RealTruck TruXedo Pro X15 Soft Roll Up Truck Bed Tonneau Cover | 1485901 | Fits 2019 - 2025 Dodge Ram 1500, Does Not Fit w/ Multi-Function (Split) Tailgate 5' 7" Bed (67.4")

I am absolutely thrilled with my TruXedo Pro X15 Soft Roll Up Truck Bed Tonneau Cover for my 2023 Ram 1500! This cover has exceeded my expectations in every way possible. The sleek, low-profile design enhances the truck's aesthetics, giving it a modern and stylish look.Installation was a breeze, thanks to the user-friendly instructions and the well-engineered components. The cover fits my Ram 1500 like a glove, and the quality of materials used is evident. I appreciate how it rolls up effortlessly, providing quick access to my truck bed when needed.Weather resistance is top-notch; it has kept my cargo completely dry through rain and storms. The durability of the Pro X15 is commendable—I can tell it's built to last. Additionally, the secure and tight fit doesn't compromise fuel efficiency.Overall, the TruXedo Pro X15 is a fantastic investment for anyone looking to protect their truck bed with style. I highly recommend it for its quality craftsmanship, ease of use, and the added aesthetic touch it brings to my 2023 Ram 1500. Worth every penny!

Product arrived quickly and packaged well. All parts were there. I budgeted about 2 hours in the cooler part of the morning (NC) to get the job done. I was finished in about 45 minutes, but had to tweak it several times to make sure everything was centered. Overall time was about 90 minutes to install and secure it. The latch mechanism was not 100% clear to me at first how to secure the top, but after a few minutes, figured it out. I also read through the troubleshooting section and realized I could pull the entire top slightly to one side at the head rail which fixed my centering problem. Well made. I may have more details one I have mileage on it. Has 0 miles on it right now. Looks good though. Photo was taken before full tweaking was complete. 2025 Ram 1500 Laramie. First time installer but relatively good with tools.

I bought one of these for my wife's new 2020 Ram Laramie. I have a Truxedo Lo-Pro on my 2017 Ram and was looking for something similar for her truck. The Lo-Pro doesn't fit the 20 Ram but found the Deuce. I sure wish I had seen this when I was looking for a cover for my truck!! This thing is great! Installation was straightforward and with a couple extra hands (wife's) we knocked it out in about 3 hours start to finish...but we took our time and adjusted the clamps several time to get the position just right. Take your time... use spring clamps to get it in just the right position before bolting it all up. The fact that this cover can be opened from the front is the best thing about it. Looks sharp and is tight. Doesn't sit up too high and is only about 1/4" higher than my Lo-Pro. It doesn't cover the bed rails, no blowing around while driving and no noise.We watched a couple videos of the installation from Truxedo before tackling this and it was worth the extra time. Although I have installed Tonneau covers before, it never hurts to see what might be a bit different with each model or type.We also purchased the Truxedo Expedition Luggage bag for the back. Again, great product and well made. You cant beat Made in USA!!!! I'll leave a review for that product on their page.

I’ve installed several similar covers on my trucks in the last few years. This one is the best and the worst, combined. It looks really nice, seems well-made and the first steps of installation went well.First, installation was straight-forward and I had the rails and cover installed in less than 15 minutes. The ridges on the clamps match the ridges on the rails and the clamps work well. The cover and rails slide together well and the foam gaskets stick well (except for one that just won’t stay on. Manufacturer want to contact me to replace???).What took the next 45 minutes was moving it around to get the very close tolerances (front to back) to allow no gaps. There is maybe less than 1/2 inch from side to side and front to back. It’s almost as if the rails and cover are too short by about 1/2-1 inch. The item I purchased said it was compatible with 2019 and above RAM 1500. I was installing this on my 2020 RAM Limited. Following the instructions, upon first closing the cover, it was about 1 inch away from the tailgate. Thus, I had to loosen each clamp and move the cover to allow the closing gasket to touch the tailgate. At this point, there was a 1/8 inch gap at the cab. Loosen again, tap and move, test, etc... Finally, I have about a1/8” area touching the tailgate, and a 1/8” area touching the cab area. It is terribly difficult to close. I don’t know if I was shipped an incorrect item or it was boxed incorrectly, but at this point, I guess I’ll see how it goes.Now that I’ve received and installed, the item is about $100 over priced. I’d think twice about getting this item again.Manufacturer, feel free to reach out if you have ideas. I’d love to give this a better review, as I can see some positives, but there are some negatives.

Easy install although instructions could be a bit better. Looks great on my black Ram truck. I wanted the canvas type material because it's not glossy like most roll up covers. I also like the very low profile fit. There was just a tiny bit of water leakage after a week of rain and truck outside. I'm pleased with that.All in all it's a great tonneau cover.

Looks great and was priced reasonably....will know more about durability a couple of years down the road.

Was not sure.This was what I wanted when I ordered it. Now I am so happy that I chose this unit. Heavy duty and well Made and fits perfectly. Easy to install..MAKE NOTE: The rubber seal on the back tailgate will be curled in when you first install this.. This goes on theTOP of the tailgate not slip inside the tailgate. Simply make sure that you set the rubber strip on top of the tailgate for a while and it will straighten out when it heats up..I don't think you will be sorry

Avec le vidéo, ca aide vraiment pour l'installation, j'avais acheté la même en 2019 pour mon autre pick up, seul bémol la toile a plus que doublée de prix...

If you think IKEA has hard-to-follow instructions, then TruXedo takes the gold medal. The instructions were most likely written by someone who has done a 100 installs. Diagrams are impossible to follow. Plan on 5-6 hrs to trouble shoot and install. And its a 2-person job to shave 1-2 hrs off install. The most important part of the install is locking down the cover just behind the cab, so it can't fly away and become a serious road hazard. The aluminum rails are impossible to get level to the bed (too thin and they deform under weight of the cover), especially when its in the rolled up position, to lock it in, So you have to McGyver it by using weights at the cab end, and loosening the hex screws for better grab, and partially unrolling the cover by a 1/3, and crawl underneath. I also adjusted the depth of locking sliders at the cab end to be extra secure. None of those hints are in the instructions! A video would be nice. Again, have a first timer write your install instructions.And it takes 2 people to use it. The slats are a very, very tight fit between the rails, so you need to unwind both sides equally at same time, so the locking slots can lock under the rail at the back end. If you unroll on one side only, it won't unroll exactly square, and then won't lock at the back gate (either the left or the right side slats will ride up over the rail). If you unroll yourself, you need to do about 1/3 each side, swap sides, and repeat. And them its and extra fist pump to get them spring tabs to click into the rails and lock.It sure looks nice though, and seems pretty secure for preventing people getting into the box. And it seems hardy enough to support a good load of snow on it. More aerodynamic for better mileage? Perhaps, but it weighs about 85 lbs, so likely a wash at best, having to lug the extra weight around all the time.For $1,600 plus tax, the value isn't there for something that doesn't work anywhere near as simple as a trunk lid. I wouldn't repeat the purchase. I would go soft cover for 1/5 the price, or tri-fold installed by a dealer. This install is likely to remain in place most of the time with very few times rolling it up. And although you can remove the cover entirely, its unlikely I'll ever do that with the hassle of locking it in place again. It will be rolled up only when I need access to the box.2 stars, that could have been 3 if they had better instructions. ( I was really close to returning it, it was that frustrating).

I always seem to come to this cover. They fit good with a quick easy installation. The vinyl is tough and lasts a long time.

Works just as advertised. I like the low profile look and the heavy duty velcro.

Excelente