Spec- Hardware: V 6.6- Firmware: Latest firmware version- Voltage: 8V - 60V (Safe for 3S to 12S LiPo)- Voltage spikes may not exceed 60V- Current: Continuous 60A, Instantaneous current 150A. Values depend on the temperature and air circulation around the device- 5V 1.5A output for external electronics- 3.3V 1A output for external electronics- Modes: DC, BLDC, FOC (sinusoidal)- Supported sensors: ABI, HALL, AS5047- include Anti-spark switch(Reminds : the LED button is defaultly inserted in the switch in shipping status, DO NOT power on switch without the LED button connected.)- include Heatsink-Eprm:150000The shipping package contains: 1*FSECS6.6 + Heatsink1* Micro USB1* VESC Sensor Wire1* PPM cable 1*ManualFeatures- Measure current and voltage of all phases- Regenerative braking- Traction control (single and double settings)- Sensor or sensorless operation + hybrid mode- Configurable RPM, Current, Voltage and Power Limits- Input source: PPM, simulation, NRF Nyko Kama Nunchuck- Communication ports: USB, CAN, UART, NRF, Bluetooth- Throttle curves and ramps for all input sources- Separate acceleration and brake throttle curves- Seamless four-quadrant operation- Motor speed, ampere hours, watt hour count- Instant data analysis and reading via communication port - Adjustable different protections:- Low input voltage - High input voltage - High motor current - High input current - High regenerative braking current (separate limit of motor and input) - High speed (separate limit in each direction).- Over temperature (MOSFET and motor)
S**H
Works great!
This uses vesc 6 architecture. Supports up to 12s lipos. Very easy to tune. I also added bluetooth adapter so i can program and get real time data on my phone. I did add heat sink but probably not even needed. Had issues with the first one but Amazon sorted it out no problems. For the price you can't beat it. Very impressed!
C**E
Great controller, easy to setup and program.
Great product to power an electric go kart for my son. Easy to program and set up with the included usb cable and manual. I don’t have much experience with these types of units but would recommend if your looking for an off the self brushless controller. Paired it with a 12S-4P LIPO and a 6387 brushless motor.
D**S
Quality product with easy setup.
Easy setup using vesc tool wizards. Happy with the results so far. Moving to this from a Turnigy and love the additional features available.
A**R
No cutouts, smooth, reliable
Works well in my 6S Electric Skateboard, definitely worth the price for the VESC 6 architecture
A**R
Good for the price.
Seems well made, some of the solder connections could be a little better but shouldn't be an issue.
C**S
Smooth
After using many 4.12 hardware, this has been a nice upgrade
Trustpilot
3 weeks ago
2 weeks ago