🔋 Power Up Your Projects with Confidence!
The Akozon Converter Module is a versatile DC-DC step-down power supply that efficiently converts 12V to 3.3V, 5V, or maintains 12V output. Designed for ease of use, it features multiple input/output pins and a power indicator light, making it ideal for various electronic projects. With a focus on quality and reliability, Akozon ensures customer satisfaction with every purchase.
| Specification met | UP TO |
| Item weight | 0.01 Kilograms |
| UPC | 798382533512 |
| Manufacturer | Akozon |
| Part number | Akozonk6a2mt0gp8 |
| Item Weight | 10 g |
| Item model number | Akozonk6a2mt0gp8 |
| Colour | Red |
| Item Package Quantity | 1 |
| Special Features | Indicator Light |
| Included components | inc |
| Batteries included? | No |
| Batteries Required? | No |
G**7
Multiple voltages.
This was ideal board for sending out multiple voltages out to different devuces.
M**S
Steady 5V but can't supply enough current for more than powering the Audrino.
Bought the voltage convertor to lower 12V to 5V which would be suitable to power an Audrino Nano. I intended to use the extra output pins to supply a common input voltage to power a small set of optical relays, the original 12V supply being used for the common output from the relay. The Audrino would be used to send an activation signal to the optical relay to switch. - So I intended to use it to 'split' a 5V supply from the 12V battery to power the microprocessor as well as the optical part of the relays.The Akozon does produce a very stable 5V from a 12V input (battery), however it seems to max out at a current of around 0.13amps. My project can successfully run from a USB supply, but once connected to the Akozon the draw from the Audrino Nano and the relay bank is just too much for the board to handle. The result was a heavy fluctuation in voltage from 4.60V to 5.32V - which produces a low that is more than my optical relays can operate. (ultimately it flicks the relay input circuit on and off rapidly with the Audrino resetting continuously).To test further, the Akozon will power the Audrino Nano perfectly fine with a nice stable supply, it'll cope with a small LCD 128x32 display added or a small tone generator - but adding more than this and it starts to run into issues of too low current resulting in a heavy and rapid voltage fluctuation across the output terminals.Buy it to power the microprocessor, but for best use power all ancillaries from another power supply.
A**.
Use multimeter on output
12v at 500ma input, 3.3 ok 5v output was 11.6v. I input 5v & got 3.28v which will do for 3.2v led, & 4.8v.
N**N
Great little unit
Just what I needed, 12v, 5v and 3v output from a 12v input, supper small, manual switch and led .
C**N
La sortie 5V ne fonctionne pas
La sortie 3,3V semble fonctionner normalement, mais la sortie 5,5V dont j'avais besoin renvoie le +12V d'entrée.
F**.
Ottima
Questo piccolo modulo di alimentazione è perfetto per poter alimentare direttamente tutte le varie schede con esp 8266, la tendione in uscita differisce di +/- 0.05v, quindi lo ritengo sufficientemente "preciso" per un utilizzo su breadbord, con magari un'alimentatore o una batteria da 9v, per l'eventuale uso su pcb, magari è meglio costruirselo da soli, anche se già questo componente ha delle dimensioni piuttosto contenute
G**O
3.3 Voltage Regulator burned my device
Was using the 5V output to power a microcontroller, wanted to switch to 3.3 Volts since the microcontroller can handle lower voltage. When doing the connection I could tell inmediately something went wrong, powered everything off, then I measured the voltage in the 3.3 output without any load and it read 11V (the DC input voltage). This cheap china 'thing' cost me a lot of time and money. Don't recommend at all, buy a reliable power supply unit.
M**O
Prodotto Pessimo
Ho acquistato questo prodotto per usare l'uscita 3.3V per alimentare un ESP8266 e quella 5V per un relay.Appena l'ho collegato, l'ESP8266 si è bruciato. Controllando le tensioni ho scoperto che al posto della 3.3V mi data 12V (tensione di ingresso). Dovrei chiedere a questa azienda anche il rimborso del ESP01 danneggiato!!! Restituito a tempo di record!
Trustpilot
2 weeks ago
5 days ago