---
product_id: 41797532
title: "HobbyKing OrangeRx R614XN DSM2/DSMX Nano Indoor DIY Receiver with cPPM & PWM"
brand: "hobby king"
price: "€ 0.51"
currency: EUR
in_stock: true
url: https://www.desertcart.gr/products/41797532-hobbyking-orangerx-r614xn-dsm2-dsmx-nano-indoor-diy-receiver-cppm
store_origin: GR
region: Greece
---

# HobbyKing OrangeRx R614XN DSM2/DSMX Nano Indoor DIY Receiver with cPPM & PWM

**Brand:** hobby king
**Price:** € 0.51
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** HobbyKing OrangeRx R614XN DSM2/DSMX Nano Indoor DIY Receiver with cPPM & PWM by hobby king
- **How much does it cost?** € 0.51 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.gr](https://www.desertcart.gr/products/41797532-hobbyking-orangerx-r614xn-dsm2-dsmx-nano-indoor-diy-receiver-cppm)

## Best For

- hobby king enthusiasts

## Why This Product

- Trusted hobby king brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

This is the smallest OrangeRx receiver on the market at this moment, it measures an infinitesimal 11.7 x 11.7mm and is only 3mm thick and weighs just 0.5g before any wiring is added. This is a DIY receiver that requires the connections to be soldered directly to it, therefore saving the weight and bulk of connectors.The R614XN is a full 6ch receiver, it has 6 PWM outputs for conventional use or a 6ch cPPM output which allows for single line connection of compatible devices. It is compatible with DSM2 and DSMX 1024/2048 aircraft radio and module systems and has a built in smart failsafe with ultra-fast brownout recovery feature.The smart failsafe feature if the signal is lost for a period of less than a second all channels will hold their last command, if the loss of signal is longer than one second then the controls will go to the predetermined position which you have set (ie: closed throttle etc). The fast brownout recovery feature will recover from say a minor power loss or a brief signal with only a slight glitch being seen, recovery is almost instant.Features:• DSM2/DSMX 1024/2048 compatible• Extremely small, only 11.7 x 11.7 x 3mm• Very lightweight, only 0.5g without wiring• 6ch cPPM output allowing for single line connection with compatible devices• 6ch PWM outputs for conventional use• Programmable smart failsafe• Fast brownout recovery system• Wide input voltage, 3.7~9.6VSpecs:Model: R614XNChannels: 6 x PWM, 6 x cPPMInput Voltage: 3.7~9.6VDimensions: 11.7 x 11.7 x 3mmWeight: 0.5g (without wires)*Note:1) This is not a Spektrum DSM2/X product, nor is it a copy of a Spektrum DSM2/X product. The Spektrum and DSM2/X brand is a trademark of Horizon Hobbies USA.2) This is not an underground black market fake Spektrum product. OrangeRx quality is guaranteed.3) Accepted by the MAAA in Australia, see the MAAA MOP58 for guidanceSee under the 'Files' tab for the instruction manual.

## Images

![HobbyKing OrangeRx R614XN DSM2/DSMX Nano Indoor DIY Receiver with cPPM & PWM - Image 1](https://m.media-amazon.com/images/I/31R3Mn46lyL.jpg)

## Questions & Answers

**Q: how do you bind it? i tried and it has power going to it, though the light blinks and shuts off when plugging in. im trying to use cppm for my micro**
A: Shorten cPPM and GND pins with twizzle or piece of wire. 2. Apply power to the receiver. It can be from 3.7 to 9.6 volts DC. Double check make sure you have the correct pinouts connected. (GND to cPPM)3. You will see the orange LED rapidly blinking. That means the receiver is in Bind mode. 4. Follow the procedures of your specific transmitter to enter Bind Mode, the system will connect within a few seconds. Once connected, the orange LED on the receiver will blink several times and go solid indicating the system is connected.5. Remove the twizzles/wire you used to jump the pins on the receiver (GND and cPPM) before you power off the transmitter.

**Q: My receiver consistently goes into bind mode when i disconnect and reconnect to the battery. sat bind is set to 0, the pins were never bridged. it went into bind mode the second i connected it to power. has anyone else had this, and fixed it?**
A: go to CLI tab and type "set spektrum_sat_bind = 0" and then type "save". This must be done so that satellite doesn't go back to binding mode when the Flight controller is repowered again.

**Q: Where is ground ????**
A: It is labeled ground on the board, in between the rudder & Elevator holes.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.gr/products/41797532-hobbyking-orangerx-r614xn-dsm2-dsmx-nano-indoor-diy-receiver-cppm](https://www.desertcart.gr/products/41797532-hobbyking-orangerx-r614xn-dsm2-dsmx-nano-indoor-diy-receiver-cppm)

---

*Product available on Desertcart Greece*
*Store origin: GR*
*Last updated: 2026-03-14*