926-959 Aluminum Engine Oil Cooler with Oil Filter Housing Assembly Fit for 2011-2016 (Black Cap)

This product works so far, just installed it this morning (6/10/23) no leaks great oil pressure and temperature. Will update. Very happy to find an aluminum replacement for a crappy plastic design. Dodge dealership wanted 1500 in parts and labor to do the oil cooler and spark plugs. Did it myself in 3 hours for $120. Highly recommend this part, hopefully it stays that way.

Very well-made aluminum solid product. I installed it myself. The five included bolts, as well as upper and lower intake manifold gaskets seemed a little flimsy. BEWARE: If you are installing this on a 2016 jeep grand Cherokee, then the oil pressure sensor will not line up with what’s in your truck, you will either have to use your old sensor or buy a new one( see picture for details). On the cooler there is an additional sensor above the oil pressure sensor that your 2016 jeep grand Cherokee does not have a plug for, so you can either take it off or keep it on, It will still fit. Also, I would suggest getting the Mopar O-rings because the ones included seems a little thin. I’ve driven about 50 to 60 miles at this point and product seems to be working fine. Before installing open and make sure there are no aluminum shavings in the housing and that there is a filter there. Mechanic wanted to charge me $1100 for this of which the part itself he wanted to charge me $450 and it was the plastic one. Drain the coolant before starting, do a oil change after installing.

So far so good. Install went as i expected, new sensors plugged right in seems to be good quality. WARNING If you purchase the 2011-2016 housing, it will use a filter for a 2014+ if you have a 2013 and older, you must make sure you remember to order or tell who ever is doing your oil change that the filter will be for a 2014+

I installed this on my 2011 dodge grand caravan with 3.6L pentastar engine. I liked that this one was all aluminum and had the sensors already attached. It comes with all the gaskets pre installed and came with new bolts. This has the upgraded oil filter (already installed) from the older 2011-2014 versions. So you will need to get a 2015 oil filter from now on if you install this on a 2011-2014 caravan. Some people said they had the engine light come on as soon as they started up the vehicle after installation saying there was bad communication between the oil pressure or oil temp sensor that come on this unit. I did not have that problem. They worked right away with no problem. Just keep your old unit around until after you install this to make sure. Update:(The oil pressure sensor failed after 1 week. SAVE YOURSELF TIME AMD JUST SWAP THEM OUT!! I took a gamble after reading the reviews and I lost. It took an extra 3 hours and a new 1&1/6” socket to replace. Then you could swap out your old sensors if needed. Some people say that this doesn’t fit because there is a notch protruding on the right side of the assembly looking down on top of it. It does fit but is very close if not barely touching the right inside of the aluminum intake. I installed the coolant hose and plugged in the sensors(2) and lowered it down with the filter housing pointing down first and it squeezed right in. There should be just enough slack on the coolant hose and wires for you to hook those 3 things up before you lower it into place. Make sure to torque it down to 106in/lbs no more. Don’t over tighten. Also never over tighten the oil filter cap. Just barely snug is good enough. Pro tip: You better drain about 1.5-2 gallons of coolant before removing old one and right before you remove the old oil filter housing /oil cooler assembly and take it out you need to have a wet/dry shop vac with a pointy sucker hose ready to go to suck out all the extra coolant and oil that will come pouring out of it into the valley where all the oil and coolant ports are at. Change your oil after installation because some coolant will get in there. Good luck!

All parts fit my 2014 Dodge Journey 3.6 SXT beautifully and installation was a breeze once we got the engine block exposed (thank god for YouTube!) Honestly the quality is the same as buying from a parts store for a much better price. Definitely go with the all aluminium one or else you'll be dealing with another leaky part in a five years time.

My 2012 Chrysler town and country was slowly leaking oil needed this Part but the part store was so expensive with prime was shipped overnight here by 8am Just what I needed Thank you

Is far better than the original plastic cooler that came on my 2015 Charger from the factory.

Honest Review : Very Good Product and Value. I purchased 2 different ones, this one and from another vendor. the other one gets a bad review. Metal chips inside filter housing. not good. With any of these assemblies make sure you take out the oil filter and check for metal chips. This housing had no chips and everything was perfect fit. Electrical plugs were correct fit, the gaskets were better than fel-pro for fit. I ordered fel-pro as a back up from some of the reviews talking about bad gaskets installed. Not the case with this company. I will say both of the 2 housings were identical. except for the chips. I would not waste money on expensive housings they are all same made in china, probably same factory. I give this a 5 star. No installation problems at all. Housing has been in vehicle for about 1 month and no leaks. For reference it was installed in a 2014 jeep V6. Do not buy a plastic replacement housing, spend the little extra and get the metal housing. To big of a job to skimp on plastic vs metal. They never should of made these from plastic to much heat makes it brittle and stress on oil filter neck, poor engineering. Local part stores were crazy expensive for similar part. Hope this helps.

Un mes que lo puse y sin problemas, cumple con las espectativas