---
product_id: 504982628
title: "Beck Arnley Ignition Switch - 201-1794"
brand: "beck/arnley"
price: "€ 133.36"
currency: EUR
in_stock: true
reviews_count: 5
url: https://www.desertcart.gr/products/504982628-beck-arnley-ignition-switch-201-1794
store_origin: GR
region: Greece
---

# Compact design OE fit Corrosion resistant Beck Arnley Ignition Switch - 201-1794

**Brand:** beck/arnley
**Price:** € 133.36
**Availability:** ✅ In Stock

## Summary

> 🔑 Unlock Reliability with Every Turn!

## Quick Answers

- **What is this?** Beck Arnley Ignition Switch - 201-1794 by beck/arnley
- **How much does it cost?** € 133.36 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.gr](https://www.desertcart.gr/products/504982628-beck-arnley-ignition-switch-201-1794)

## Best For

- beck/arnley enthusiasts

## Why This Product

- Trusted beck/arnley brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Tailored Fit:** Engineered specifically for your vehicle's wiring harness and ignition cylinder.
- • **Durable Design:** Crafted with premium materials to resist corrosion and ensure longevity.
- • **Seamless Integration:** Perfectly matches OE form, fit, and function for hassle-free installation.
- • **Precision Engineering:** Designed with mechanical and electrical lift types for optimal performance.
- • **Lightweight Performance:** Weighing in at just 227 grams, it won’t weigh you down.

## Overview

The Beck Arnley Ignition Switch (Model 201-1794) is a high-quality replacement part designed to match original equipment specifications. With a lightweight design and premium corrosion-resistant materials, this switch ensures reliable performance and a perfect fit for your vehicle's wiring harness and ignition cylinder.

## Description

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

## Features

- Matches OE form, fit and function
- Switch only - does not include steering lock
- Premium materials that include corrosion resistant contacts
- Made to fit OE wiring harness and ignition cylinder
- Application specific for this vehicle

## Technical Specifications

| Specification | Value |
|---------------|-------|
| Manufacturer | Beck/Arnley |
| Brand | Beck/Arnley |
| Model | Ignition Switch |
| Product Dimensions | 10.92 x 5.08 x 17.78 cm; 226.8 Grams |
| Item model number | 201-1794 |
| Exterior | Machined |
| Manufacturer Part Number | 2011794 |
| Lift Type | Mechanical,Electrical |
| Item Weight | 227 g |

## Product Details

- **Brand:** Beck/Arnley
- **Circuit Type:** 1-way
- **Connector Type:** Molex
- **Contact Type:** Normally Open
- **Current Rating:** 20 Amps
- **Item dimensions L x W x H:** 4.3 x 2 x 7 inches
- **Material:** [MI] Stainless Steel, Aluminum, or Brass
- **Operation Mode:** Mechanical,Electrical
- **Switch Type:** Ignition Switch
- **Terminal:** Screw

## Images

![Beck Arnley Ignition Switch - 201-1794 - Image 1](https://m.media-amazon.com/images/I/61mabQzaAwS.jpg)
![Beck Arnley Ignition Switch - 201-1794 - Image 2](https://m.media-amazon.com/images/I/61Z7yLbAk4S.jpg)
![Beck Arnley Ignition Switch - 201-1794 - Image 3](https://m.media-amazon.com/images/I/61hA3Hhr5CS.jpg)
![Beck Arnley Ignition Switch - 201-1794 - Image 4](https://m.media-amazon.com/images/I/61vjV7nSLAS.jpg)
![Beck Arnley Ignition Switch - 201-1794 - Image 5](https://m.media-amazon.com/images/I/610KzuWkfjS.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ 







  
  
    worked great!
  

*by J***O on Reviewed in Canada on 5 August 2023*

Fit my vehicle as described

### ⭐⭐⭐⭐⭐ 







  
  
    Fixed random stalling of 1998 Honda C-RV.
  

