Creality Capricorn Tubing Capricorn Premium XS Bowden for 1.75mm Filament with PC4-M6 and PC4-M10 Pneumatic Fitting and Teflon Tube Cutter for All of the 3D Printer

The bowden tube on my Ender 3 Max got burned at the hot end and damaged when I tried to remove it, so I bought this kit. It came with a spare pneumatic fittings which was handy because one of mine was a bit chewed up for some reason. The extra bed springs were a bit random but they do seem to be the same as the springs on the extruder so I guess they may come in handy for something! The cutter supplied does its job well and with a little care you can good, straight cuts that do not squish the tube,The kit has enough for a little over 2 replacement bowden tubes, so I cut mine slightly longer than the original, so it can be trimmed if the hot end gets burned and I'll still have a spare tube if I need it.Since replacing the bowden tube and fitting a new nozzle at the same time I am getting much better prints with fewer extrusion problems and extruder slippage. This is partly due to the new nozzle, but I think the bowden tube has helped because the surface finish is better than it was with the original tubing when I first got the printer.

Great price for Capricorn tube with the connection a bonus very happy

Just getting into 3d printing. Got these as was upgrading to a dual-gear extruder. The tubing has enough for two replacements. The cutting tool is brilliant for such a simple tool. Being a nooby, I've nearly used all my nozzles up. Will be getting more Creality nozzles soon. Nothing wrong with them, just stupid me continually ending up with blocked nozzles.

Perfect

This was purchased as I was having issues with the Bowden tube and thought if I was upgrading the tubing why not pick up a few other items at the same time. So all items other than the Bowden pneumatic connector (extruder end) have been fitted. For reference the items were used on an Ender3 V2 NEO. The extruder plate has a smooth bore so the the threaded pneumatic valve could not be fitted. The hot end valve was an easy replacement and does it's job.I haven't noticed the springs make a significant difference, the printer gets moved about more than it should and every time the bed needs tramming.The tubing has been fine and again, I haven't really noticed a significant improvement in functionality.The pipe cutter was useful in assuring a 90 degree cutThe 0.4mm nozzles are pretty much standard mk8 nozzles. These must be cheap but I haven't noticed them being any worse than the Creality supplied ones. My printer pretty much runs 24/7 and these last about as long Creality supplied ones. Although I have now swapped to 0.6mm nozzles for most prints.

The kit is very good value with not only the Capricorn tubing but contains connectors and a cutting tool. All have been used successfully and have not had any failures to date.Highly recommend that you upgrade your Bowden ptfe tubing and this kit will allow you to do that very successfully.

Arrived quickly.Works OkIt would be nicer to have a see-through tube in order to see where the filament is

This item was purchased and fitted with ease and works like a dream, the only issue I found were that the springs are shorter than the stock Ender 6 springs but the bowden tube and the bowden cutter are a very valuable asset to my 3d printer. Great buy and delivery time was really quick

No duden en comprarlo mejora muchísimo las impresora 3d

Ensemble bien pratique je recommande

Perfecto

Che dire, kit perfetto per la ender 3 pro.

Tutto perfetto, PTFE capricorn con tronchese una garanzia e molle perfette