rabbitgoo Blackout Window Film, Sun Heat Blocking Privacy Cover for Glass, Removable Opaque Room Darkening Dark Black Out Window Covers Tint Shades for Home Day Sleep Light Blocker 17.5 x 78.7 Inches

In all honesty I couldn't give it a 4 stars because I was the one that didnt measure my windows and bought the wrong size. What I will say however, it was so easy to cut to size and even easier to install. I just added just a bit of dawn soap to the water like less than a dime drop and sprayed the window down then placed the privacy cover on the window. I love the thickness of film as well as the fact that it blocks the heat. I went with the black out as a double protection; block the light as much as possible where I actually placed it but also privacy as my apartment is not he first floor and my bedroom window is adjacent to the parking lot and my cat loves to go not eh windowsill. (and no, I do not have curtains as I did not want to drill more holes in the wall that I would have to patch when I was moving). I do have blinds but they do let in some light. Will buy again but maybe in a different color for a different room. It looks so good from inside and there is a little contrast when you are outside looking at it.

I recently tried a peel and stick window film, and it worked perfectly for our needs. As a nudist household, we wanted privacy without losing natural light, and this film delivered exactly that. It was easy to apply, stuck well without any bubbling, and can be removed cleanly if needed. The frosted finish gives a soft glow while keeping everything private. Highly recommended for anyone looking for a simple, effective, and non-permanent privacy solution.

It's working great, install was easy, but it was pretty hard to cut even with a fresh utility blade and ended up shrinking very slightly around the edges exposing some gaps.

I read a lot of reviews on these types of films for you window and almost all for Rabbitgoo were positive. Not sure how exactly they would stay on the window without any adhesive, but it has. It was very easy to install and the cutting was easy. I also ordered rabbitgoo's kit with the waterbottle, cutter and squeegee. They helped, however when cutting the excess off around the window, use a credit card. The film has only been up a few days and looks great and gives great privacy while letting light come throug the window. This window gets direct sunlight with hot temperatures and also gets freezing temperatures. We will see how it holds up after a year or so.

Great product, give you a lot of privacy nobody can see through the night when you have your lights on in your living room, easy to install, very durable and the color is perfect.