*by C***1 on Reviewed in the United States on 8 April 2018*

This fixed my random stalling and no starts on my 1998 Honda CRV.  There is a known problem with the ignition switch on first generation Honda CR-Vs.  I talked to a tech at Honda who tried to tell me my random stalling was not the ignition switch because I would be able to shake the keys in the ignition to get it to stall but that was not happening.  No matter how much I tried to shake the key I could not force it to stall.  He also said if it were the ignition switch it would always start back up right away which was not always the case. Sometimes it would and other times I'd have to wait minutes or let the engine try to turn over for several seconds.  He didn't know what he was talking about because I replaced the switch and now my car does not stall while driving.  It would normally stall about 15 minutes into my drive then stall 4-5 more times within the next several minutes of driving after restarts.  Eventually it would stop stalling and continue to drive until the next day after the car sat.  Again it would start stalling around 15 minutes into my drive.  Sometimes the engine would cut in and out.  It was just like someone quickly turned off the ignition then back on right away.This is an easy fix.  You only need to drop the lower dash panel on the driver side.  It's just two screws and some clips. The ignition switch screws into the back of the mechanical portion of the ignition switch that you put your key into with two Phillips head screws.  You'll. Need to cut a few zip ties to remove the old wire harness and unplug the two connectors.  You'll need a few new zip ties to hold the new wire harness in place.Now, if this does not fix your stalls here's what else it could be:1). Main relay (for fuel injectors and fuel pump behind the lower passenger side dash panel). Another easy fix. Remove the glove box held be two screws and the lower passenger side dash.  You'll need a 10mm socket to remove the bracket holding the main relay in.2) Ignition control module (ignitor).  This is inside the distributor next to the ignition coil.  Not too hard of a job. You need to remove the air filter assembly and take the distributor cap, rotor, and rotor cover off to get to it.  It's held on by a few screws with wires going to it.  There is a heat sink on it you will need to move to the new ignitor.  The hardest part is lining up the screw that holds the rotor on with the slot in the rotor cover to reach it with a screw driver.  You'll need to "bump" the motor by quick turns off the key until the rotor lands in the right position to reach the screw.3) Ignition coil.  This is not as likely unless your car doesn't start at all but you could still have a weak coil which could cause intermittent stalls.  It's next to the ignition so it's basically the same job as removing the ignitor.4) Spark plugs, rotor, and rotor cap.  If any of these or combination of are really bad you could stall and have a hard time starting the engine.  This is less likely unless your engine runs poorly too.How do I know this because I changed all these things because the Honds tech told me it couldn't be the ignition switch.  Don't listen to the Honda techs.  They don't want to take the time to look up your VIN to see if your ignition switch was covered under the recall or they are just plain ignorant of the recall problem that happened around 18 years ago.I never got to the fuel pump but that's the last thing I would have replaced had the ignition switch not fixed my problem.  There's always there remote chance of a bad electrical connection somewhere like a ground wire or bad fuse panel under the dash.  If you are here reading reviews I'd start by replacing the ignition switch first.  The electrical part with wire harness not the mechanical part with the key tumbler.So I took the old switch apart and what I found was all the contact points looked like they were covered in carbon.  They looked more dirty than burnt.  It looked and felt like soot.  I was able to clean them with a q-tip and fine sandpaper.  I probably could have reused the old switch but since I bought a new one on Amazon for only $28 I didn't bother of want to chance it.  If you do want to try cleaning and reusing the original switch be careful taking it apart so you don't break any of the clips that hold it together.  You will need to pry up on several clips simultaneously.  Not easy.  I've attached an image of what the dirty contacts looked like in the old ignition switch.  Hope this helps someone.  Took me over a week the hard way to figure out my problem.

### ⭐⭐⭐⭐⭐ 







  
  
    Would recommend this item to everyone!
  

*by J***N on Reviewed in Australia on 30 May 2023*

Item was as advertised , very happy with it.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.gr/products/504982628-beck-arnley-ignition-switch-201-1794](https://www.desertcart.gr/products/504982628-beck-arnley-ignition-switch-201-1794)

---

*Product available on Desertcart Greece*
*Store origin: GR*
*Last updated: 2026-03-06*