Starkey ProductsFog Light Wiring Adapters H16 to Deutsch Set - Fits 2504, 5202, 9009 and PSX24W Bulb Connectors

I swapped bumpers and needed to wire in a set of Rigid SAE Fog lights. I wanted to keep the wiring as factory as possible, by using these adapters it allowed me to retain the stock behavior out of the fog lights without adding switches or relays to the vehicle. Very happy so far.I did have to switch the polarity of the plug to work, but the included instructions covered it well, and was a painless process.

Bought these H16 to DT adapter harness to hook a set of Auxbeam 3" pod leds i bought from Amazon as well that are using the DT connector to my Smittybilt MOD front bumper.The bumper comes with a spot to mount a set of 2 lights, and in this case there is no provision for the factory lights sop i bougt a set of pod leds and i wanted to use the factory Fog switch/harness from my Jeep to power the leds. Came out great, i had to revert the polarity of the wires in the Adapter DT connector as show in the instructions that come with the H16 to DT adapter. (Ty so much for including that guys). I'm adding a picture with one of the adapters and the instructions on how to change the polarity that came in the box). Super easy to do and after doing so my factory Jeep fog switch is controlling my Auxbeam leds. Don't have capacitors or anti-flickr or anything other than the adapter hooked up to my factory Jeep harness and the Auxbeam leds.

Tried to adapt some Rigid cubes to the fog lamp plugs on my 2015 Jeep Wrangler. They plug in, but do not work. I tested the pins on the factory harness and got voltage, plugged in the adapter cable and there's nothing. Theres not even continuity on either wire. Perhaps they're meant for something else, but they certainly do not work on a Wrangler.

Just installed these last night.They are very hard to get them to clip to the stock harness in my truck.And are wired backwards. I had to cut them in half and then flip the wires so my LED lights would work.Not really impressed for the price.They will work fine as long as you are not using LEDs tho. But if you are you will have to do what I did.

I bought these to convert my factory fog lights to a set of Rigid fog lights without having to cut and splice. These are not the Toyota (Japanese Type 2) style H16 plugs. They are the original (American) H16/5202 socket. The Toyota style from the factory are a oblong oval shape with a bar/divider in the middle. These H16/5202 are rectangle with no divider. In the picture you can see a factory H16 Toyota Tundra fog light bulb and on the right is the 5202 adapter that I received in the mail.Update: 2/11/2016I guess the seller/manufacture of these is under the impression that I made a incorrect product review and that Toyota mislabeled their connectors and bulbs. Therefor misleading everyone on why to stay away from these and buy other "incorrect items". So here are some more pictures to further explain how and why these are different.1st picture: Toyota factory fog light bulb and Starkey's 5202 (H16) connector.2nd picture: Stamping on factory equipped fog lights that came with my 2015 Tundra. According to Starkey's email, Toyota mislabeled this.3rd picture: Toyota factory H16 bulb and H16 male connector. Notice the center slot and ridge in the center of each item. Notice they are roughly 2/3rds the length of each one. Starkey also states Toyota mislabeled the connectors as well.4th picture: Toyota factory fog light bulb and H11's male and female connectors. Notice on the H11's how the center ridge and slot are only roughly 2mm's long. Next to them is a factory equipped H16 fog light bulb, notice again the center ridge. See how much bigger it is then the H11's center slot or dimple. They simple will not fit together without modification.It should be noted that some H11 female connectors will fit on a Toyota H16(v2) factory male connectors. As the slot and ridges typically do not matter because of the opposite reasons stated above.

worked perfect for my 2015 GMC Sierra 1500. ignore the negative reviews from the Toyota people.

These are perfect for a 2015 gmc sierra. I changed out the stock fog lights with the rigid industries d2 lights and there bracket adapters. It came with a wiring harness which I wired up but I really wish they would have included this adapter with the kit instead it would have made it so much simpler. Sorry to all the Toyota guys who are giving this a poor review because they have no clue what there stock plug in looked like.

what everyone with a new jeep needs when replacing factory bumpers with aftermarket items.