LEADTOPS100FT 22 Gauge 22/3 3 Conductor Electrical Wire 3 Core 3x0.3mm² Cable for LED Light, Automotive, Boat Equitment

It's taken me awhile to get round to reviewing this cable, but finally found some time to put it to use.I've a ton of Pixel LED strips in and around the house and finding 3 core cable (DC + and - plus data) is not as easy as it should be. So ordered this cable.It's three core, Red Black and yellow is it's perfect. It's real copper with a tinned outer to protect the copper and works perfectly for my use. Reasonably flexible, not as soft as silicone, but not bad for PVC.

The cable arrived on a reel with a couple of screwless connector blocks which could come in handy. Everything looks as described and I stripped off the tinning just to check the conductors are indeed copper underneath, and they are. The outer insulation reminds me of a girl I once knew - pretty thick, but strips off easily. Not a lot else to say really other than that. Is just what I needed so I'm happy!

This is very good quality cable that despite being frost/waterproof, it is still intended to be used indoors.Main application will be 12v/24v for automobiles with a maximum current rating of just over 6amps. The cable itself can handle a max voltage of 300v.The ends of the cable are "tinned copper" so they are easy to hand and fit into either a plug or a terminal block.The cable is of good quality with a wide temperature range and 10m in length which is more than sufficient for most jobs.

LEADTOPS 33FT 22 Gauge 22/3 3 Conductor Electrical Wire 3 Pin Cable for LED Light, Automotive, Boat ....Ignoring the destroyed condition of the box, this is a small drum of 3 core cable, with red, yellow and black conductors and comes with a couple of 3 way in-line spring connectors. Markings on the cable are ‘AWM 2464 22AWG VW-1 80°C 300V AWM 22AWG I A 80°C 300V FT1’, this breaks down into the following: an AWM-certified cable with model number 2464, 22-gauge conductors (0.23mm), a VW-1 vertical flame resistance rating, a temperature rating of 80°C, a voltage rating of 300 volts, and compliance with the FT1 flame test standard. I could not find any reference to the I & A portion of the marking.The cable is flexible, easy to strip back both outer sheath and conductor insulation, being tinned copper, it is easy to solder and with minimal shrinkage of the insulation. The cores are multi-stranded and coloured red, yellow and black for easy identification. A very useful cable to have for all sorts of projects. Comes with 2 x 3 way inline spring connectors too.

This is suitable for below 12 volt applications with a current of no more than 5 amps, the cable is well insulated and is rather flexible for applications where there will be intended low current draw. perfect for Neopixel strip lights "WS2812" or for installation of low voltage run cabling i.e 5-12 volt caravan usb charge point caravan applications / lighting.The cable is easy to score and peal and the wire is indeed copper.I would however not trust the provided press fit connectors at these are thin copper plated connectors that have the potential to overheat due to a buildup of resistance to current draw, either direct solder, use spade insulated connectors or proper push fit connectors.

Great value wire - used for a 3 wire sensor which makes the job easy.Nice thick outer casing and good quality low resistance wires.Really good spool of wire

I used the cable to complete some LED lights I have. The cable is very flexible and each core thin enough to fit with the LED connectors. I only needed a couple of meters so have plenty spare for the next task. Two jointing cables came with it which I am sure will be very useful. The cable is on a nice roll to keep it safe. All in all a good product.

Haven't used it for anything yet, but at first glance it seems like good quality. After looking at some competitors cables there were reviews saying the inside insulation around the wires is really thin. Pictures in this listing showed it had decent thickness of insulation and after receiving this it was just as I expected. Also the little reel it came on is a nice touch and actually pretty handy. If I need more in the future I'll come back to buy this again. In fact I'm tempted to buy more in different sizes before price skyrockets like everything else I find that is a good deal.

Conforme à la description 👍

Nulla da eccepire. Sono dei semplici cavi che fanno il loro dovere. Lunghezza cavi conforme a quanto dichiarato in descrizione

Fil correct

Ich habe dieses Kabel mit 3x 22AWG (~0,35mm²) verwendet um Sensorleitungen damit anzuschließen. Viele Sensoren, Potentiometer usw. benötigen drei Leitungen. Hier bietet sich so ein Kabel an um nicht 3 einzelne Leitungen ziehen zu müssen. Stattdessen hat man ein unscheinbares schwarzes Kabel. Neben Sensorleitungen eignet es sich ebenfalls für CCT LEDs, also weiße LEDs mit einstellbarer Farbtempertaur. So hat man eine gemeinsame Plusleitung (rot) und ein schwarzes und ein gelbes Kabel für die beiden Farbtemperaturen.

Für den EU Markt sollte bei Kabelstärke, diese immer in mm angegeben werden . Die Angaben auf der Seite des Anbites erfordert Rescherschen im Internet um festzustellen dass das bestellte Kabel für meine Anforderung ev. zu dünn ist . Nicht gut .Dubis