Update less than 12 hours after application to one window according to directions ... 1/3 of product is no longer stuck to the window. Resulting in removing two stars. Less I can figure out another way to get the product to stick since following the directions hasn’t worked 100%. Wondering if it’s due to having an older 1900’s house. I’m going to try with the replacement windows. Had SO much hope in the product concept. Wish I had a five star experience as other users have! ——— While searching for potential products to obscure views besides frosted paint I searched products such as this. Sometimes I add stuff to my cart. Then, either save for later, stash on a list, delete, or order. Having decided to make space to do the project. Welp, ooopppps! Accidentally pushed the wrong button. Wouldn’t allow me to cancel. Soooo, a couple days later ‘Viola’ two rolls show up. Was gonna wait due to finding out I’d be getting new windows the day I was shopping for something to help with a few windows. Decided there’s ample opportunities to use this is why I kept it. Anyhow, today, upon hanging one panel in a window am posting a review. Pros, Cons, and why the star count. Loss of stars for messy installment necessity. Tips and edges don’t easily remain stuck. Sparse instructions. Support of other reviewers who relate to the struggle with the product and no way to fix it. This review is in your honor and to assist future users. Pros: Obviously, obscures viewing while allowing light into the space desired. Ability to cover multiple standard window sizes. Price comprarable or slightly better than big box stores. Cons: instructions are void details. Instructions with multiple languages is helpful to confusing a lot of nations. If you’re not savvy about the nuances you’ll deal with attempting to install this product you’re gonna get pissed, frustrated, and offer a crappy review if you even bother. Already feeling as though this product has robbed you of your valuable hard earned money, time, and sanity. TIPS: to assist IF the seller adds details to the few current steps. To buyers whom desire the benefit of this product for the ease of receipt from amazon. Recommendations: although most people don’t having Dr Bonner’s soap. My chosen brand for this project. Dawn dish soap would be a better choice. It’s sticker. I’m using it on further installation on other windows. Have a plastic putty knive. It’ll give the best spread. Also, having a 10 inch really does the trick. While spreading the soapy water inside. Having the handle makes for a nice even smooth push, spread, even wider movement then a credit card which frankly is a pain in the butt for the width of this installation. Wider edge = happy user. Have a flat surface to lay the precut product on. Spread the soapy water on the product. Rather than the window. Use a modest amount. You’re gonna need it. Make sure to apply to the textured side. Have paper or regular towel spread along the bottom of the windows. Have extra ready to clean up the mess you will make. A wash cloth works great for this part. Having a clean dry rag to use over the application once you’ve applied, used putty knife, and wipe up the corners will help gently continue to apply pressure to the product. You may, depending on your windows, have edges of the film that simply won’t stay down. I’d suggest, when everything’s dries, adding a little water to some Elmer’s and rub it on the edge with your finger. Then, use the putty knife to push from inside toward out. Use your finger, the clean one, and have a wet rag to wipe your finger of the glue. Plus, you’ll wanna clean away any spill over on the window. Or, it’ll leave that Matt Elmer film. Now, about the putty knife motion. When you apply the product you’ll see lots of inconsistencies between it and the window. Here’s a method for even spreading of the stuff on the product between the window ***Oh yeah, special note, reminder again, use the bumpy side on the product toward the window. Not the slick side.*** While holding the product in place, at the top, start in the middle. Lay the putty knife on the product. Push toward the window edge side down. Then up. The product will move if you need to realign it slightly. Then, putty knife middle to other side.Continue this until you’ve oozed the soap and water out. As though your squeeging water off your windshield. Basically move from middle to edge. Ensure edges still line up. Keep moving soap and water out of the sides. This will also help seal the product to the window. If you did a great job precleaning the window, the now cloud cover should be spotless. If not, quickly peel away. Remove the hair or debris that may be trapped. I’d recommend res-soaping and redoing the process to ensure sticking. By now you’re a pro so no fear you’re screwing up! Just do it! If you have older windows, like me, that haven’t been replaced yet. Razor blade any paint around the edges. Prior to install. If there’s ANY debris, paint, dirt this product won’t stick. Then, use the Elmer’s trick. If you forgot, or don’t care about how you get the edge to stick. I’m not certain how this product holds up in all weather. If it falls off or becomes a problem I’ll update. Four stars ease of use. As far as it obscures the view from people outside. Currently four stars for durability to to edges coming off window refusing to install. Requiring some other means of application. If not updated within the four seasons from now, July 2018 and next year, July 2019 you know it’s working okay for how I need it to. One star for ease of install. Honestly, worst product install due to the instructions I’ve ever had. Given I’ve got decades of tooling and DIY experience this says something. The everyday shopper should have a simple ease of installation. Currently, this is limited. It’s a very helpful product overall for what it’s meant for. No reason we shouldn’t have 4 and 5 stars across the board with a few updates on how to anyone can understand. Sincerely hope this inspires others to make this work for you!

My friend helped me install in my study, as the window leads to a shared pathway on property. I love how I can now leave blinds open and still have privacy from my neighbours walking by. I work from home full time, so this has greatly improved my working space. Before the peel and stick film, I had to close the blinds all day. Now I get natural light. Love the product so much, have even used on upstairs bathroom windows. Recommend two ppl to install, and using low bubble chemical to mix with water. Some ppl use baby shampoo, but I used hyper allergenic shower gel. It has the same effect and the less bubbles means less air bubbles under the film, but still sticks perfectly

The delivery is only one item

Aún me falta poner cortinas a mi habitación pero quería tapar por lo menos la mitad de la puerta y aún así que entrara luz. Me encantó, es súper fácil de usar, solo asegúrense de echarle agua al lado que se le saca el plástico. Entra luz pero ya no se ve para afuera ni para adentro y crea unos destellos lindos. Muy fácil de pegar! Recomendado

I don't write a ton of reviews but I am impressed with this product. As the title says, I was expecting this to be a bit of a hassle to install (which is why I put it off for a while). After measuring, cutting and installing the first one, I did all the rest of my windows fairly quickly. The privacy factor is great, ample sunlight comes through and no more messy, dusty sheer curtains. The fact that you only need water and science to stick this on is fantastic. You can make slight adjustments after putting it on, etc. Cutting off the excess edges was simple, too (helps if you have a square ruler). That said, I just installed them so I'm hoping they hold up over weeks, months and years, winter/summer, etc. We'll see. Overall, I was dreading this a bit, thinking it would be like trying to get the bubbles out of those mobile phone screen protectors, but nope! As long as you have the tools they suggest, this should be no problem. Plus, it won't leave any residue if you choose to remove them later on. Nice!

Love this product! It was super easy to apply, looked great, and worked a treat in keeping the heat out and privacy from neighbours. I bought two more it was so good!