QuliMetalFire Burn Pot Replacement Parts for Pit Boss Pro 1150/1600 Pellet Grills, Pit Boss PB1150PS2, PB1150PS3, PB1600PS1 Grills, Upgraded FirePot Accessories with Screws

This has been a good replacement for the original fire pot on my Traeger grill. It is a thicker metal and should last longer than the original fire pot. It was easy to install and fits perfectly.

I had questions regarding the compatibility with the Pro 22 that went unanswered but I was in a pinch and rolled the dice anyway. I am here to tell you that it was a perfect fit with my Traeger 22. I reused the fire rod and screws so I cannot comment on the hardware sent but I was very satisfied with the quality and ease of installation was pretty much plug and play.

Product came packaged well. The screws included do not fit my 2013 Traeger Model: BBQ07C (Costco Specific Lil' Tex). Luckily the factory installed self tapping screws that held down my original fire pot were still serviceable. If in doubt order yourself some new screws, or hit the local hardware store and pick 4 up. The screw designed to secure the hot rod heating element fit well.The steel is comparable to the thickness of the factory fire pot and appeared to be assembled well enough to not warrant any concern. The bung for the hot rod is off-centered unlike the factory unit, but this did not impede installation, nor affect the function of either the fire pot, nor the heating element. The bung for the hot rod did have a slightly larger inner diameter which caused the hot rod to appear crooked once inserted and secured. This also doesn't appear to affect performance or function. The top flange is visibly smaller than the original fire pot, but covers the auger tunnel opening without issue. The holes in the new unit aligned perfectly with the existing holes.The install went quite smooth. I removed the 4 screws and removed the bottom panel under the hopper (be sure to unplug while performing this work. I cut the zip ties to help facilitate removal of the fire pot due to the hot rod cable needing to be extended to pull the original fire pot. After all of the fasteners were removed I rotated the original fire pot counter clock wise about 45 degrees to extract it. I loosened the hot rod retaining screw and slid the hot rod out. I then used 120 grit sand paper to clean up the hot rod just a little, nothing major just a little cleaning. I then inserted the hot rod into the new fire pot ensuring it only protruded past the inner tube by about 1/8-1/4 inch as recommended by Traeger and tightened down the retaining screw. I then installed the new fire pot in the reverse procedure as I had removed it and tightened down the 4 retaining screws. I then installed new zip ties under the hopper to keep the wires from rubbing on the blower fan, and reinstalled the bottom plate. after that I started the unit up as I normally would and let it run for 45 minutes on high similar to the initial break in burn.The new pot worked without any issues, and was easy to install. I will keep an eye on the pot and update this review if I run into any hitches. As of right now I would recommend this product to others who need to replace a worn out or corroded fire pot without breaking the bank.

Absolutely worth the money for this fire pot. Very heavy duty compared to the original. Fits my Pit Boss with no issues. However - the instructions are not the greatest. You Tube is your friend!

The fire pot burned out on my Pit-Boss Lockhart and Pit-Boss sent me the wrong replacements, twice. I gave up and ordered this for the replacement and it fits, almost perfectly. It is about 1/16” too deep but works just fine. Pit-Boss should buy the fire pots from this company for quality assurance. Much longer lifespan expected from stainless steel.

This burn bowl is a perfect fit and is identical to the OEM bowl. Definitely a good replacement option since getting one through pit boss is impossible at the moment.One thing I’ll note is that the screws it comes with don’t work with the 1150S3 so save your original screws. I’m assuming they’re for another model? Otherwise I’m happy with it.

Perfect replacement for my Traeger Pro 34. No problems at all.

Easy to install. I was impressed with the quality and craftsmanship of the product. This $20 part will extend the use of my Traeger grill for many years.

The item was delivered quickly and I must say that I'm very happy with the quality of the item. I was apprehensive because of multiple 1 star reviews stating that their pot is not made from stainless steel and it's magnetic low carbon steel. The first thing I did was put a strong earth magnet to it and I promise you the unit I got is 100% legit stainless steel. Installation was a breeze. As you can see in the photos my old fire pot was decimated. This was installed on a Pitboss 700 series smoker and everything fit perfectly... no modifications necessary. The screws provided fit perfectly. I don't know about Traeger but if you have a Pitboss this is a fantastic upgrade. Cheers.

This was an easy repair and made my grill work like new.My Pitt boss was not getting up to temperature and after a little bit of poking and proding I noticed the burn box was rusting out a bit. The larger openings caused by the rust were not focusing the fan blown air properly causing less than adequate burn and temperatures.Ten minutes to re and re the burn box and my unit works like new!

Replaced the old fire pot in my Pit Boss Austin XL. Exactly the same as the stock one. Temperatures hold much better now.

Good product, easy to install but did not come with ash lifter as shown.

This fire pot was easier to instal than removing the old one.The instruction booklet was straight forward and easy to follow.