---
product_id: 514649383
title: "Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)"
brand: "teyleten robot"
price: "€ 54.90"
currency: EUR
in_stock: true
url: https://www.desertcart.gr/products/514649383-teyleten-robot-dc-1-channel-optocoupler-3v-3-3v-relay
store_origin: GR
region: Greece
---

# 10A high load capacity Optocoupler isolation for interference-free control Sub-20ms ultra-fast response Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)

**Brand:** teyleten robot
**Price:** € 54.90
**Availability:** ✅ In Stock

## Summary

> ⚡ Control with Confidence: Power, Precision, and Protection in One Module

## Quick Answers

- **What is this?** Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5) by teyleten robot
- **How much does it cost?** € 54.90 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.gr](https://www.desertcart.gr/products/514649383-teyleten-robot-dc-1-channel-optocoupler-3v-3-3v-relay)

## Best For

- teyleten robot enthusiasts

## Why This Product

- Trusted teyleten robot brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Powerhouse Switching:** Handles up to 10A at 250VAC/30VDC for robust device control
- • **Durability That Lasts:** Rated for 100,000+ relay cycles—built for relentless performance
- • **Lightning-Fast Response:** Activates in under 20 milliseconds to keep your projects snappy
- • **Plug & Play Convenience:** Crimp terminals and mounting holes for effortless, secure installation
- • **Interference-Proof Design:** Photoelectric isolation ensures rock-solid signal integrity

## Overview

The Teyleten Robot DC 1 Channel Optocoupler Relay Module is a compact, high-performance control board designed for Arduino and similar microcontrollers. Operating at 3V/3.3V, it supports switching loads up to 10A at 250VAC or 30VDC. Featuring optocoupler isolation, it guarantees interference-free operation with a rapid response time under 20ms. Built for durability with over 100,000 relay cycles and equipped with secure crimp terminals and mounting holes, this module is ideal for professional-grade DIY electronics and automation projects.

## Description

Description - Size: 70mm X17mm X20mm (LxWxH) - Main chip: EL817, SRD-DC03V-SL-C - Work voltage: DC 3V/3.3V - Control 10A 250VAC, 10A 30VDC load Features - Instructions with the signal output; - Signal input port can connect microcontroller IO port, high level signal - Double power selection design anti-interference ability is strong, photoelectric isolation protection of high reliability - Current wide detection range:DC0-25V input - A diode current protection - Response time is less than 20 milliseconds - Relay long life can absorb 100000 times continuously - External connection use spinning crimping terminal, make connection firmer - With fixed installation hole, convenient installation

## Features

- Original Songle Relay
- 30VDC 250VAC Load：The power switch is compatible with 10A 250VAC and 10A 30VDC load.
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.

## Technical Specifications

| Specification | Value |
|---------------|-------|
| Connector Type | Crimp |
| Contact Material | Silver |
| Contact Type | Normally Open |
| Current Rating | 10 Amps |
| Mounting Type | Screw Mount |
| Brand | Teyleten Robot |
| Operation Mode | Manual |
| Coil Voltage | 3 Volts |
| Contact Current Rating | 10 Amps |
| Maximum Switching Current | 10 Amps |
| Maximum Switching Voltage | 250 Volts |
| Minimum Switching Voltage | 3.3 Volts |
| Number of Terminals | 2 |
| Specification Met | cULus |
| UPC | 724545020568 |
| Manufacturer | Teyleten Robot |
| Country of Origin | USA |
| Model number | RK-S1B4-G97L |
| Specific Product Use | personal |
| Item Weight | 0.28 g |
| Product Dimensions | 7 x 1.7 x 2 cm; 0.28 g |
| Item model number | RK-S1B4-G97L |
| Item Height | 20 Millimeters |
| Item Width | 17 Millimeters |
| Are batteries included? | No |

## Product Details

- **Connector Type:** Crimp
- **Contact Material:** Silver
- **Contact Type:** Normally Open
- **Current Rating:** 10 Amps
- **Mounting Type:** Screw Mount

## Images

![Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5) - Image 1](https://m.media-amazon.com/images/I/71vU7NaGpsL.jpg)

## Questions & Answers

**Q: I'm still not clear with the jumpers are for.  What does optoisolation do here?**
A: There are a few reasons why you would use isolation here. By the way, jumpers are for isolation - although the top jumper is futile. To use the optoisolator, disconnect the bottom jumper and connect the left pin to ground for the signal coming in to the board and connect the right pin to the ground of the voltage that activates the relay. The VCC should be connected to the voltage source that operates the relay (or if you want to remove the top jumper, vcc goes to the right pin, however it is the same as leaving the jumper on and just wiring it to the vcc input on the board. - I have used this setup to run a bank of relays off of an esp32. This allows you to run many relays without any significant voltage drop on the esp32. You will need to provide an alternate vcc for the relays. Imagine running 15 relays off of the ESP32. That would possibly cause a voltage issue on the board. If all you need to do is run 15 tiny leds (I guess 30 if you include the indicator on the board) your voltage drop would be much much lower. Because this uses optoisolation, the circuit that sends the signal (usually a microcontroller) and the voltage that powers the relay, can be totally isolated. You could use a battery for one and a computer usb for the other - no common ground between the two.  -- Not pointless by any means, but the circuit setup for this is goofy and causes you to scratch your head for a minute.

**Q: Will 3v power the relay?**
A: 3V ok

**Q: I want to run this realy on a 2 AA battery box (3v total) do i need to do anything with jumpers?**
A: No need to change, 3V ok

**Q: I put 3.3v on vcc and grounded gnd. when i put 3.3v on in, the red led lights, but the relay doesn't close. is there something i'm missing here?**
A: It should work.  You are controlling a Transistor that is operating the relay.    Make sure there is enough current in VCC to activate the relay.  LED will light with only 1.3v and very little current.  The relay must have 3.3V VCC.  Also make sure your Arduino output line has the same ground as board.  Using separate power supplies can cause the problem.  Otherwise, I need more details about your connection.

## Frequently Bought Together

- Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
- AEDIKO 4pcs DC 5V Relay Module - 1 Channel Relay Switch Board with Optocoupler Isolation, High or Low Level Trigger
- ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Ribbon Cables Kit Compatible with Arduino Projects

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.gr/products/514649383-teyleten-robot-dc-1-channel-optocoupler-3v-3-3v-relay](https://www.desertcart.gr/products/514649383-teyleten-robot-dc-1-channel-optocoupler-3v-3-3v-relay)

---

*Product available on Desertcart Greece*
*Store origin: GR*
*Last updated: 2026-03-03*