MUYI 5 Kit 3 Pin Way DT Series Connector Gray Receptacle IP67 Waterproof Heavy Duty 14-18 AWG 13 Amps Continuous DT04-3P DT06-3S w/Wedge Lock W3P W3S (5 Kits, 3 Pin)

I use these connectors for any off road lights I install. Weatherproof, easy to install once you have the tools, and lasts forever. I used to just butt splice or use other types of connectors, but these really are the best.Replace the pins it comes with and get the barrel style instead. Totally worth it.

Works great comes apart like it’s supposed to.

These are a traditional "c" crimp connector and not the barrel type connector. Important to know.

Work and fit just like Deutsch or Amphenol but cheap enough that you can feel it. pins still crimped well though

The good are GOOD and the not-so-goods aren't terrible. Quality plastic moldings are good, fit well and look ok. The pin connectors are a bit small, fiddley and lighter weight than I hoped for but should be sufficient for the needs of my Corvette. All in all I would say they are about 2 notches higher in price for what you get. Either better quality metal pins, a few more connectors or lower price point should be considered. Assemble connections carefully and assure these will carry your current requirements. I would not consider these heavy duty, but more like adequate when properly used. I would suggest dielectric silicone compound be used in automotive type applications. Novices would appreciate some instructions and pro's would like better packaging. Light duty low voltage use suggested.

Same as OE quality

Great product so far! Ordered them a little over a month ago... just getting around to using them and realized i didn't get the seal that goes on the male housing. Everything else seems excellent so far!! Great fit and finish! Just wish i had those seals to keep this this water tight as i am using it to power my off-road lighting on my raptor!Seller, if you see this, please contact me so i can see how to get the seals im missing!

I was skeptical of this connector but am pleased to report that it went together and appears to be working perfectly. I had a bad oem connector for my headlights on my motorcycle so I purchased these as a replacement.After removing the old connector and pin terminals I was able to use a standard ratchet dupont crimper for the new terminals and they clipped right into the housing for the new connector. Be aware that the terminals are not actually latched in place until the interior orange or green wedge-shaped piece is pushed into place.Since I only used 5 terminals I shoved some liquid electrical tape in the remaining hole to seal it up. I can't authoritatively comment on the weatherproofness but it seems well sealed.

Excelente calidad del producto y servicio