Dark GREY Dishwasher Rack Coating/Glue w/25 caps by Uber Goop

Dishwasher rack was rusting on a couple tips and in several spots on the longer supports. Had to take a grinder to take off the rust and then Uber-gooped the spots. It stinks, so use it in the garage or outdoors and well-ventilated! Dries fairly quickly and is dishwasher safe in a short time. It is really easy to put on, the bottle works like nail polish, with a brush at the end of a stem on the cap. I used a couple of the included tips and they look great! It's been quite a while now and many, many washes, but there has been no further deterioration of the rack. This is a MUCH cheaper alternative than buying an entirely new rack.

My dishwasher rack had rust in its joints even though I allow it to breathe after every wash. This product doesn’t match the color grey well but if you put a couple of coats then it seals okay. I have had to occasionally apply every month to a couple of spots. This is my second time buying.

Works great

After noticing rust on my dishes I found out my rack has some crazy rusted areas. Some which have opened up the original coating. I sanded the areas and applied the product. It goes on easily, but does get sticky in the bottle after being open for a bit. Very much like old nail polish consistency, but a little more rubbery. The smell is strong so I would suggest using it in a well ventilated area. From the areas that have dried it goes on with the same texture and feel of the original dishwasher pieces. The color of the liquid though is a little darker grey than the rack. The end caps are very helpful as well for sealing some of the more severe rusting spots. Seems like it'll last so I'm excited to see how long it'll solve my problem. Fingers crossed that it's for a long while.

Seems to be OK in application. I let dry for 24 hours before using dishwasher. I cannot comment on longevity of touchup repairs.

This is one of those products that can extend the life of your dishwasher. I have an Asko dish washer and in a number of places the plastic coating on the rack has begun to rust. I imagine this was probably a factory defect where the coating was to thin. The most difficult thing in this process to to remove the rust down to the metal. This was done using a wire wheel on a dremel moto tool. I then cleaned the surface with rubbing alcohol and applied the Goop product. Keep the brush clean and free of hardening material and keep your thumb on the top of the bottle (as suggested in the instructions. Initially apply a thin coat overlaping the old coating the apply a second coat a day later. Let try for another day an you will have a hard coating that looks much better and seals the metal. Product seems to hold up well. I will update this review in 6 months to reflect how well it lasts.

I had a rubberized tine break off in my overpriced German dishwasher that begins with a "B." That started rusting pretty quickly, of course. Once I bought the goop, I sawed off the what was left of the tine, and sanded down the metal at the nub to get rid of rust, and then coated it with this goop. I did two coats, after letting the first dry for a few hours. That was about 3 weeks ago, and so far all is well - no new rust. My only gripe is that there is a LOT of this stuff, and from the instructions it appears it won't last long once opened Also, it came with a bunch of rubber tips I didn't need. I probably could have spend more time researching, and maybe found a smaller bottle of the goop with no rubber tips, so that's probably more on me than on the seller or the manufacturer. Overall, recommended.

I repaired my Frigidaire dishwasher rack with this almost 2 months ago. I had several bad tines that I used the caps on and a couple of areas I had to just file clean and paint with the goop. I put on 3 coats on the painted areas. So far everything is staying repaired and I run the dishwasher every couple of days. Great product! I did file or cut off all the rust, and let everything dry before and after the repair as per the directions. You do want to make sure to cover areas under your dishrack while working on it. Drips do not come off of other surfaces.