1/2" Air Line Pneumatic Tubing For Air Suspension Air Brake System Or Fluid Transfer Nylon Tubing Air Ride Hose Train/air Horn Systems (10 Meter 32.8 Feet 1/2 Inch Air Hose)

I used this to install an air compressor and tank on my friends offroad vehicle and it is holding up very well. I have plenty left over and will likely use it in my shop.

Used it to rebuild the fuel line on my F250 diesel truck. Worked perfectly! A 3/8” brass barbed fitting fits perfectly inside

This worked great on my Onboard Air install on my Mercedes Sprinter 4x4. The outer diameter is perfect and fits the "push" type fittings without leaking. Because this is a more heavy duty Air line, the wall is thicker than standard air line and needs to be accounted for then attaching to fittings that use the inner diameter. I heated the tubing gently before seating it over a fitting barb. This made it more pliable and easier to fit over the barb. I then screwed the outside fitting over the tube while it was still warm. This made a very secure and leak free junction.

It does what it is intended for

So far works great. Using to hook shop air reels far easier than using pipe all my Main lines are 1” pipe So using flexible tubing makes this project way easier

Tubing was used for air horn, I had to file down the ID to fit coupler.

Hasta ahora cumple con las espectativas. Mucho más económico que comprar en el dealer

This is not 1/2 in and will not work for 1/2 in applications. It is miss advertised