PegatankeTransparent 2 Part Epoxy Resin | Professional Cold Weld Adhesive | High Strength Metal Glue for Fuel Tanks | General Repair & Plastic | High Temperature Epoxy for Welding Bonds (1.08 oz)

Es un excelente producto … lo recomiendo… lo utilice para reparar un tanque de antifreeze!! Quedó muy bueno …. 100 por ciento garantizado !!

Work fast and easy to use!!

The media could not be loaded.  Perfecto 5 estrellas

The product is excellent

PEGA CASI TODO 95% PERO EN GENERAL MUY BUENO

Pegatanke Steel, Pegatanke Clear, the original J-B Weld epoxy, and J-B MarineWeld Gray were used to glue screws to the sanded and degreased bottom of an Altoid tin. The curing time for each was at least 3 days at room temperature.The tin was baked several times in an infrared toaster oven set to 500 deg. F. The durations of the sessions were 0.5 minutes, 1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, and 20 minutes.After the 2-minute session, the hold of the Pegatanke Clear on the tin was broken; the screw was still standing, but it was no longer attached.After the 5-minute session, the Pegatanke Clear had turned brown and was beginning to melt. When the J-B Weld Original screw was gently tapped with a screwdriver, it came loose.So those two screws were removed from the oven.After the 10-minute session, both of the remaining screws were still rather firmly attached (gentle tapping didn't dislodge them). However, I was able to crumble some of the Pegatanke Steel with the tip of the screwdriver.After the 15-minute session, I was barely able to crumble a bit of the MarineWeld with the screwdriver. Both screws were still attached and withstood gentle tapping.For the 20-minute session, I moved the tin closer to the overhead infrared bulb. Afterward, the process of crumbling some of the softened excess Pegatanke with the screwdriver caused the screw to come loose. It was more difficult to crumble the MarineWeld; tapping its screw caused it to break loose.The ranking from most to least heat-resistant:J-B MarineWeld GrayPegatanke SteelJ-B Weld original epoxyPegatanke ClearIn my opinion, the claims by the manufacturer for the heat-resistance of the Pegatanke epoxies have no basis in reality.

Lo compre para unir plastico y no cumple con lo que dice hay mejores en el mercado

hace el trabajo, pegar y pegar fuerte

Me gusta mucho

Es buen material calidad precio y la atencion al cliente perfecta

The media could not be loaded.  El producto he tenido ocasión de emplearlo para solucionar un problema de pérdida con un radiador, para eso no lo aconsejo es caro y como a mi hay muchas probabilidades de que no resuelva rotura/s de forma adecuada.Pero si puedo decir que en situaciones menos complicadas, el producto como adhesivo soldador es excelente con diferencia muy por encima de todos los que existen en el mercado, ya que lo he tenido (lo he devuelto porque lo compre para un radiador y para eso no me ha sido útil, he tenido que sustituirlo por uno nuevo), probado con soplete y haciendo soldadura en frío la resistencia es superior a los propios materiales que pueda unir, incluso acero soporta presiones de cientos de kilos y tensiones también, temperaturas? Le aplique un aparato que sirve para fundir oro, y resistió de forma increíble antes de que lógicamente se degradase.Repito muy recomendable para otras cosas que no sean radiadores, en YouTube hay vídeos que muestran reparaciones y no advierten en qué casos resuelve el problema y en qué casos no es recomendable.

Pega bien pero viene menos de la mitad en cada bote por lo tanto no merece la pena comprarlo es un robo