TONOR 4-Pack Bilayer Acoustic Panels Large Self-adhesive, 47.2” * 23.6” * 0.72” Adhesive Wall Panel, Large Soundproof Tiles for Echo Absorbtion, Acoustical Barrier of Polyester Fiber, Black

I cannot express how much of a game-changer these acoustic sound blockers have been! I live in an apartment with thin walls, and my next-door neighbor’s loud music and conversations used to drive me crazy. Ever since I installed these panels, my peace and quiet have been restored!Superior Soundproofing & Noise Reduction• The panels effectively absorb sound and block noise from traveling through the walls.• I immediately noticed a huge reduction in outside noise, making my space feel much more private and peaceful.• Even loud voices and bass-heavy music are significantly muffled now.High-Quality Material & Easy Installation• The dense and thick construction makes a noticeable difference compared to cheaper foam panels.• The material does not deteriorate or peel off over time.• Installation was a breeze! I used strong adhesive strips, and they have stayed securely in place.No More Neighbor Problems!Since installing these, I no longer have to deal with my neighbor’s noise, and I can finally enjoy my home without distractions. Whether you’re dealing with loud neighbors, home studios, or echo issues, these are a must-have!Highly recommend for anyone who values peace and quiet!

Oh my God what a great product I live next to a busy highway with an exit ramp so I hear the constant rumble of the cars as well as tractor trailers, air brakes, and Harley Davidson being obnoxious. These have knocked the sound down in my bedroom so well I can actually hear my ears ring if I had to put a percentage on it they reduced the noise by somewhere between 80 to 90% highly recommend and they look really nice

The focus of this sound deadening is to shield from my laundry room. Water filling and then agitating from the washer is significantly reduced. However I should note since this is a typical utility room of an older home it is asymmetrical. I had to fill a 2'x4' hole with Dynamat (hood liner and dynapad). This then is placed on either sides of the hole. On my room side and the utility room side. This material is being placed on my room wall and the utility room. It isn't complete yet and I have other areas that to finish off.So far I have found a significant improvement. At least 50%. But I have other areas where sound my be coming in. What I like about this material is the cost per sq foot seems to be the best for what I have found on AMZN. You should see an improvement from noisy apartment neighbors, or a partner's instrument practice. It won't eliminate it but is will probably just be a comfortable soft background noise.What is also nice is that it "should be" easily removable and "shouldn't" be too damaging to apartment walls and sacrifice a damage deposit. I would use a hair dryer or heat gun and soften the glue to remove.The material is very tough but somewhat easy to cut. It takes some effort but I can cut it with a Swiss Army Knife. I didn't have a utility razor knife on hand. I measure and cut from the flat back side first, which is the easiest.It is also pleasant to look at. the white/offwhite ribbed material would make a room pleasing and not distracting. It seems tough and durable enough that you could tack pictures to the raised ribs. Even small or medium picture frames, but don't quote me on it just yet.They are very good, but not "professional." Meaning for true sound isolation you need a lot of insulation professionally installed.I am very happy so far.I have just finished, or nearly so, my project. I finished what I could on my laundry room side and room side. The Laundry still has an open ceiling and joists to my room though I have stuffed it with material what I could so far . My room side the joists are covered with these panels as is the wall that I described above. I have also covered all but about 2 sq feet near the ceiling on the wall opposite of my furnace.Audibly I can tell a noticeable reduction when running the washer, dryer and furnace at the same time.Accousticly with my PodTrak P4, Shure SM7B and Chaotica cover I just pick up a whisper of all at around 7.25 gain. At 7.5 I see the line on the meter show, so visually it is indicated. at 6.75 or 7 I can just hear it with my JBL Quantum 100 headphones but my volume on the headset is turned up pretty high and so is on my Podtrak. I hear the white noise more noticeably, the shhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh and it just is detectable through the headphones. I would note I can still hear everything in the back ground audibly externally over anything that comes through my headphones.If my gain is set to about 5 I should be able to record anything I need without picking up anything else. But my voice isn't what I would like. I need it just over 5, to at least 6 to be what I desire. Which is right on the threshold of picking up any other noise.So yes these panels will work, and would do well for an apartment. They look sharp and with care can install very nicely. Use a fresh box cutter, measure and cut from the glue/paper side to fit and you will be very happy with these in your apartment or sound/podcast room

These are actually very good value and they do an incredible job reducing sound in my studio

Works well, and easy to install!I installed on my apartment bedroom wall behind my headboard. Now instead of clearly hearing my neighbor snore (I'm moderately worried about his health)- it's a dim muffled noise. His 2:30am dance music on a Tuesday night, sounds further away and is something I can now sleep through.Installing tips- take your time, I rushed on my second row and the lines are off center and once the adhesive hits the wall- it's on there! For the couple edges that refused to stick for no reason- I was easily able to put a couple small nails in to secure it flush to the wall. I had to trim one panel and was able to cut through it fairly easily enough with a Ginzu steak knife (this may speak more about the knife than the panel?), if you're someone with actual tools, it may be even easier for you.

My office is 'modern' meaning concrete floors and glass walls, the echo for typing, talking on the phone and even walking around is horrible. I ordered these along with another sound deadening picture from amazon and they work fantastic at reducing the echo. I didn't do a full wall, just strategically placed around the office and the difference is VERY noticeable. My office neighbors all asked where they came from and will likely order as well.Install is super easy with the self adhesive, no damage or bending to any of the panels, even neutral color, soft to the touch. Love them!

The TONOR Acoustic Panels are fantastic! They are incredibly easy to install, making them perfect for both beginners and professionals. The sleek and modern design adds a polished look to any space while effectively improving sound quality. A great choice for anyone looking to enhance their studio or home setup effortlessly! They also look great as a feature or accent wall with a purpose. Buy these!

Excellent sound absorbing material. Sticks well to walls. Loos very nice as well. Just be sure you use a leveler because you wont get it off - it will rip the paint off the wall and then some! Then again it will not come off - ever :).