A2212 2200kv Motor Specification: KV: 2200 Ri(M Ω): 0.033 Battery: 2-3Li-Po Max Power: 342W Test Prop: 7x3/7x4 30A Brushless ESC Specification: BEC: 3A Constant Current: 30A. Max Current: 45A (less than 12s). Low-voltage Cutoff: Auto detect. Input: 2-3 LiPo or 5/10 NiMH. Package Included: 1 X A2212 2200kv Brushless Motor 1 X 30A Brushless ESC 1 x Prop adapter 1 x Mount 4 x Screws Attension: when first time to use this ESC and motor replacement or you are not skillful or professional to play RC Plane Quadcopter Helicopter , Plese follow these steps to set your throttle stroke calibration.otherwise incorrect operating will cause ESC hot ,smoke or burnHow to set Throttle stroke calibration: 1.Connect the ESC with motor ,another end connect with receiver. 2.Turn on the remote controller and push the throttle to the highest point 3.Plug the ESC into batteries 4.There has double click sound (the highest point of the throttle confirm) 5.After get the click sound take the throttle stick to the lowest point 6.Confirm the three click sound that means OK Note: The three lines of the brushless ESC can be connected at will. If the steering is not correct, you can adjust any two of them.
V**E
needs soldering and prop not easy
disnt like the fact that I had to solder the motor wires. I also had many problems trying to get a prop to fit. ended up trashing a plane in the frustration.
F**B
Quality Product
As weight is and important issue I found the power weight ratio very good
K**D
so good i had to order more
my husband says these are really good value and after ordering one we ordered 2 more
D**E
magic bit of kit
Works perfectly well pleased
P**C
Connectors missing and the esc fried itself
The esc arrived without any of the connectors that were shown in the pictures (I had to add my own to be able to use it). On my first use, the motor started off great for about 3 seconds until the esc completely fried itself resulting in lots of smoke.
Trustpilot
2 weeks ago
1 month ago