AUTOFEEL Led Light Bar, 7 inch Led Pods Light with 5500LM 6500K White Lighting, 2Pcs 60W Flood Spotlight Fog Beam Combo for Off Road Driving/Night Driving, Compatible with Truck ATV Boat SUV Motorbike

I purchased two pair of the 7 inch Led Light Bar, Autofeel LED Pods recently as upgrades for my F250 Super Duty. So far I am very happy with the purchase. The lights arrived on time and well packaged. They are small, but the aluminum housings feel very solid. The clear one piece lens wraps around the front and sides of the light and appears to be sealed very tight. The only place that looks like water could get in is through the rubber grommet where the electrical wires stick out in the back. A dab of silicone should eliminate that possibility. These babies are plenty bright!! After the installation, my wife was following me home from a meeting and I accidentally hit the switch for the rear lights. Once home, she "let me know" that the lights were very bright. The part I can repeat is that she saw spots for ten seconds after the lights were turned off. I intend to use these lights for off- roading and to light up night time construction projects, so I am sure they will provide ample light for my purposes. For my project, I ran a heavy gauge wire from the battery on the passenger side to a small fuse block on the drivers side of the engine compartment. This setup afforded a safer and more accessible location for multiple 12 volt power connections and allowed for a more logical penetration through the firewall for the switch wiring. It also provides multiple in line fuses for circuit protection. Each pair of lights are connected to the power supply through pre-made wiring harnesses also purchased on Amazon. The harnesses are grounded to the chassis, so running a wire to the negative side of the battery is not necessary. I am currently (no pun intended) running a 20 amp fuse from the battery to the fuse block and 10 amp fuses through the harnesses to the lights with no issues, a clear indicator that the lights consume little power. I mounted the front lights on custom brackets in the location where optional factory tow hooks would have been in the event that the new lights were bright. Didn't want to blind other drivers. Good thing I did! The rear lights were hung on some clever brackets available on Amazon that “pinch” the bumper or hood sheet metal. Next I hooked up the harnesses to the lights. The front harness was perfect right out of the box. The rear harness had to be lengthened, but I knew that before the start of the project. Connected the harnesses to the 12 volt power and (angels singing in the background) Bam! Pure white light where once had been nicotine stained light. No more tired eyes from driving at night. It is important that these lights be properly aimed if you plan to use them on the road. Their design features provide for light that illuminates the side of the road as well as further ahead. The light pattern easily exceeds the range of my factory head lights. YouTube has the information needed to aim them properly. I will post an update in the future to attest to their durability. As for now the price, quality, ease of installation, and brightness of the clear white light make me a fan.

These lights are bright an look great at night.. until they don't!! I have a set hooked up to my trucks rear bumper as backup lights, I got a solid 6months out of them, then typical LED issues, yurns out it was corrosion in my factory ground wire, once i cut an replaced that area they function as when first installed, great adjustments, I now highly recommend these to any trailer or alternative backup light. Or a great utility light. Anywhere you need a bright flood light, also they need a minimum of clean 12v to function properly if you only have a few lights an it flickers or is very dim check your power, or in my case the ground/earth connection. These will work with 24v systems too, but any less than 12v not gonna work right. Highly recommend these build quality is amazing these have been submerged many times, smacked around and still work amazing..!

These are really well made, and very bright! They are too bright to be used as fog lights as they blind oncoming drivers, but they are great for dark areas, empty back roads, and trying to find a house in dark neighborhoods. The mounting bracket is sturdy and the light doesn't move after being tightened, even on bumpy roads. The light itself feels very sturdy and so far, I've had no issues with water condensation on the inside, like many of the cheap LEDs get. The beam pattern is interesting: there's one spot pattern facing forward like a normal fog, then there is a flood left and right of that, and flood center, and a very tall flood pattern it lights up the top of tall trees on roads. If driving on the highway where cars are passing in the same direction, they will light up the inside of SUVs/trucks (you can see the drivers head and any passengers as they drive by), and the tops of bridges.

I purchased these (twice) for use as DRLs (Daytime Running Lights) on my 2019 RAM truck. I have mounted them below the bumper. The first pair lasted about 1-1/2 years, because of moisture. I liked them so much that I re-purchased them. This time I sealed the edges. They've lasted about 2 years so far. They are BRIGHT, so be sure you don't direct the light upwards, as if you were running your headlights on bright. They accomplish what I wanted, I'm very pleased with them. Price is right, so will continue to purchase as these burn out.

I ordered these for my truck a little while ago. I forst got them and was a little disappointed in the size - but after I got them working and saw how much light they give off, I completely changed my mind. They are just right for extra illumination needed when I am plowing or need more light in general. The lights (2) come in a small box and the connecting cable on each has a power and neutral wire. They are about 5 inches long and need to be safely wired to your power source. The lights attach by fastening a baseplate to the area you want the lights to be, and then attaching the lights to that baseplate. They (the lights) are adjustable on the baseplate and can be positioned and repositioned as needed. There are accessories available for these lights, but they are delivered by themselves. - just the lights and baseplate(s). I rigged an on/off switch for the cabin of my truck and had no issues with it at all. If you can get these attached to your vehicle, you can probably get them wired. The light given off is very bright and able to illuminate everything for many yards. I was extremely pleased with the field of light considering the size of the lamps themselves. I am really happy with this purchase.

I love how it throws out the lumens. Installed on a 2006 yamaha which was super easy! Wish I bought three of these things - one for each bike. They are super bright! Have had this thing in pouring rain while riding the dirtbike, also loaded into the bed of a truck during pouring rain + 75mph tx speed limits - - no water made it inside! Only caveat - my equipment is cleaned/dried, and stored indoors after its use outdoors. Not sure how this would fair with UV + repeated weather cycles. I would have preferred the wires coming from the light be about 12" instead of the 6" provided. Wasn't quite enough wiring to get it tucked away without the connectors being exposed/accessible. Overall - I'd get more of these in a jifi. Actually, two for each 4 wheeled vehicle, and one for each two wheeled vehicle! *Voltage:12-24V * Wattage: 60W/pair * Material: Die-cast Aluminum housing; PMMA lens * Light Color: White * Color Temperature: 6000K – 6500K * Luminous flux :5500Lm/pair * Lifespan: over 50000 hours * Size: (6.2*1.58*2.16Inch)15.23cm*3.8cm*4.1cm * Beam Pattern: Combo Beam * Mounting Bracket: Stainless stell brackets

Second time buying these lights for 2 separate projects well worth your money!

I bought this for a small duck skiff, and was hesitant to purchase because the IP rating at the price seemed hard to believe… but being (2) in the package I figure if it doesn’t hold up I’ve got a back up ready to go. The mount is somewhat difficult and I have a feeling may need frequent tightening. I did throw out the provided hardware and upgraded it to marine grade stainless bolts and lock nuts to try and avoid that issue. It also doesn’t seem to be the most well constructed light bar ever - but, at what breaks down to $12.50 each - it won’t hurt my feelings too bad if it’s a disaster. All that said though, it’s the brightest 6” bar I’ve ever seen, and completely lights up my neighbors house over 50 yards away. Additionally, I ran it for well over 20 minutes and the housing was still fairly cool to the touch. Hoping to be pleasantly surprised, and if it wasn’t going to be in such a harsh environment I think it’d be great.