Steel/Plastic Pegboard Mounting & Spacer Kit for DuraBoard or 1/8 in. and 1/4 in. Pegboard, 15 Sets

Why 1-star?1) Lack of Quality Control - most people can't do anything with a screwhead that's filled in, thus preventing a screwdriver or bit from actually fitting in it, so that it can be screwed into the wall.2) Either Lack of Common Sense, Stupidity or Down Right Intentional Greed - the product packaging shows the most typical pegboard size and an 8-set layout for using the hangers. Of course, the pegboards are most typically (based on looking through thousands of online ads) sold as a set of two, including the Triton products.The 8-set layout not only makes sense when you look at it, but it also feels right when you install it. It keeps the board level; prevents sagging or bubbling in the center of the board.So, of course, with such a great 8-set recommendation AND a two-panel set for sale, you'd expect Triton to sell a 16-set pegboard hanger product, right??? Of course you would, because that makes sense.But, if you're too young to remember when companies did the right thing, used common sense and actually thought about what they were doing and about their customers, then you probably did NOT expect a 16-set kit... and you'd be correct!!They sell a 15-set kit, which leaves you either one set short, when hanging their two-panel pegboard kit, OR purchasing a second kit.... Or, doing what most of us will do, which is go without a set and deal with a soft spot under the board as we set it up and feel it flex when we remove and return tools.The other thing most of us will do? Tell everyone about our less-than-acceptable experience with this company and how they suggest using 8-sets/panel and sell two-panel kits, but only a 15-set hanger kit, instead of the 16 that they're suggesting you use.The math doesn't add up, so clearly they don't do math and don't care what customers think.Products, for me, either do what they're suppose to do or they don't; generally meaning they're either a 1-star to warn people of the pitfalls, or 5-stars because they worked just fine, at least for me.I started off with 15 when I needed 16, and then had screws that could not be screwed into the wall.Fortunately, I have a Screw Removal Tool, which is nothing more than a harder metal screwdriver, that's meant to be driven into a screw so that you can turn the screw to remove it; most people do not. So, I might luck out and manage to make use of the bad screws, but there's no guarantee.When you make a purchase, you expect everything to arrive, intact and ready to be put into service. The last thing you want is delays because you're short something, something is broken or you have to return something.Quite honestly, once you've started hanging your panels and you're halfway done, you're not going to remove everything, return it for an exchange, and delay everything for a week or longer.Sorry, but there's no 5-star it any-star reward from me; not when a company can't even manage the simplest of things.My time matters AND SO DOES YOURS!!So hopefully, you'll plan ahead and purchase extra and return what you don't use... Or just find a different company that sells enough to get the job done right.

This is the quickest and most consistent way I've found to mount pegboard, hands-down. No need to locate studs or frame out 1x2 boards - none of that. Just space them out properly (e.g., every 16-24 inches), drill your pilot holes if you're using the anchors, pre-set these spacers on the pegboard (mark on the pegboard where you made your pilot holes/anchors when you're drilling them or you'll have a heck of a time finding the holes later :)) and hang the board, it's really that easy.My only complaint is consistent with other reviewers in that they provide 15 of these spacers to a rather pricey (for what you get) package. To hang two 32x48 inch boards I needed 18 of them - of course. I could have gone with 16 just fine but either way I was stuck ordering two packs. I think they should offer 12, 16 and 24 count packs rather than FIFTEEN. Obviously a marketing ploy but oh well, I'll still say it was totally worth having to buy two packs :) I'll use the remaining ones eventually now that I know how great the work.

Makes hanging pegboard easy, everything needed is included. I used 2 kits for 4x8 pegboard.I put pegboard where I wanted it against drywall and drew circles through holes with pencil on drywall. Then drilled holes and installed plastic wall anchors. Then I used blue painter’s tape to secure metal spacers against drywall at each hole. You don’t see blue tape after you hang pegboard. Held pegboard up and installed screws through pegboard. Easy and solid install!

Pros: Screws and wall anchors are larger than they need to be. Round standoffs are easy to handle when mountig peg board.Cons: Stand offs not deep enough for use with larger pegs (larger pegs insert themselves too deeply into the back of the peg board).Recommended for SMALL peg hooks ONLY.

We used these to hang pegboard for our grandson's nerf gun wall. The finished product turned out great, with a very sturdy support and room for pegs to go in and not damage the wall. Our only issue was the plastic grommets. It took all 15 to mount 8 screws. They are the only cheap part of the product, and cracked or broke when trying to install. Never had this much problem with a set in previous projects we have done. So if you need to use all the mounts, have extra grommets just in case.

I bought these because the first pegboard we installed ended with too small a gap in someplaces between it and the drywall. These have more contact area and don't sink as easily so they stay on top of the drywall without piercing it. I didn't use the screws or plastic parts provided so I cannot say how well thosevwork. I drilled into studs where possible and used pop-toggles where no stud was available. I also bought hex-head screws and used my battery-operated drill to screw them in

Easy to use, but it should definitely come in a set of 16, not 15!!! Seems to be a scam to purchase more boxes. I put up 4 peg boards (Triton Duraboard - recommend). Needed 16 sets, so had to order 2 boxes. The screws are a very tight fit with 1/8" pegboard. Some people may have difficulty inserting & beginning to turn screws. Spacing between wall & pegboard is just right. Using to hold office supplies & children's craft items. Nothing to heavy, so no issue.

I wish I knew about this product sooner! I had been looking at cute pegboards for a while. I could not figure out why they were so expensive! I figured out it is MUCH cheaper and preferable to buy a pegboard at a home improvement store and jazz it up yourself BUT I had not thoroughly thought out the proper mounting process. This product is a MUST HAVE! I love it. Easy to use and works perfectly.

These spacers were a great alternative to building a frame. I was able to install a pegboard, by myself, in under 30 minutes. The package has an easy to follow diagram which shows spacer placement for optimal stability.

Works perfectly, used to mount a 4x8 foot pegboard only enough for the one board had to order another set but works as described eliminated need for wood framing behind pegboard.

I loved these and it made it easy for me to put up my peg boards in my craft room.

Does the job of securing pegboards perfectly!

Worked as described. Has instructions on the back to show to how mount but was definitely a two person job.