and look great - finished a kitchette with these to make shelves as there wasn’t enough headroom for upper cabinets. Strong enough for one set of 3 to hold the microwave & one set of 3 to hold the dishes. Very happy!

Horrible product... It's very weak and came out inas soon as loaded rack within 15 mins of install. Broke many items placed on rack and also got bent and broken. Do not buy.

Good quality, nice you get 2 different length screws